Product Description

ManualsBrandsZhuhai Quin Technology ManualsComputers & AccessoriesMini Printer

Product Description

Open cover switch

Reset

USB interface

Paper Exit

Power button

Power Indicator

Power indicator status

Green light is steady

Charging competed

Flashing green light

Charging

Red light is steady

Fault:out of paper/overheating

Flashing red light

Low battery

Battery Warning Description

Never disassemble,impact,squeeze or put into fire:

If there is severe swelling,do not continue to use;

Do not put in a high temperature environment.Do not use if immersed in water;

Be sure to replace with an appropriate type of battery.(There is danger of explosion if you

replace it with the wrong type of battery.)

Be sure to dispose of the used battery as instructed.

Summary of content (7 pages)

PAGE 1
Product Description Open cover switch Reset USB interface Paper Exit Power button Power Indicator Power indicator status Green light is steady Charging competed Flashing green light Charging Red light is steady Fault:out of paper/overheating Flashing red light Low battery Battery Warning Description Never disassemble,impact,squeeze or put into fire: If there is severe swelling,do not continue to use; Do not put in a high temperature environment.
PAGE 2
Operation Guidance 1.Fully charge the battery before using the first time.To turn on the machine,press and hold the power button for 3 seconds. 2.Search for Phomemo and download the App. 3.Turn on bluetooth,search for the device in the App and connect.
PAGE 3
Paper Replacement 1.Replace the paper by pushing the switch on the printer to open the cover. 2.Take out the adjustable plate.Open the adjustable plate slightly,install the paper roll in the plate and close it. 3.Place the paper roll into the printer and straightened the paper as shown in the picture above.
PAGE 4
Attention 1 2 3 4 5 6 7 Insert or pull out the charge cable gently to avoid any damages to the port. Pull out the cable after charging is complete. Do not change or use the printer in high temperature,high humidity,or foggy circumstances(e.g. In a bathroom,a stream room or beside a fire)which may be dangerous.(NOTE:This machine si not suitable for tropical environments) Improper charging methods may cause damages to the print head. Do not touch the print head in case of high temperature.
PAGE 5
Product Warranty Description Thank you for choosing Phomemo. 1. The free warranty period is 1 year from the date of purchase. 2. Within 30 days from the date of user’s receipt,the user can choose to return. Please save the warranty/maintenance card properly.The warranty/maintenance card will not be replaced if lost. Non-warranty regulations The warranty is void under the following conditions: 1 2 3 4 5 6 7 Exceeding the warranty period. Not presenting the original warranty/maintenance card.
PAGE 6
Warranty/Maintenance Card □Replace □Return Name: User info Product information Return, Replace, or Repair Request Maintenance records □Repair Gender: Phone: Address: Date of purchase: Product Order Number: Product Serial Number: Reasons: Fault condition: Maintenance staff: Processing situation: Repair date: Repair ticket number: Date of inspection: Product certification Inspector: Date of manufacture:
PAGE 7
FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.