Oplink Communications RMC1300 User Guide I. Product Introduction RMC1300 is a 433MHz wireless remote control. Push the button, and it will send arm/disarm/panic signal to the system.
Oplink Communications II. Installation (1) Usage scenario: • Indoors and away from direct sunlight. • Away from extreme temperature sources and large metal objects. (2) Operation： • Unscrew the screw to open the back cover of Remote control. • Insert the battery noting the polarity (A23 battery); Slide back the cover and screw fastening with the front cove. III. User Instruction& Workflow (1) (2) (3) (4) Press “ ” once to set arm mode of the system. Press “ ” once to set disarm mode of the system.
Oplink Communications FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
