Installation Instructions

Install the test driver first

Run the setup.exe file, the next step,,, until the installation is complete. Device manager, under

the network adapter will see the 8188 network card information

as follows:

At the same time, the following icons appear on the desktop

Double-click the desktop icon and the following interface appears.

Select test TX/RX

PAGE 1
Install the test driver first Run the setup.exe file, the next step,,, until the installation is complete. Device manager, under the network adapter will see the 8188 network card information as follows: At the same time, the following icons appear on the desktop Double-click the desktop icon and the following interface appears.
PAGE 2
Select test channel Select test mode 1 – 14 802.
PAGE 3
Number of packages issued Click to start the test HT20/HT40 The POWER value is debugged here, the larger the value, the larger the POWER.