37" HD Soundbar + Wireless Subwoofer
Safety Instructions & Warnings CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE D' ÉLECTROCUTION NE PAS OUVRIR Warning: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Important Safety Instructions • • • • • • • • • • • • • • Read these Instructions. Keep these Instructions. Heed all Warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Table of Contents Setup ���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 5 Features & Specifications Includes Power Remote Batteries Orientation ���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 6 Rear View Speaker Inputs Detail Front View
Setup Features & Specifications • 37" length • Full-function remote with learning capability • Wireless subwoofer • Optical digital audio input • Supports Bluetooth • Line In (3.5mm audio input) • Wireless range: 60 ft. • Aux In (RCA stereo audio inputs) • 2.
Orientation Rear View OPTICAL IN LINE IN R AUX IN L SUB OUT DC IN Wall Mount Pegs Speaker Inputs Speaker Inputs Detail OPTICAL IN Optical Input Line In ( 3.
Front View Remote IR Receiver & Function Indicator Lights Speaker Controls (Right Side) Power Press to power the unit ON or OFF. Source/Connect Press to switch between Optical, Line In, Aux In, and Bluetooth modes. POWER Press and hold to wirelessly connect to the subwoofer (see pg.12). SOURCE/CONNECT Volume +/Press to adjust the volume up or down. Pair/Learn Press and hold to begin pairing to a Bluetooth device. With the soundbar OFF, press to begin using the Learn Feature (see pg.13).
Remote Power Press to turn the unit on or off. Press to switch to Bluetooth Mode. Line In Press to switch to Line In mode. Optical Press to switch to Optical mode. AUX Press to switch to Aux In (RCA) mode. Music Press to switch to the EQ optimized for music. Movie Press to switch to the EQ optimized for movie sound. Dialog Press to switch to the EQ optimized for dialog. 8 Mute Press to mute the volume. Treble Press to adjust the treble up or down. Bass Press to adjust the bass up or down.
Bluetooth Wireless Pairing to a Bluetooth Device and Playing Audio Wirelessly 1. With the unit powered ON, press the button on the remote to switch to Bluetooth Mode, indicated by a slowly flashing blue light. You can also press the Source button on the side of the unit. 2. Press and hold the Pair button on the side of the soundbar until the pairing indicator begins quickly flashing blue. When pairing, remain within 3 feet of the unit. 3.
Audio Inputs Aux In (Stereo RCA Inputs) Requires RCA stereo audio cable (not included). When connecting an RCA stereo audio cable (Red/White), match the colored ports to their corresponding plugs. 1. Connect the RCA stereo audio cable (not included) to the RCA Stereo Inputs on the soundbar and the audio outputs on a television or other audio source. 2. Power ON the soundbar and press the Source button to select Aux In Mode, indicated by a white light. 3.
Aux In (Stereo RCA Inputs) - Detail OPTICAL IN LINE IN R AUX IN L SUB OUT DC IN Optical Input - Detail OPTICAL IN LINE IN R AUX IN L SUB OUT DC IN Line In - Detail OPTICAL IN OPTICAL IN LINE IN R AUX IN L SUB OUT LINE IN R AUX IN L SUB OUT DC IN 11 DC IN
Subwoofer Connecting the Wireless Subwoofer 1. With the soundbar and subwoofer powered ON, press and hold the Source/Connect button on the soundbar until the Power LED begins flashing red. 2. Press the Connect button on the subwoofer until the Connect LED on the subwoofer begins flashing. 3. The units are connected when both LEDs turn solid. When audio is played through any source, the speaker will automatically use the connected subwoofer.
Learn Feature What is the Learn Feature? This will teach the soundbar to function with a separate remote control, such as the remote for your television or a universal remote. Teaching the bar speaker remote commands will reduce the number of remotes needed and generally improve the ease of operation. Power, volume and mute are a examples of commands that the soundbar can learn. Note: While the soundbar is able to learn most commands and IR protocols, not all can be programmed.
Company Information Contact Information Warranty Website: www.iLiveElectronics.com For Warranty Information and the most up-to-date version of this User’s Guide, go to: Email Support: prodinfo@dpiinc.com Email Parts: partsinfo@dpiinc.com www.iLiveElectronics.com Phone Support: 1-888-999-4215 International Support To download this User’s Guide in English, Spanish, and French, or to get answers to frequently asked questions, visit the support section at: www.iLiveElectronics.
