User Manual

ManualsBrandsZhongshan K-mate General Electronics ManualsElectronicsBluetooth Audio Receiver

BTC021

Bluetooth hands-free car kit

User’s manual

 Brief introduction………………………………………………….…..1

1. Bluetooth wireless communication technology……………………....…1

2. About BTC021...…………………………………………….............…..1

 Before use……………………………………………………………….2

1. Overview…………………………………………………….………..…2

2. Setting up hands-free kit………………………….……………….......…3

 Getting started………….…………………………………………..…..4

1. Turning on/off BTC021…..…….…………….…………….…………..4

2. Pairing BTC021 with a Bluetooth cell phone..…………......………..…4

3. Music playback………………………………………..…………..……5

4. Making a call with BTC021..……..….……………………………..…...5

5. Re-connecting with a Bluetooth device…………………………..……...6

6. Factory reset…………………………………………………...……..…..7

7. USB charging…………….……..…………………………..……….. ….7

8. LED Indicator……………………………………………………..….…8

 Care and maintenance………………………………….………..…..…8

 FAQs……………………………………………………………….....….8

 Specifications……………………………………………..…..............…9

Summary of content (10 pages)

PAGE 1
BTC021 Bluetooth hands-free car kit User’s manual 1. 2. 1. 2. 1. 2. 3. 4. 5. 6. 7. 8. Brief introduction………………………………………………….…..1 Bluetooth wireless communication technology……………………....…1 About BTC021...…………………………………………….............…..1 Before use……………………………………………………………….2 Overview…………………………………………………….………..…2 Setting up hands-free kit………………………….……………….......…3 Getting started………….…………………………………………..…..4 Turning on/off BTC021…..…….…………….…………….…………..4 Pairing BTC021 with a Bluetooth cell phone..
PAGE 2
Welcome to use this Bluetooth hands-free car kit, BTC021. Please read this user’s manual carefully before use. Brief introduction 1. Bluetooth wireless communication technology Bluetooth is a standard of close range wireless technology that was drawn up by Ericsson, IBM, Intel, Nokia and Toshiba. With Bluetooth technology, we can achieve the highest transmission rate among mobile phones, computers, printers, PDAs and other devices.
PAGE 3
Before use 1.
PAGE 4
2.
PAGE 5
Getting started 1. Turning on/off BTC021 Function Operation Power on Power off Enter pairing mode LED indicator Plug cigarette adaptor into car cigarette lighter Blue LED on 1 second Pull cigarette adaptor out of car cigarette lighter or turn off cigarette lighter Indicator light off In standby mode, not connect with device, press and hold MFB button for 4～5 seconds Red and blue LEDs flash alternately Remark: Pairing mode will last 2 minutes.
PAGE 6
Remarks: If pairing is failed, please turn off BTC021 first and then try re-pairing according to the step 1-6 mentioned above. After successful pairing, BTC021 and the Bluetooth cell phone will remember each other, BTC021 will not need to re-pair with the Bluetooth cell phone next time unless the pairing information is deleted because of a new pairing. Every time BTC021 is turned on, it will connect to last connected devices automatically.
PAGE 7
Cancel mute Call transfer (BTC021 to cell phone) Call transfer (cell phone to BTC021) Redial last number Voice dial During a call (Microphone mute) During a call During a call Standby mode, connected to a device Standby mode, connected to a device Short press MFB button twice Long press MFB button for two seconds Long press MFB button for about two seconds Short press MFB button twice Long press MFB button for about 2 seconds Two raise tone One short tone One short tone One short tone One short tone Rem
PAGE 8
Remarks: BTC021 only tries to connect to the last connected device. Please activate Bluetooth on your Bluetooth device before trying to connect. On some Bluetooth devices, take some Nokia cell phones for example, you need to set up “allow automatic connecting” on the phone. 6. Factory reset and button for 6 seconds Under the status of turn on, press simultaneously, and release it until hear two “dudu” tones and see red and blue LED on simultaneously.
PAGE 9
8. LED Indicator LED indicator Red and blue LED flashes alternately Blue LED flashes twice every 3 seconds Blue LED flashes twice every 8 seconds Blue LED flashes quickly Blue LED flashes twice every 8 seconds Blue LED flashes once every 5 seconds Status of BTC021 Pairing mode Standby mode(not connected to a device) Connected to a device Calling/incoming call During a call Microphone mute Care and maintenance Read the following recommendations before using BTC021.
PAGE 10
2. How to do if my cell phone can not search and find BTC021? If BTC021 is not in paring mode, your cell phone can’t find it. Please make sure BTC021 is in pairing mode and in the effective working range. 3. How to do if the voice is not clear? a) Ensure your cell phone is in strong-signal areas; b) Ensure BTC021 is in the effective working range. 4.