User's Manual

ManualsBrandsZhongshan K-mate General Electronics ManualsElectronicsFM Transmitter

AT009

FM Transmitter

User’s manual

Contents

1. Overview……………………………..……………2

2. Getting started……………………………………2

3. Basic operation…………………………………..3

4. Care and maintenance…………………………..3

5. FAQs…………………………..……………...…….4

6. Technical parameter……………………………..4

Summary of content (5 pages)

PAGE 1
AT009 FM Transmitter User’s manual Contents 1. Overview……………………………..……………2 2. Getting started……………………………………2 3. Basic operation…………………………………..3 4. Care and maintenance…………………………..3 5. FAQs…………………………..……………...…….4 6. Technical parameter……………………………..
PAGE 2
1. Overview ① ② ③ ON/OFF switch Multi-function button (MFB) 3.5mm cable ④ ⑤ Battery cover LED frequency indicator 2. Getting started 1) 2) 3) 4) Install two 1.5V AAA batteries into the FM transmitter; Insert 3.
PAGE 3
FM transmitter FM radio 3. Basic operation Operation Turn ON/OFF switch to ON Turn ON/OFF switch to OFF Short press MFB button Press and hold MFB button Function Turn on the FM transmitter Turn off the FM transmitter Select the decimal of the transmitting frequency: Short press MFB button once, the frequency will switch among 0.1MHz, 0.3 MHz, 0.5 MHz, 0.7 MHz and 0.
PAGE 4
Don’t let the transmitter fall down onto the floor. The internal circuit might get damaged. Don’t attempt to disassemble the transmitter as it may get damaged if you are not professional. In case the transmitter doesn’t function properly, send it to the store you bought it. The staff will help you to solve the problem. 5. FAQs 1. What to do when I can’t turn on the FM transmitter? a) Please make sure you have already installed batteries into the FM transmitter; b) Replace batteries with new one. 2.
PAGE 5
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.