User Manual

Oplink Communications

1 / 3

DWM1300 User Guide

I. Product Introduction

DWM1300 is a 433MHz wireless Door/Window sensor, the sensor monitors the

status of the door/window, and sends signal to the host devise when illegal intruder

is detected.

System Structure

PAGE 1
Oplink Communications DWM1300 User Guide I. Product Introduction DWM1300 is a 433MHz wireless Door/Window sensor, the sensor monitors the status of the door/window, and sends signal to the host devise when illegal intruder is detected.
PAGE 2
Oplink Communications II. Installation (1) Determine the location of the Door/Window Sensor, which should be placed: • Indoors and away from direct sunlight. • At the most vulnerable door or window near key entry/exit points • Away from extreme temperature sources and large metal objects (2) Installation and Operation： • Unscrew the screw fastening the back cover of the transmitter. Slide the rear cover down. • Insert the battery noting the polarity (AAA battery*2) and close the cover.
PAGE 3
Oplink Communications FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.