Use and Care Guide

3 421 5
1. Battery Activation or Installation
back of the scale as shown
and install the batteries according to the
polarity mark
in the battery case.
Note:
After installing the batter
, please close the
battery cover.
Please
the batter
(more than
3 months) .
2. Weight Unit Conversion
The unit conversion button is at the bottom of
scale.
ess
and it be displayed on LED .
Note:
There are KG and LB units on the scale, no
ST: LB unit;
There are ST: LB unit in the App. When
App is converted to ST: LB unit, the scale is
not synchronized with the App.
UNIT BUTTON
Smart Body Scale
Bonded device
4. Store data on cloud - not recommended
Tips:
Ensure that the personal information is true and
correct, so that we better provide more comprehensive
scientific guidance.
As the APP is constantly upgrading, if there is any
difference, please refer to the actual display prevails in
the APP.
The display is lighted up
Step gently to
turn on the scale
5. Start Measurement
1. Place the scale on a hard, flat surface (not a carpet
or mat) with the “MovingLife” app open on your phone.
Note: Placing on carpet may cause inaccurate
measurements or tipping.
2. Gently step on the scale, then the scale will be
automatically turned on.
Standevenly on the scale without moving and wait
until your weight shown on displayis stable and locked.
3. Stand on the scale until the display digits flash 3
times, showing your final measurement.
Your results will show in the App, only shows
your weight and BMI.
Place the scale
on a hard, flat
surface
Gently step on the
scale, then the scale
will be automatically
turned on.
Show your
results in
the App.
Advise for Use & Care
Warning Indications
About the Bathroom Scale
bathroom
Bluetooth Personal Scale
IB-1 Series
7 86
E-MAIL: [e-mail]
App: MovingLife
3. Download and Set up the Application
Go to the “App Store” or “ Google Play”, and search
“MovingLife” to download the Application.
Or scan the QR code below with your phone.
Mo vingLife
Weight Scale Setup
plastic
pull tab
Start
Visitor
1. Tap “Start” then the app will guide you through the
setup process, save the data when you are done.
2. Add the Weight Scale device
3. Allow “MovingLife” to use Bluetooth when prompted.
Make sure Bluetooth is turned on.
4. Tap “IB-A3” in this example to add the weight scale
5. Allow “MovingLife” to access your Apple Health on iOS
phone. Select allow to write Weight data. Be sure to use
the same email address that connected with your Virgin
Pulse account.
6. For Android phone user, you may have to go to “Me” on
the bottom right conner of the app, tap “Setting” on top,
then enable Google Fit. Be sure to use the same email
address that connected with your Virgin Pulse account.
7. After taking a measurement with the “MovingLife” app
open on your phone, the data will show in your Virgin
Pulse account a few minutes later. Making sure your
Virgin Pulse account is connected to Apple Health or
Google Fit.
8. Congratulations! Setup is complete.
Note: In case you missed setup sharing data with Apple
Health, Google Fit, or Fitbit.
Open the “MovingLife” app, tap “Me” at the bottom of
the screen, tap “Settings”, then enable share data with
Apple Health or Google Fit. It can share data with Fitbit
App too.
2) Android
1) iOS
When the digits “0.0 lb” are shown on the display,
the scale is ready for use.
are
are
41 F to 95 F
Open the App and turn on the Bluetooth in your phone,
sign up your account and follow the guidelines to set up
your profile and connection step by step. The scale has
to be on when start to connect with it.
All measurements you take can be saved in history by
getting access to your own account.
If you do not receive an authenticode in the email,
please check your Spam or Junk folder. Please allow
to write data to Apple health or Google fit when
prompted. Also, allow MovingLife to use Bluetooth.
VP-SC001
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV
technician for help.
Changes or modifications not expressly approved by
the party responsible for compliance could void the
user's authority to operate the equipment.
Weight
Add Device
Smart Body Scale
measure your body data
Connect
1. Install batteries for the scale or fully charged
2. Gently step on the scale to turn on
3. Make sure your phone is close to the scale
IB-A3
Mac:187A93A66239
Settings
Language
Theme
Unit
Apple Health
Fitbit
kg, cm
kg, cm
Settings
Language
Theme
Change Password
Unit
Fitbit
Google Fit