PSBV600BT 2.
Contents Important Safety Instructions.......................................................................................2 Safety..............................................................................................................................................................................2 Warning.........................................................................................................................................................................3 Identifying the Parts...
Important Safety Instructions 8 Do not install near any heat sources such as radiators, heaters, stoves, or other apparatus (including amplifiers) that produce heat. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. 9. Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with one wider than the other.
Caution: - - - curtains etc. Make sure there is at least 20 cm of space above and at least 5cm of space on each side of the unit. • Do not place this unit close to strong magnetic fields. Use of controls or adjustments or performance of procedures other than those described herein, may result in hazardous radiation exposure or other unsafe operation. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Identifying the Parts Main Unit Top view Front view Back view 1 6 Status LED Indicators • Switch the unit between ON and STANDBY mode. • Standby indicator lights up red when the unit is in STANDBY mode. 2 SOURCE • Select the play function. 3 • Aux/Bluetooth/Optical/Mp3 Link indicator lights up when which function is active. BF/PAIR • Play/pause/resume playback in Bluetooth mode.
Remote Control 1 • Switch the unit between ON and STANDBY mode. 2 SOURCE • Select the play function. 3 VOL+/VOL• Increase/Decrease the volume level. 4 H/G • Skip to previous track/skip to next track in Bluetooth mode. 5 BF • Play/pause/resume playback in Bluetooth mode. 6 PAIR • Activate the pairing function in Bluetooth mode and disconnect the existing paired Bluetooth device. 7 MUTE • Mute or resume the sound. 8 EQ • Select a preset sound effect.
Replace the Remote Control Battery 1 Pull out the battery tray and remove the old battery. 2 Place a new CR2025 battery into the battery tray with correct polarity (+/-) as indicated. 3 Insert the battery tray back into the slot. Precautions Concerning Batteries • When the Remote Control is not to be used for a long time (more than a month), remove the battery from the Remote Control to prevent it from leaking.
Connections Use the OPTICAL Connection - Remove the protective cap of the OPTICAL socket, then connect an OPTICAL cable (not included) to the TV’s OPTICAL OUT socket and the OPTICAL socket on the unit. OPTICAL cable TV Tip: If there is no sound come out of the soundbar and the indicator flash quickly. Make sure the audio setting of your source player (e.g. DVD player, game player, TV) is setted to PCM with OPTICAL input.
Use the MP3 Link Connection Connect 3.5mm to 3.5mm audio cable (included) to the MP3 LINK socket on the unit and the audio output socket on external audio device (e.g.MP3 player, iPhone...). - 3.5mm to 3.5mm audio cable Phone/MP3 Player Connect Power - Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit. - This unit is designed to operate with the provided mains cable.
General Operation Standby/ON When you first connect the unit to the mains socket, the unit will be in standby mode and the Standby Indicator will be red. • Press the button to switch the main unit ON. • Press the button again to switch the unit back to STANDBY mode. The POWER indicator will light up red. • Disconnect the mains plug from the mains socket if you want to switch the unit OFF completely. - If the unit is idle for over 15 minutes, the unit will automatically switch to Standby mode.
BLUETOOTH Operation You can listen to tracks from a media device if it is connected to the unit via Bluetooth. Pair Bluetooth-enabled Devices Note: • The operational range between the main unit and a Bluetooth device is approximately 8 meters. • Before you connect a Bluetooth device to this unit, familiarize yourself with the Bluetooth capabilities of the device. • Compatibility with all Bluetooth devices is not guaranteed.
Listen to Music from Bluetooth Device • If the connected Bluetooth device supports Advanced Audio Distribution Profile (A2DP), you can listen to the music stored on the device through the player. • If the device also supports Audio Video Remote Control Profile (AVRCP), you can use the player’s remote control to play music stored on the device. 1. Pair your device with the player. 2. Play music via your device (if it supports A2DP). 3. Use supplied remote control to control play (if it supports AVRCP).
I can't find the Bluetooth name of this unit on my Bluetooth device for Bluetooth pairing • Ensure that the unit is switch on. • Ensure that the Bluetooth function is activated on your Bluetooth device. • The unit has a Bluetooth function that can receive a signal within 8 metres. Keep a distance within 8 metres between. Specifications General Power requirements........................................................................................................................
