User Manual of CL02
Clock Radio CL02 USER MANUAL
Contents Important Safety Instructions...................................................................................2 Safety................................................................................................................................................................................ 2 Identifying the Parts..................................................................................................5 Connections.......................................................................
Important Safety Instructions This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance.
Caution: - Use of controls or adjustments or performance of procedures other than those described herein, may result in hazardous radiation exposure or other unsafe operation. - To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus must not be exposed to dripping or splashing and objects filled with liquids, such as vases, must not be placed on apparatus.
FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. - “Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Identifying the Parts Front View 1 Buttons • Turn on or turn off the unit. • Select a source. • CLOCK View the current radio frequency. Press and hold to set the time. View the time. • MEM / SLEEP Press and hold to preset stations manually. Set the sleep timer. • NAP/DIMMER Set the NAP timer. In Standby mode, adjust brightness level. 2 DOCK iPod/iPhone Docking 3 Buttons • BF/PAIR Play/pause/resume playback. Press and hold to preset stations automaticly.
Connections Connect to an external device - Use a 3.5mm to 3.5mm audio cable (included) to connect the external audio device headphone socket to the LINE IN socket on the unit. Phone/Media player Set up the FM aerial - Unwind the coiled FM aerial at the back of the docking station. IMPORTANT: You may need to adjust the position of the FM aerial when tuning the radio to receive the strongest signal. Never leave the aerial where it can be pulled by young children. Connect Power 1.
General Operation Turn ON/OFF When you first connect the unit to the mains socket, the unit will be in STANDBY mode. • Press the button to turn on. • Press the button again to turn off. - Disconnect the mains plug from the mains socket if you want to switch the unit off completely. - If there is no signal under the DOCK/LINE IN /Bluetooth modes, the unit will automatically switch off with in 15 minutes. Select Modes Press the button repeatedly to select LINE IN or FM or Bluetooth or DOCK mode.
• Activate and Deactivate the Alarm Timer Press VOL-/AL1 or VOL+/AL2 repeatedly to activate or deactivate the timer. • Stop Alarm Ring When the alarm rings, press the button. The alarm stops but the alarm settings remain. Note: - For the SNOOZE function, when the alarm is activated, you could press any key except the ALARM or ON/OFF key to repeat the alarm. Set the sleep timer This unit can switch to standby automatically after a set period of time.
Bluetooth Operation You can listen to music from a Bluetooth-enabled device via this player. Pair Bluetooth-enabled Devices The first time you connect your Bluetooth device to this player, you need to pair your device to this player. Note: - The operational range between this player and a Bluetooth device is approximately 8 meters. - Before you connect a Bluetooth device to this unit, familiarize yourself with the Bluetooth capabilities of the device.
Listening to the FM Radio Auto Scan and Save Preset Station - Ensure that you have connected and fully extended the FM aerial. 1 Press the button to switch FM mode. 2 Press and hold the BF button for few seconds to activate automatic programming. All available stations are programmed in the order of waveband reception strength. - The first programed radio station is played automatically.
Clock/timer setting erased - Power has been interrupted or the power cord has been disconnected. Reset the clock/timer. I can not find the Bluetooth name of this unit on my Bluetooth device - Ensure the Bluetooth function is activated on your Bluetooth device. Re-pair the unit with your Bluetooth device. Specifications Output Power............................................................................................................................................................
广东省中山市港口镇沙港东路群乐工业区 QunLe Industrial Area, East Shagang Road GangKou, ZhongShan, GuangDong, China Tel:+86-760-89923666 Fax:+86-760-89923669 http://www.richsound.
User Manual of CR02 & 8037280
8037280 Allegro Bluetooth® Clock Radio Owner’s Manual
Contents Important Safety Instructions.............................................................................................. 3 Safety................................................................................................................................................................... 3 Caution................................................................................................................................................................ 3 Warning............................
Important Safety Instructions to avoid injury from tip-over. 13 Unplug the apparatus during lightning storms or when unused for long periods of time. 14 Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Identifying the Parts Main Unit Top View: 1. Buttons • Turn ON or turn OFF the unit. • Select a source. • MEM/SLEEP Press and hold to preset stations manually. Set the sleep timer. • CLOCK View the current source. Press and hold to set the time. • NAP Set the NAP timer. 2. SNOOZE/DIMMER Repeat the alarm. Adjust brightness level. 3. Buttons • In Bluetooth® mode, activate the pairing function and disconnect the existing paired Bluetooth® device. In FM mode, press and hold to preset stations automatically.
Connections Connect to an external device - Use the supplied 3.5mm to 3.5mm audio cable to connect the external audio device headphone plug to the LINE IN jack on the unit. Set up the FM aerial Phone/Media player - Unwind the coiled FM aerial at the back of the unit. IMPORTANT: You may need to adjust the position of the FM aerial when tuning the radio to receive the strongest signal. Connect Power 1. Plug in the detachable AC power cord into the DC IN jack at the back of the unit. 2.
General Operation ON/OFF When you first connect the unit to the main jack, the unit will be in Standby mode. • Press the button to turn ON. Press again to turn OFF. - Disconnect the main plug from the main jack if you want to switch the unit OFF completely. - If there is no signal under the LINE IN and Bluetooth® mode, the unit will automatically switch OFF within 15 minutes. Select Modes Press the button repeatedly to switch between LINE IN, FM, and BT (Bluetooth®) mode. "LINE" or "bt " or "87.
• Repeat Alarm When the alarm rings, press the SNOOZE/DIMMER button. "SN The alarm will ring again 9 minutes later. • Stop Alarm Ring When the alarm rings, press the 9" shows in the display. button. The alarm stops but the alarm settings remain. Set the NAP Timer - Press the NAP button repeatedly to select time (in minutes): 05 → 10 → 15 → 20 → 30 → 45 → 60 → 90 → close up - The system is now set to buzzer after the number of minutes selected.
- To pause/resume play, press the button. - To skip to a track, press the /TU-,TU+/ buttons. Tips: - Enter “0000” for the password if necessary. - If a connection exists, press and hold the button to re-activate the Pairing mode, the connection will be interrupted. The display will show “PAIr”. - If no other Bluetooth® device pairs with this player within 2 minutes, the player will recover its previous connection. - The player will also be disconnected when your device is moved beyond the operational range.
Tuning in a Station - Press the /TU- or TU+/ buttons repeatedly until you find the station you want. - Press and hold the /TU- or TU+/ buttons, the frequency changes down or up automatically until a station is found. Note: The unit will switch between the Stereo or MONO channel to receive the FM radio mode automatically, to receive the best signal. “ST” will show on the display if the Stereo channel is selected. Troubleshooting To keep the warranty valid, never try to repair the system yourself.
Standard Accessories Instruction Manual........................................................................................................................................... x 1 Adapter.................................................................................................................................................................. x1 3.5mm to 3.5mm audio cable ......................................................................................................................
THE SOURCE – WARRANTY The Source warrants that this product will be free from defects in materials and workmanship for a period of twelve (12) months from the date of purchase. Within this period, simply take the product and your proof of purchase to any The Source store or participating dealer and the product will be replaced (where available) without charge. Any product which has been subject to misuse or accidental damage is excluded from this warranty.