Quick Guide

Quick Guide
4. Add device to smart phone
Note: If user can’t setup device in above way, user can try below AP setup.
1. Device
2. Open cover and install battery
5. Click ‘Confirm
indicator rapidly
blink’.
6. Enter Wi-Fi
passward and click
‘Confirm’ button.
7. Wait until
connection
finished.
8. Input device
name and click
‘Done’.
9. Click device.
10.Enter device
control interface.
9. Choose Wi-Fi
hotpot ‘SmartLifi-
x x x ’ . A f t e r
connected to Wi-Fi
hotp ot, retur n to
the APP.
8. Click “Connect
now”.
5. APP Control
V190114-2
Warning: Device use CR123A 3V dry battery only. Rechargable
battery RCR123A 4.2V is forbidden.
Download the APP ‘ Smart’ from ‘Google Play Store’ or
‘APP Store’ and install on the smart phone. Click ‘HUANSO
Smart’ APP, register and log in the account.
3. Install the APP
1.Open ‘HUSNSO
Smart’ APP and
click ‘register ’.
2.Choose your
region, input your
mobile number or
email and click
‘Continue’.
3.Input the
verification code
from your email or
smart phone.
Note: Choose the
correct region. If
choose China, it
couldn’t support
Google pushing
notification.
4. Set your login
password and
click ‘Done’.
5. Click Add Home.
6. Enter home
name and set
geographic
location, then click
“Done” to confirm.
7. App will auto login
after registration
1. Add battery
3. Click “+” button.
2 . I n d i c a t o r
l i g h t r a p i d l y
blink twice per
second to enter
‘ S m a r t c o n f i g ’
setup mode.
4. Choose ‘PIR
sensor’. But
choose ‘Other
product’ from
other APP.
3. Click “+” button.
2 . W i - F i
indicator light
sl ow ly b li nk
o n c e pe r 2
s e c o n d s t o
e n t e r ‘ A P ’
setup mode.
4. Choose ‘PIR
sensor’. But
choose ‘Other
product’ from
other APP.
1. When Wi-Fi
indicator light
rapidly blinks
t w i c e p e r
second, long
p r e s s W i - F i
but ton fo r 5
seconds.
5. Click ‘AP Mode’.
7. Enter Wi-Fi
password and
click ‘Confirm’.
6. Click ‘Confirm
indicator slowly
blink’.
10. Wait until
connection
finished..
11. Input device name
and click ‘Done’.
12. Click device.
13. Enter device
control interface.
Back
The current state
of PIR
Alarm history
Alarm notification
switch
There are 2 modes to setup, ‘Smartconfig’ setup mode and ‘AP’ setup
mode.
User can long press device’s Wi-Fi button for 5 seconds to switch between
this 2 modes. Indicator light rapidly blink twice per second is ‘Smartconfig’
setup mode, user should click ‘Confirm indicator rapidly blink’ button in
APP to setup. Indicator light slowly blink once per 2 seconds is ‘AP’ setup
mode, user should click ‘AP Mode’ in the APP to setup.
Maybe you are using 5Ghz WiFi router, device don’t support 5Ghz WIFI,
user should use 2.4GHz WiFi router to connect.
Maybe you input wrong WIFI password. Please input correct password.
Maybe your router haven't open DHCP. Pls open DHCP in your router.
Maybe device is too far away from the Wi-Fi router. Pls put device close to
router or add Wi-Fi repeater.
Maybe your router ’s WiFi have special settings, pls reset your router.
6. FAQ
Maybe you use Android smart phone and you are in China mainland but
you register other country or Hong Kong APP user account then you can't
receive push notification. You should register APP China mainland user
account when you are in China mainland for Android smartphone.
Maybe you use Android smart phone and register China mainland user
account but you have stop APP in the smart phones' background, then
you can't receive push notification. Android smart phone APP China
mainland user account should keep APP running at Android smart
phone’s background to receive push notification alarm.
Maybe device is too far away from the Wi-Fi router. Pls put device close to
router or add Wi-Fi repeater.
Device will only send push notification alarm every 1 minute to save
battery. After 1 push notification it will not push alarm within 1 minute.
Maybe in APP-Device-Notice-Detection Alarm is disable. Pls enable it.
Maybe in APP-Profile-Settings-Push Notification is disable. Pls enable it.
Maybe when you install the APP you haven't allowed smart phone to
receive push notification of this APP. Pls check your phone's notification
center to enable receiving push notification of this APP.
Maybe you use Android tablet, device don't support Android tablet which
will close Wi-Fi if screen closed.
Maybe you had turn off your phone's 3G/4G network then you might miss
some push notification alarm when battery is low or WiFi is intermittently
disconnected. You should always turn on 3G/4G network to be receive
push notification all the time.
Q1: Why does the device can’t be connected?
A1,
2,
3,
4,
5,
6,
7. Specification
2pcs CR123A (3V) dry battery
(Note: Rechargeable battery RCR123A
4.2V is forbidden.)
6V
2 meters
5 meters
100 degree
2.4GHz
802.11b/g/n
1 year
Totally about 6000 times detection
About 1 year if each day 15 detections
About 6 months if each day 30 detections
Battery mode:
Operating Voltage:
Installation Height:
Detection distance:
Horizontal detect angle:
Wi-Fi Frequency:
Wi-Fi Protocol:
Standby Time:
Use Time:
More: Modify
device name,
Device sharing,
Device Info and
so on.
Battery status
Q2. Why I can't receive push notification alarm or miss some push
notification alarm?
A1,
2,
3,
4,
5,
6,
7,
8,
9,
“-”
“+”
“-”
“+”
Wi-Fi button. Long
press 5 seconds to
switch to different
set up mode.
Indicator light. L i g h t r a p i d l y
blink twice per second is in
‘Smartconfig’ setup mode.
Light slowly blink once per two
seconds is in ‘AP’ setup mode.
PIR infrared detector
Bracket
Press two sides of
the device then it
can be opened.
Indicator light. L i g h t
rapidly blink twic e per
second is in ‘Smartconfig’
setup mode.
Light slowly blink once
per two seconds is in ‘AP’
setup mode.