BTR020N Bluetooth HD transmitter and receiver 2 in 1 User’s manual FCC ID: WAD-BTR020
Welcome to use this Bluetooth stereo transmitter and receiver, BTR020N. Please read this user’s manual carefully before use. Before use 1. About BTR020N BTR020N is a Bluetooth stereo transmitter and receiver with optical in and optical output function. When it is used as a Bluetooth transmitter, it can be connected to your walkman or PC to wirelessly transmit the music to your Bluetooth stereo receiver.
. Overview
1 Optical mode indicator light 7 3.5mm AUX Audio Out jack 2 Bluetooth indicator light 8 3 NFC zone Digital Optical Audio Out jack Digital Optical Audio In jack 4 AUX: 3.5 mode indicator 9 5 Multi-function (MFB): Turning switching mode button on/off, 6 Micro USB charging jack 10 3.5mm AUX Audio In jack 11 TX\RX toggle switch Getting started 1. Turn on/turn off BTR020N support Micro USB charge.
Function Turning on BTR020N Operation Switch the MFB button to on Turning off BTR020N Switch the MFB button to off Entering pairing mode Switch MFB button to location for 2 seconds and release LED indicator Bluetooth indicator light flashes All indicator light are off Bluetooth indicator light quickly flash 2. TX mode 1) Selecting TX mode a) Selecting mode: Please turn the TX/RX switch to TX mode b) Connection: In TX mode, please connect 3.
2) Pairing with Bluetooth receiver Pairing with a Bluetooth receiver a) Ensure it is in TX mode, otherwise reset it to TX mode. b) Keep BTR020N and the receiver within 1 meter when pairing, the closer the better c) Make both devices enter pairing mode. d) BTR020N will search for Bluetooth devices and finishing pairing automatically. After successful connecting, Bluetooth indicator light will be ON status constantly. Pairing with two Bluetooth receivers a) Pairing BTR020N with device one.
c) Restart device one and it will connect with BTR020N automatically. Then BTR020N has already connected with two devices at the same time. Remark: The pairing mode will last 2 minutes. BTR020N will enter standby mode if no devices can be connected within 2 minutes. Every time BTR020N is turn on, it will automatically connect to the last device. It can’t connect to two devices simultaneously. If you want to pair with two devices, please active the other device to connect.
(2) Optical audio input mode After successfully connected with Bluetooth receiver, ensure digital optical Audio in jack is connected to media player, and optical red backlight is on. Otherwise, switch MFB button to location once time. Playing music in media player, then you can receive music from receiver.
(3) Switch input mode In the status of connected to a device, switch MFB button to the right side to changing-over from 3.5 audio input mode and optical audio input mode. Remark: Please keep BTR020N input mode and media player mode the same. Only connected to a Bluetooth device, you can switch input mode. 3. RX Mode 1) Selecting RX mode a) Selecting mode: Please turn the TX/RX switch to RX mode b) Connection: In RX mode, please connect 3.
2) Pairing with Bluetooth transmitter Pairing with a Bluetooth cell phone a) Ensure it is in RX mode; otherwise reset it to RX mode. b) Keep BTR020N and Bluetooth cellphone within 1 meter when pairing, the closer the better c) Make BTR020N enter pairing mode. d) Active Bluetooth function of call phone, search Bluetooth device, selects “BTR020N”. After successful connecting, Bluetooth indicator light will be ON status constantly. Remark: The pairing mode will last 2 minutes.
switch the MEB button to the right side once time, it will connect to the last connected devices automatically Pairing with a Bluetooth cell phone via NFC. If your cell phone support near field communication (NFC), please active NFC function in your cell phone and turn on BTR020N. Use the BTR020N NFC zone to touch the cell phone NFC zone for few seconds. BTR020N will pair with your cell phone automatically Remark: It can not connect via NFC if your cell phone is on dormant status.
3) Playing music (1) 3.5 audio input mode After successfully connected with Bluetooth cell phone, ensure 3.5mm AUX audio out jack has connected to other speaker devices. AUX red backlight is ON. Otherwise, switch MFB button to location once time. Playing music in cell phone, then you can receive music from speaker. (2) Optical audio input mode After successfully connected with Bluetooth transmitter, ensure digital optical Audio out jack is connected to other speaker devices.
(3) Switch input mode location once time can In connecting status, switch MFB button to changing-over from 3.5 audio mode and optical audio mode. Remark: Please keep BTR020N output mode and audio devices mode in the same. Only connected to a Bluetooth device, you can switch input mode. 4. Factory reset In the status of power on, switch MFB button to location for 6 seconds and release it until three LED are ON.
mode). After factory reset, Bluetooth pairing list will be deleted, you need repairing in next time. Cleaning pairing list in any mode, another mode of paring list will also be deleted. Care and maintenance Before using BTR020N, please read the following recommendations, it will help you to enjoy the product for many years. Do not expose the product to liquid, moisture or humidity to avoid the product’s internal circuit being affected.
FAQs 1. Why BTR020N can’t pair and connect to a Bluetooth device? Make sure the audio mode is right. In TX mode, it can only pair with Bluetooth receiver. In RX mode, it can only pair with Bluetooth transmitter. And both should in available range. 2. In TX mode, why Bluetooth receiver can’t receive any sounds? 1) Make sure the media player is connected to Audio in jack, not audio out jack. 2) Ensure the current audio mode is correct. When AUX LED indicator light is on, connect to 3.55 AUX audio in jack.
Specifications Bluetooth specification Bluetooth profiles Frequency range Operating distance Charging input voltage Dimensions Weight Bluetooth V4.1 A2DP, AVRCP 2042MHz–2480MHz Up to 10 meters DC 5V 99.6*23.6*23.6mm About 25g FCC Statements: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.