BTR016 Bluetooth stereo receiver User’s manual
Content 1. 2. 3. 1. 2. 3. 4. 5. Before use…………………………………………………...…1 About BTR016…………………………………………...…….1 System requirements………………………………...…………1 Overview...................…………………………………...……...1 Getting started…………………….……………………………2 Charging....................………………..………………………....2 Turning on/off the receiver………..…………………………...2 Pairing with Bluetooth devices…………..………………….…3 Playing music...…………..…………………………………….5 LED indicator…………..……………………………………...5 Care and maintenance………….
Welcome to use this Bluetooth stereo receiver BTR016. Please read this user’s manual carefully before use. Before use 1. About BTR016 BTR016 is a stereo Bluetooth receiver. You can use a common audio device with 3.5mm audio in jack for playing any stereo Bluetooth-enabled device’s music after plugging in BTR016. The product comes with a built-in rechargeable battery, it can be used for about 15 hours after being charged fully. 2. System requirements Audio device with 3.
Getting started 1. Charging First time charging: Please charge the battery fully before first use the receiver. Low battery: : When you see the red LED flashed once every 20 seconds and hear three Tones during use, the battery is low power and needs to be charged. 1. Plug the USB cable into the USB jack of PC or charger 2. Plug the other end of USB cable into the charging jack of receiver RED light on→ →Charging RED light off→ →Finished charging 3. It will take about 3 hours to finish charging 4.
4. Pairing with Bluetooth devices 1) How to enter pairing mode Function Operation LED indicator red and blue LED flashes alternately Entering pairing mode Indication tone Two “DU” tones Ensure the receiver is turned off, otherwise turn it off first and then press and hold MFB button for 6~7 seconds until red and blue LED flashes alternately Remark: The pairing mode will last 2 minutes, the receiver will switch to standby mode automatically if no devices can be connected over 2 minutes.
Every time the receiver is turned on, it will automatically connect to last connected device. If you want to pair it with other devices, please turn off the Bluetooth function of last connected devices first and pair the receiver with the new device according to steps 1~6 mentioned above. When the receiver is turned on and doesn’t connect to any devices, short press MFB button, it will automatically connect to the last connected device.
4. Playing music After BTR016 connect with Bluetooth device, and plug the 3.5mm audio cable of BTR016 into Bluetooth audio device, such as Bluetooth speaker. Now you can listen music wirelessly. Function Pause Status of BTR016 Playing music Play Pausing Operation Short press MFB button once Short press MFB button once Remarks: The music will automatically pause when you make a call or there is an incoming call. BTR016 hasn’t a microphone, so you need to switch the call to the mobile phone.
Care and maintenance Read the following recommendations before using the receiver. Following these you will be able to enjoy the product for many years. Do not expose the receiver to liquid, moisture or humidity to avoid the product’s internal circuit being affected. Don’t use abrasive cleaning solvents to clean the receiver. Do not expose the receiver to extremely high or low temperature as this will shorten the life of electronic devices, destroy the battery or distort certain plastic parts.
Specifications Bluetooth version Bluetooth profiles Bluetooth frequency range Operating distance Charging input voltage Working time Charging time Dimensions Weight Bluetooth V2.1+EDR A2DP and AVRCP 2.402GHz-2.480GHz 10 meters DC 5V About 15 hours About 3hours 42x34.5x16mm 16.3g Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.