User's Manual

ManualsBrandsZhongshan K-mate General Electronics ManualsElectronicsBluetooth hands-free kit

BTC010

Bluetooth hands-free kit

User’s manual

 Brief introduction………………………………………………..1

1. Bluetooth wireless communication technology………………..…1

2. About BTC010...……………………………………………...…..1

 Before use……………………………………………………..….2

1. Overview…………………………………………………….……2

2. Charging the battery of BTC010………………………….………2

 Getting started………….………………………………………..3

1. Switching on/off BTC010…..…….………….…………….……..3

2. Pairing BTC010 with a Bluetooth mobile phone..………....…..…4

3. Installation………………………………………..………….……4

4. Phone book…………………………………………………..……5

a) Prestoring phone number on to BTC010………………..….….5

b) Transferring phone number through Bluetooth………..……....5

c) Clearing pairing list……………………………………………6

5. Making a call with BTC010..……..….…………………………...6

6. Re-connecting with a Bluetooth device…………………………...7

7. Automatic switching off…………………………………………..8

8. LED Indicator …………….……..…………………………… ….8

9. Indication tone………………………………………………….…8

 Care and maintenance………………………………….……..…9

 FAQs……………………………………………………….…..….9

 Specifications……………………………………………..…...…10

Summary of content (11 pages)

PAGE 1
BTC010 Bluetooth hands-free kit User’s manual 1. 2. 1. 2. 1. 2. 3. 4. 5. 6. 7. 8. 9. Brief introduction………………………………………………..1 Bluetooth wireless communication technology………………..…1 About BTC010...……………………………………………...…..1 Before use……………………………………………………..….2 Overview…………………………………………………….……2 Charging the battery of BTC010………………………….………2 Getting started………….………………………………………..3 Switching on/off BTC010…..…….………….…………….……..3 Pairing BTC010 with a Bluetooth mobile phone..………....…..
PAGE 2
Welcome to use this Bluetooth hands-free kit, BTC010. Please read this user’s manual carefully before use. Brief introduction 1. Bluetooth wireless communication technology Bluetooth is a standard of close range radio-communication technology that was drawn up by Ericsson, IBM, Intel, Nokia and Toshiba. With Bluetooth technology, we can achieve the highest transmission rate among mobile phones, computers, printers, PDAs and other devices.
PAGE 3
Before use 1. Overview 1 2 Store phone number and dial prestored phone number Power on/Power off/pair/end a call/reject a call/cancel calling ① 6 7 Store phone number and dial prestored phone number Answer a call/microphone mute/call transfer/redial last call ② 3 Volume down 8 External microphone jack 4 Volume up 9 Charging jack 5 Built-in microphone 10 External microphone 2.
PAGE 4
When the hands-free kit is on and the battery becomes low, the red LED flashes 4 times every 30 seconds and the hands-free kit emits three “DU” tones every 30 seconds. Please recharge the battery fully as described above. Remarks: 1) The battery will dry up if you don’t use BTC010 for a long time. If this happens, you have to charge BTC010 for about 30 minutes before the LED indicator will be on. 2) Please don’t attempt to take out the battery from BTC010, as this might damage it.
PAGE 5
2. Pairing BTC010 with a Bluetooth mobile phone Please make sure your mobile phone is Bluetooth-enabled. Specific pairing steps may vary with different models of mobile phones. Please refer to your mobile phone’s user’s manual for further information.
PAGE 6
b) In-car usage First place BTC010 on the cup slot and fix it well. And then align the microphone towards the user’s mouth and adjust the angle of loudspeaker. At last, make sure there are no barriers between user and BTC010 to get the best conversation quality. 4.
PAGE 7
transfer by Bluetooth. At last, select “BTC010” from the Bluetooth device list. 3) After successful transferring, blue LEDs of , VOL+, VOL-, buttons will flash twice every 7 seconds. At this time, you can short press or button to dial phone number transferred to or button. ① ② ① ② ①, ② ① ② c) Clearing pairing list and When BTC010 connected with your mobile phone, press and hold buttons simultaneously until hearing indication tone, the phone number stored into and are deleted.
PAGE 8
Function Call transfer from mobile phone to BTC010 Redial last number Voice dial Status of BTC010 Operation Press and hold button for 2 seconds, and release it when hearing indication tone During a call Standby mode and connected to a device Standby mode and connected to a device Short press button twice continuously Short press once button Remarks: Not all mobile phones support all functions listed above. Please refer to your mobile phone’s user’s manual for further information.
PAGE 9
7. Automatic switching off BTC010 will switch off automatically in order to save power, if it can’t connected to any device after 10 minutes. 8.
PAGE 10
Care and maintenance Read the following recommendations before using BTC010. Following these you will be able to enjoy our product for many years. Keep the product dry and don’t put it in the damp place to avoid the product’s internal circuit being affected. Keep the product away from direct sunlight or hot places. High temperature will shorten the life of electronic devices, destroy the battery or distort certain plastic parts.
PAGE 11
4. How far is the effective range between BTC010 and Bluetooth mobile phone? According to the Bluetooth standard, the max. controllable range of Class II handsfree kit is 10 meters. But it varies with different environment and paired mobile phone. Specifications Bluetooth specification Bluetooth profiles Bluetooth frequency range Operating distance Working time Standby time Charging input Charging time Working temperature Storage temperature: Dimensions Weight Bluetooth V2.1+EDR HSP and HFP 2.402GHz 2.