Intelligent Touch Panel (Bluetooth + DMX / Programmable) UB1 UB2 UB4 Manual www. ltech-led.
Product Introduction The Intelligent Touch Panel is an American base wall switch, integrating Bluetooth 5.0 mesh protocol and DMX signals. It is a simple but elegant design with CNC aviation aluminum frame and 2.5D tempered glass. The panel is suitable for multi-scene and multi-zone lighting control applications. Working with Bluetooth systems makes it more convenient and intelligent.
Product Size Unit: mm 120 84 75 120 29.5 43.
Key Functions UB1 Brightness shortcuts 25%, 50%, 100% 1- 4 Zone keys Short press: Turn ON Select/Deselect the zone Long press: Turn OFF Short press: All ON/OFF Touch color circle (DIM) 4 Scene keys Short press: Play scene and save scene UB2 Color tone shortcuts Cool white Neutral white Warm white Short press: All ON/OFF 1- 4 Zone keys Short press: Turn ON Select/Deselect the zone Long press: Turn OFF Touch color circle (CT) Touch slider bar (BRT) 4 Scene keys Short press: Play scene and save scen
Key Functions UB4 16 modes Short press: Play mode Long press: Adjust speed 1- 4 Zone keys Short press: Turn ON Select/Deselect the zone Long press: Turn OFF Short press: ON/OFF RGB Short press: Turn ON/OFF white color Touch color circle (RGB) Touch slider bar (BRT) 4 Scene keys Short press: Play scene and save scene UB5 16 modes Short press: Play mode Long press: Adjust speed 1- 4 Zone keys Short press: Turn ON Select/Deselect the zone Long press: Turn OFF Short press: RGB OFF Long press: Adjust RGB
Key Functions UB8 Eight buttons Press it to execute the scene after setting the scene for the button on APP 5
Installation Instructions Step 1: Remove the panel plate with a flathead screwdriver, as shown below. Step 2: Attach the wires to the panel, as shown in the diagram below . Please be sure to turn off the power to the circuit at the circuit breaker or fuse box before attaching the wires.
Step 3: Install the panel plate. Once the wires are attached correctly, you can gently fold any excess wire and compress the panel into the junction box. Tighten the screws to secure the panel plate to the box. Glass panel cover Panel plate Junction box Step 4: Put the panel cover in place. Gently snap the panel cover onto the plate. Attentions Please use in spacious and open space. Avoid metal obstructions above and in front of products. Please use in a cool and dry environment.
Warning Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.