User's Manual

ManualsBrandsZhongshan K-mate General Electronics ManualsElectronicsBluetooth Receiver

BTR006

Bluetooth stereo receiver

User’s manual

 Before use…………………………………………………………1

1. About BTR006…………………………………………………….1

2. System requirements………………………………………………1

3. Overview of BTR006……………………………………………...1

 Getting started……………………………………………………2

1. Charging the receiver……………………………………………....2

2. Turning on/off the receiver………………………………………...2

3. Pairing with Bluetooth devices………………………………….…3

4. Music playback…………………………………………………….5

5. LED indicator……………………………………………………...5

 Care and maintenance……………………………………………6

 FAQs……………………………………………………………….6

 Specifications……………………………………………………...7

Summary of content (8 pages)

PAGE 1
BTR006 Bluetooth stereo receiver User’s manual 1. 2. 3. Before use…………………………………………………………1 About BTR006…………………………………………………….1 System requirements………………………………………………1 Overview of BTR006……………………………………………...1 1. 2. 3. 4. 5. Getting started……………………………………………………2 Charging the receiver……………………………………………....2 Turning on/off the receiver………………………………………...2 Pairing with Bluetooth devices………………………………….…3 Music playback…………………………………………………….5 LED indicator……………………………………………………...
PAGE 2
Welcome to use this Bluetooth stereo receiver BTR006. Please read this user’s manual carefully before use. Before use 1. About BTR006 BTR006 is a stereo Bluetooth receiver. You can use an common audio device with 3.5mm audio in jack for playing back any stereo Bluetooth-enabled device’s music after plugging in BTR006. The product comes with a built-in rechargeable battery, it can be usded for about 12 hours after being charged fully. 2. System requirements Audio device with 3.
PAGE 3
Getting started 1. Charging the receiver BTR006 comes with a built-in rechargeable battery, prior to using it, it is recommended to charge the battery fully for the first time. When the receiver is low power, red LED flashes once and the receiver emits three tones every 20 seconds. Please recharge the battery of the receiver. Connect the charger to a standard power outlet and the charger plug to the charging jack of the receiver. Red LED is on while charging. It takes about 2.
PAGE 4
3. Pairing with Bluetooth devices How to enter pairing mode Function Operation LED indicator LED flashes red and blue alternately Enter pairing mode Indication tone Two “DU” tones Ensure the receiver is turned off, otherwise turn it off first and then press and hold MFB button for 6～7 seconds until LED flashes red and blue alternately Remark: The pairing mode will last 2 minutes, the receiver BTR006 will switch to standby mode automatically if no devices can be connected within 2 minutes.
PAGE 5
Every time the receiver is turned on, it will automatically connect to last connected device. If you want to pair it with other devices, please turn off the Bluetooth function of last connected devices first and pair the receiver with the new device according to steps 1～6 mentioned above. When the reveiver is turned on and doesn’t connect to any devices, press MFB button twice, it will automatically connect to the last connected device.
PAGE 6
4. Music playback Connect BTR006 to an speaker and a Bluetooth music device at the same time, now you can enjoy music wirelessly. Function Pause Status of BTR006 Playing music Play Pausing Operation Short press MFB button once Short press MFB button once Remarks: The music will automatically pause when you dial a phone number or there is an incoming call. BTR006 hasn’t a microphone, so you need to switch the call to the mobile phone. The music will automatically play when the call is ended. 5.
PAGE 7
Care and maintenance Read the following recommendations before using the receiver. Following these you will be able to enjoy the product for many years. Do not expose the receiver to liquid, moisture or humidity to avoid the product’s internal circuit being affected. Don’t use abrasive cleaning solvents to clean the receiver. Do not expose the receiver to extremely high or low temperature as this will shorten the life of electronic devices, destroy the battery or distort certain plastic parts.
PAGE 8
Specifications Bluetooth version Bluetooth profiles Bluetooth frequency range Operating distance Charging input voltage/current Standby time Working time Dimensions Weight Bluetooth V2.1 A2DP and AVRCP 2.402GHz-2.480GHz 10 meters, Class II DC 5V 300mA 230 hours Up to 12 hours 45×33×8mm 14g Notes: 1. This device complies with Part 15 of the FCC Rules.