$) 4PVOECBS XJUI 8JSFMFTT 4VCXPPGFS .PEFM )4 USER MANUAL Before using the sound bar, please read this manual thoroughly and retain it for future reference.
Contents Important Safety Instructions 3 Safety ...........................................................................................................................................................................................3 Warning.......................................................................................................................................................................................4 What’s in the Box 6 Identifying the Parts 7 Main Unit ......................
Important Safety Instructions third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. C AUTION RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ÉLECTRIQUE NE PAS PUVRIR 11 Only use attachments/accessories specified by the manufacturer.
Caution: - Use of controls or adjustments or performance of procedures other than those described herein, may result in hazardous radiation exposure or other unsafe operation. - To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus must not be exposed to dripping or splashing and objects filled with liquids, such as vases, must not be placed on apparatus.
FR Réglement de la FCC (pour les clients américains) EN Avertissement : - Pour rester en conformité avec les consignes d’exposition aux RF, placez le produit à au moins 20 cm des personnes proches. - Les changements ou modifications de cet appareil non expressément approuvées par la partie responsable de la conformité pourraient annuler l’autorisation de l’utilisateur à utiliser l’équipement.
What’s in the Box Main Unit AC Power Cord x2 Bracket(x2) / Wall Plug(x2) / screw(x2) / bracket screw(x2) • Remote Control / AAA Batteries x 2 Optical Cable User Manual/Quick Start Guide/ Wall Mount Guide Design and specifications are subject to change without notice.
Identifying the Parts Main Unit ARC 1 2 3 1 Remote Control Sensor Receive signal from the remote control. 2 Display Window Show the current status. 3 Screws Remove the screws then install the wall mounting screws into the back of the unit. 4 (ON/OFF) Button Switch the unit between ON and Standby mode. 5 +/- (Vol+/Vol-) Buttons Increase/decrease the volume level. 6 (SOURCE) Button Select the play function. 7 AC~ Socket Connect to the power supply. 8 LINE IN Socket Connect to an external audio device.
Remote Control 1 2 (MUTE) 3 SOURCE 4 (BT) 5 VOL+/VOL6 / 7 /PAIR 8 9 10 11 EQ SURR DIMMER+/BASS 12 TREBLE Switch the unit between ON and STANDBY mode. Mute or resume the sound. Select the play function. Select the Bluetooth mode. Increase/decrease the volume level. Skip to previous/next track in BT/USB mode. Play/pause/resume playback in BT/USB mode. Press and hold to activate the pairing function in Bluetooth mode or disconnect the existing paired Bluetooth device. Select a preset sound effect.
Placement and Mounting Placement A If your TV is placed on a table, you can place the unit on the table directly in front of the TV stand, centered with the TV screen. B If your TV is attached to a wall, you can mount the unit on the wall directly below the TV screen. A B Wall Mounting (if using option-B) Note: - - Installation must be carried out by qualified personnel only.
Connections Connect to HDMI (ARC) Socket Your Soundbar supports HDMI with Audio Return Channel (ARC). If your TV is HDMI ARC compliant, you can hear the TV audio through your Soundbar by using a single HDMI cable. .*3/ '8) - .*3/ '8) 1 Using a High Speed HDMI cable (not included), connect the HDMI OUT (ARC)-TO TV connector on your Soundbar to the HDMI ARC connector on the TV. The HDMI ARC connector on the TV might be labeled differently. For details, see the TV user manual.
Connect to LINE IN Socket A Use a RCA to 3.5mm audio cable (not included) to connect the TV’s audio output sockets to the LINE IN socket on the unit. 2/4+ /4 B Use a 3.5mm to 3.5mm audio cable (not included) to connect the TV’s or external audio device headphone socket to the LINE IN socket on the unit. A B .KGJVNUTK Connect Power Risk of product damage! - - Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit.
• 2 Then press on the unit or remote control to switch the unit ON. 3 The Pair indicator on the subwoofer will become solid when successful. Please turn the unit off completely to save energy when not in use. Select Modes 4 If the Pair indicator still keeps blinking, repeat step 1-3. (SOURCE) button repeatedly on Press the the unit or the SOURCE buttons on the remote control to select the LINE IN , OPTICAL, COAXIAL, HDMI ARC, USB and BT (Bluetooth) mode. The selected mode will show on the display.
2 Activate your Bluetooth device and select the search mode. “Hisense HS218” will appear on your Bluetooth device list. LINE IN / OPTICAL / COAXIAL / HDMI ARC Operation - 1 Ensure that the unit is connected to the TV or audio device. 2 Press the button repeatedly on the unit or the SOURCE button on the remote control to select the LINE, OPTICAL, COAXIAL, HDMI ARC mode. 3 Select “Hisense HS218” in the pairing list.
• USB Operation • • 1 Insert the USB device. Insert the battery with its polarities (+/-) aligned as indicated. Replace the battery. Aim the remote control directly at the sensor on the front of the unit. No sound 2 Press the button repeatedly on the unit or press the SOURCE button on the remote control to select USB mode. 3 During playback: - To pause or resume play, press the button on the remote control. - To skip to the previous/next file, press the / buttons on the remote control.
Specifications Model Name HS218 Soundbar Power Supply AC100-240V~ 50/60Hz Power Consumption 30W Standby Power USB port for playback USB Compatibility USB Playback support / file formats Dimension (WxHxD) < 0.5 W 5V 0.5A Hi-Speed USB (2.0) / FAT32 32G (max) , MP3/WAV/WMA 37.8 x 2.3 x 3.2 inches / (960 x 58 x 82 mm) Net weight 4.4 lbs / (2.0 kg) Audio input sensitivity 500mV Frequency Response 120Hz - 20KHz Wireless Specification Bluetooth Version V 4.
HS218