Contents Important Safety Instructions.......................................................................................2 Safety..............................................................................................................................................................................2 Warning.........................................................................................................................................................................3 Identifying the Parts...
Important Safety Instructions 8 Do not install near any heat sources such as radiators, heaters, stoves, or other apparatus (including amplifiers) that produce heat. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. 9. Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with one wider than the other.
Caution: - - - Use of controls or adjustments or performance of procedures other than those described herein, may result in hazardous radiation exposure or other unsafe operation. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus must not be exposed to dripping or splashing and objects filled with liquids, such as vases, must not be placed on apparatus.
Identifying the Parts Main Unit Top view Front view Back view 1 6 Status LED Indicators • Switch the unit between ON and STANDBY mode. • Standby indicator lights up red when the unit is in STANDBY mode. 2 SOURCE • Select the play function. 3 • Aux/Bluetooth/Optical/Mp3 Link indicator lights up when which function is active. BF/PAIR • Play/pause/resume playback in Bluetooth mode.
Remote Control 1 • Switch the unit between ON and STANDBY mode. 2 SOURCE • Select the play function. 3 VOL+/VOL• Increase/Decrease the volume level. 4 H/G • Skip to previous track/skip to next track in Bluetooth mode. 5 BF • Play/pause/resume playback in Bluetooth mode. 6 PAIR • Activate the pairing function in Bluetooth mode and disconnect the existing paired Bluetooth device. 7 MUTE • Mute or resume the sound. 8 EQ • Select a preset sound effect.
Replace the Remote Control Battery 1 Pull out the battery tray and remove the old battery. 2 Place a new CR2025 battery into the battery tray with correct polarity (+/-) as indicated. 3 Insert the battery tray back into the slot. Precautions Concerning Batteries • When the Remote Control is not to be used for a long time (more than a month), remove the battery from the Remote Control to prevent it from leaking.
Connections Use the OPTICAL Connection - Remove the protective cap of the OPTICAL socket, then connect an OPTICAL cable (not included) to the TV’s OPTICAL OUT socket and the OPTICAL socket on the unit. OPTICAL cable TV Tip: If there is no sound come out of the soundbar and the indicator flash quickly. Make sure the audio setting of your source player (e.g. DVD player, game player, TV) is setted to PCM with OPTICAL input.
Use the MP3 Link Connection Connect 3.5mm to 3.5mm audio cable (included) to the MP3 LINK socket on the unit and the audio output socket on external audio device (e.g.MP3 player, iPhone...). - 3.5mm to 3.5mm audio cable Phone/MP3 Player Connect Power - Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit. - This unit is designed to operate with the provided mains cable.
General Operation Standby/ON When you first connect the unit to the mains socket, the unit will be in standby mode and the Standby Indicator will be red. • Press the button to switch the main unit ON. • Press the button again to switch the unit back to STANDBY mode. The POWER indicator will light up red. • Disconnect the mains plug from the mains socket if you want to switch the unit OFF completely. - If the unit is idle for over 15 minutes, the unit will automatically switch to Standby mode.
BLUETOOTH Operation You can listen to tracks from a media device if it is connected to the unit via Bluetooth. Pair Bluetooth-enabled Devices Note: • The operational range between the main unit and a Bluetooth device is approximately 8 meters. • Before you connect a Bluetooth device to this unit, familiarize yourself with the Bluetooth capabilities of the device. • Compatibility with all Bluetooth devices is not guaranteed.
Listen to Music from Bluetooth Device • If the connected Bluetooth device supports Advanced Audio Distribution Profile (A2DP), you can listen to the music stored on the device through the player. • If the device also supports Audio Video Remote Control Profile (AVRCP), you can use the player’s remote control to play music stored on the device. 1. Pair your device with the player. 2. Play music via your device (if it supports A2DP). 3. Use supplied remote control to control play (if it supports AVRCP).
I can't find the Bluetooth name of this unit on my Bluetooth device for Bluetooth pairing • Ensure that the unit is switch on. • Ensure that the Bluetooth function is activated on your Bluetooth device. • The unit has a Bluetooth function that can receive a signal within 8 metres. Keep a distance within 8 metres between. Specifications General Power requirements........................................................................................................................
