version:1.0 User Manual Body Fat Analyzer GBF-1319-B6 Thank you very much for selecting the Transtek Body Fat Analyzer GBF-1319-B6. ZHONGSHAN TRANSTEK ELECTRONICS CO., LTD No.23,Jin'an Road, Minzhong, Zhongshan, 528441, Guangdong, China TEL:86-760-88282982 www.transtek.cn Please do read the user manual carefully and thoroughly so as to ensure the safe usage of this product, and keep the manual well for further reference in case you have problems.
Table of Contents Table of Contents Safety Information Safety and Usage Information ................................................................................................... 2 Your Scale and Its Environment ............................................................................................... 3 Efficient Use of Your Scale ...................................................................................................... 3 Overview Device Components ....................................
Safety Information Safety Information Safety and Usage Information INDICATIONS FOR USE The warning signs and symbols are essential to ensure your correct and safe use of this product and protect you and others from injury.
Overview Overview Device Components LCD Display Electrode LCD Display Down Button Set Button Up Button Battery Compartment List 1. Body Fat Analyzer GBF-1319-B6 2. Three AAA-size Batteries (1.5V per each) 3.
Initial Start-Up Initial Start-Up General Instructions Select Measurement Unit Transtek Body Fat Analyzer GBF-1319-B6 applies BIA (Bio-impedance Analysis) technology. A small amount of weak current flows through the human body so as to detect the bio-impedance and estimate calorie, BMI, body fat, body water, muscle mass and bone mass. The electrical current is small and may not be felt. This BIA technology is cheap, safe, non-invasive, toxic-free and harmless.
Initial Start-Up Set Up Your Profile The body fat analyzer GBF-1319-B6 supports multiple users (Up to 8). You may follow below instructions to assign User ID and set up your own profile, including Gender, Stature, and Age. 1.Assigning User ID With batteries correctly installed, press “SET” key when the LCD displays 0.0 to enter setting mode. Initial Start-Up 4.Setting Age After confirming Stature, the system will divert to Age setting. As pictured below, the digits “30” blinks.
Start Measuring First Measurement Please process the user setting before your first measurement. (Refer to Set Up Your Profile for more details) STEP 1: Step on the platform barefooted when the LCD display “0.0”. STEP 2: Stand still and the weight data will be locked with blinking twice when the weight is stable. Keep full contact with the scale until the LCD stops displaying moving “o”.
Data Transmission Troubleshooting When your scale is successfully paired with your smartphone and the Bluetooth is ON, GBF-1319-B6 will process data transmission. (Please refer to Data Transmission for more details.) Error Prompt Error Data Transmission Overload. The device will power off. With GBF-1319-B6 successfully pair-up with your smartphone, the measurement data will be transmitted to your mobile via Bluetooth. Low Battery. The device will power off.
Troubleshooting Problem Abnormal measuring results: - Too high; OR - Too low; OR - Huge difference between two recent measurement. Troubleshooting Root Cause Your feet are too dry. Worn batteries. 14 Wipe your feet with a damp cloth, keeping them slightly damp when starting measurement. Data transmission failed. No display on LCD when the device powers on. The device powers off. When Data Transmitting ... Problem Batteries not yet installed.
Specifications Maintenance Specifications Product Name When carrying out usual maintenance, please ensure practice of the following Do’s and Don’ts: Dimension Scale: 321x321x23.5mm (Approximately) Net Weight Approximately 1.98kg ( Including the dry cells) DO use a dry soft cloth to wipe the dust. Digital LCD DO use a wet soft cloth, dipped into water and wrung out, to wipe the dirt. Then use a dry soft cloth to dry up the device.
Appendix FCC Regulations FCC User Guide Information Radio Frequency Interface Requirements - FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Appendix Appendix Health Tips - About Body Water Body water is the single most important component of body weight. It represents over half of your total weight and almost two thirds of your lean body mass (predominantly muscle). Water performs a number of important roles in the body: All the cells in the body, whether in the skin, glands, muscles, brain or anywhere else, can only function properly if they have enough water.
Appendix Health Tips - About BMI Maintaining proper weight is essential to healthy living. Obesity has been linked to a higher risk of heart disease, diabetes and some forms of cancer. The Body Mass Index (BMI) is the most widely accepted measurement of weight according to health professionals. The Analyzer will calculate your BMI on your height and weight.
Appendix Appendix Table 2 Table 3 Guidance and manufacturer’s declaration - electromagnetic Immunity Guidance and manufacturer’s declaration - electromagnetic Immunity Test Frequency (MHz) Band (MHz) Service Modulation Modulation (W) Distance (m) 385 380 – 390 TETRA 400 Pulse modulation 18 Hz 1,8 0.3 IMMUNITY TEST LEVEL (V/m) 27 450 430 – 470 GMRS 460, FRS 460 FM ± 5 kHz deviation 1 kHz sine 2 0.3 28 interruptions and voltage 710 LTE Band 13, 17 Pulse modulation 217 Hz 0.
