XPOS-I100 Smart handheld printer User guide ZHUHAI HONOR TECHNOLOGY CO.
Power Button Short press: Turn on/off the screen when power on. Long press: Hold few seconds to switch the power on. When power is on, hold for few seconds to show the Option Menu including ‘Power off’, ‘Airplane Mode’, ‘Settings’, ‘Lock Now’, and ‘Reboot’. VOLUME Button Adjusting the volume. Can be defined as quick launch button for applications which had been installed(Settings -> Volume key Customization). BACK Back to the last scene/application.
HOME Back to home screen. MENU Show recently opened apps. Tap on the app to open the app, or slide the app to left/right to close it. Printing head The thermal printing head. Notification LED Solid green light when XPOS-I100 is charging and the battery is fully charged. Flashing green light when you have a pending notification. Solid red light when the battery is being charged. Paper cover handle Open the paper cover. Paper cover Open this cover to install/replace the roll paper.
Speaker Sound comes out from here when playing music or movie. The sound that prompts the Printer’s status, like run out of paper or overheat, also comes out from here. Camera Scan QR code or bar code. Charging Contact Use to charge with the Charging base (keep away from water, metal object and other electrified equipment).
Headset The headset jack. Micro SIM Card The Micro SIM Card slot. Note: when inserting or removing the microSIM card, please make sure the XPOS-I 100 is power off, otherwise it may cause damage to the hardware. To insert the microSIM card, firstly open the soft cover，then insert the sim card into the slot that the picture shows with its metallic side UP and the unfilled corner side OUT, finally close the soft cover.
schematic drawing of installing roll paper Installing the roll paper: ·Open the paper cover with the handle(see ①) . ·Remove the used roll paper core if any, then install the roll paper in the correct direction according to the Schematic drawing, remember to pull out some paper outside the cover (see ②). ·Close the paper cover back，finish installing roll paper(see ③)； Note: XPOS-I 100 only support 58mm roll paper width settings: 57±0.5mm*Ø 40mm.
BATTERY CAUTION · XPOS-I 100 use a 3.8 v/6000mAh built-in lithium battery, please do not disassemble by yourself. ·To protect the battery, it is recommended to charge in time when battery level is low, do not let the battery run out. Product Specifications Product Model: XPOS-I100 Operating System: Android 7.0 CPU: frequency 1.3GHz， 64 bit Quad Processor RAM: 1GB ROM: 8GB Display: 5.
In the Box XPOS-I 100 x1 Charging base x1 Power Adapter x1 USB cable x1 User Manual x1, Warranty Card x1, Product certificate x1 ☑58mm roll paper x1 □__________ Safety Precautions · Do not use in locations subject to high humidity or temperature. Excessive humidity and temperature may cause equipment damage, fire, or shock. · Keep the equipment away from fire or water. This may cause fire or electric shock. · Touch screen is fragile, please handle with care, avoid impacting or pressing.
Product Warranty Card Product Name: _________________________ Product Model: _________________________ Product Number: _________________________ Purchase Date: _________________________ Warranty Period：The warranty time is _____ days from the day when you have the invoice. Free maintain won't be given under the following circumstance: ·The malfunction and damaged caused by unauthorized repairs and alteration. ·Incomplete product bar code or Fragile Sticker.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment。 Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
