User Manual

ManualsBrandsZhongshan K-mate General Electronics ManualsElectronicsBluetooth Audio Receiver

BTR011

Bluetooth audio receiver

User’s manual

Content

 Brief introduction…………………………………………….…....….1

1. Bluetooth wireless communication technology………….……………1

2. About BTR011………………………………………………………..…1



Basic operation………………………………………………….....…..1

1. Overview…………………………………………………...…...………1

2. The steps of operation………………….…………………….…………2

3. Paired with Bluetooth device……………………………………...……2

1) How to enter paired mode…………………………………………...….2

2) Pairing with Bluetooth phone……………………………………….….2

3) Pairing with Bluetooth transmitter………………………………..…...3

4. Supply power for other device charging………………………………3

5. LED indicator…………………………………………………………...4

 Care and maintenance……………………………..………..………4

 FAQs

……………………………………………………..…………..….5

 Specifications

………………………………………………………….5

Summary of content (7 pages)

PAGE 1
BTR011 Bluetooth audio receiver User’s manual Content Brief introduction…………………………………………….…....….1 1. Bluetooth wireless communication technology………….……………1 2. About BTR011………………………………………………………..…1 Basic operation………………………………………………….....…..1 1. Overview…………………………………………………...…...………1 2. The steps of operation………………….…………………….…………2 3. Paired with Bluetooth device……………………………………...……2 1) How to enter paired mode…………………………………………...….2 2) Pairing with Bluetooth phone……………………………………….….
PAGE 2
Welcome to use this Bluetooth audio receiver BTR011. Please read this user’s manual carefully before use. Brief introduction 1. Bluetooth wireless communication technology Bluetooth is a standard of close range wireless communication technology that was drawn up by Ericsson, IBM, Intel, Nokia and Toshiba in May, 1998. With Bluetooth technology, we can achieve the highest transmission rate among cell phones, computers, printers, PDAs and other devices.
PAGE 3
1 2 3 4 USB charging jack Power pin Status indicator light 3.5mm audio line-out jack 2. The steps of operation The receiver will turned on automatically when plug it into standard AC socket, and it will enter pairing mode Paired with Bluetooth phone or Bluetooth transmitter Connected receiver and external audio device through 3.5 to 3.5mm audio line It can transfer music from phone or transmitter to external audio device 3.
PAGE 4
If prompted by your cell phone to connect, select “Yes” (this will vary among cell phone models). After successful connecting, blue LED will flash twice every 4 seconds. Remarks: The receiver can remember 8 paired devices. When the number of devices exceeds 8, the first one will be replaced. If the phone and receiver over range, the receiver will disconnect and enter standby mode. It will connect automatically if phone and receiver back to available range in 5 minutes.
PAGE 5
Remarks: Please use standard USB cable which compatible with your device The USB port can only provide DC5V-1A, please make sure the charging voltage of your device is DC5V and the max charging current no higher than 1A 5.
PAGE 6
FAQs 1. Why the receiver can not paired with phone? Please make sure the receiver is in pairing mode. The pairing mode will last 2 minutes, it will enter standby mode automatically if overtime. Disconnect the receiver and socket, and reconnect them, after the receiver turned on, it will enter pairing mode automatically. 2.
PAGE 7
_ Reorient or relocate the receiving antenna. _ Increase the separation between the equipment and receiver. _ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. _ Consult the dealer or an experienced radio/TV technician for help. Notes: This device complies with Part 15 of the FCC Rules.