User Manual

19 key fan light remote

control manual

Lights on/off All off

Night lights

Directions for use:

1. Remote control code: Press the "SETUP" key within 5

seconds of turning on the light until the light flashes or the

buzzer prompts, indicating that the code is successful.

2. Remote control clear code: Turn on the light for 5

seconds to press the total key until the light flashes or the

buzzer prompts, indicating that the code clearing is

successful.

Product parameters

Input voltage:DC:3V

Standby current: 3~10uA

Controllable distance inside: 20m~60m

RF band: 2.4GHZ- -2.483GHZ

Press a short toggle

the color temperature

Brightness +

Color temperature +

Color temperature-

Brightness-

2 hours timing

Pair code

Wind speed

setting & fan on

Fan off

Forward/Reverse

Natural wind

PAGE 1
9 key fan light remote control manual Lights on/off Press a short toggle the color temperature Brightness + Color temperaturePair code Forward/Reverse Wind speed setting & fan on All off Night lights Color temperature + Brightness2 hours timing Natural wind Fan off Directions for use: 1. Remote control code: Press the "SETUP" key within 5 seconds of turning on the light until the light flashes or the buzzer prompts, indicating that the code is successful. 2.
PAGE 2
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.