HITACHI AllPlay Adaptor User’s Guide
HITACHI Allplay Adaptor User`s Guide Contents IMPORTANT SAFETY INSTRUCTIONS ......................................... 2 Product Layout ......................................................................... 4 LED Indicators ........................................................................... 5 Hitachi Wi‐Fi Speaker App......................................................... 5 ※Preparation ........................................................................... 6 Wi‐Fi input setup .............
HITACHI Allplay Adaptor User`s Guide IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
HITACHI Allplay Adaptor User`s Guide 15) Apparatus should not be exposed to dripping or splashing, and objects filled with liquids, such as vases, should not be placed on the apparatus. 16) Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock. 17) Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short out parts that could result in fire or electric shock.
HITACHI Allplay Adaptor User`s Guide Product Layout 1 2 3 4 1, 2, 3, 4, 5, 6, 5 6 LED: Indicates Wi‐Fi and BT source selected. WPS button: Press to enter Wi‐Fi setup mode (Access Point Mode); Press for 2s to enter WPS mode. SOURCE button: Press to select the input source.(Wi‐Fi/BT) AUX: AUX output jack (3.5mm). DC IN: Power supply input. RESET hole: reset the AllPlay Adaptor to factory default setting.
HITACHI Allplay Adaptor User`s Guide LED Indicators The table below explains the behavior and status of your speaker’s LED indicators.
HITACHI Allplay Adaptor User`s Guide ※Preparation: Before you use your AllPlay Adaptor to playing music, connect speakers with 3.5mm line through the AUX hole. Wi‐Fi input setup You can stream music to your speaker from a mobile device on your Wi‐Fi network by using the “Hitachi Wi‐Fi Speaker” app. To use this feature, the speaker must join the same network as the mobile device. Chose a network setup option from below: 1) Using a mobile device for setup.
HITACHI Allplay Adaptor User`s Guide page will be displayed. If the setup page is not displayed, type “http://172.19.42.1/” into the URL address field. 5. Enter a device name of your choice (e.g., Bedroom) and then select “Next”. Note: The device name will be displayed as this speaker’s name on the network. 6. Select your “Network Name” (SSID) and type the router’s Wi‐Fi pass‐ word. Note: Check your wireless router for the network name (SSID) and the password.
HITACHI Allplay Adaptor User`s Guide another network or if you wish to re‐setup the Allplay Adaptor, press and hold the “WPS” button on the Allplay Adaptor for 2 seconds, enabling Wi‐Fi setup mode (AP Mode). 2. Press and hold the “WPS” button on the Adaptor for 2 seconds. Note: The Wi‐Fi LED will quickly blink RED. Press and hold the WPS button on the wireless router for 2 seconds. Note: When the connection is established, the Wi‐Fi LED on the speaker will turn a solid WHITE color.
HITACHI Allplay Adaptor User`s Guide 3. Select a music source or music service. 5. Select a song, channels, play list, etc. Note: You can listen to synchronized sound from multiple Hitachi Wi‐Fi speakers (additional speakers sold separately.) Music playback may continue to play, when using “Music Services” in the “Hitachi Wi‐Fi Speaker” app, if you do not press pause before exiting the app. 2.
HITACHI Allplay Adaptor User`s Guide Note: When speakers are not grouped together, you can play different songs on other Hitachi Smart Wi‐Fi speakers at the same time. You will need to select individual speakers separately to choose the song, channels, play list, etc. that will be played by the speaker. Up to 10 Hitachi Smart Wi‐Fi speakers can be managed from a single mobile device. 3. Online music services This speaker is compatible with several third party music services.
HITACHI Allplay Adaptor User`s Guide 4. Using Spotify 1. Start the “Hitachi Wi‐Fi Speaker” app, and select Spotify from Music Services. Note: You will need Spotify Premium. For details, visit the following website. www.spotify.com/connect/ : Registration/subscription is required. : Fees may apply. : Service icons, and specifications subject to change. : For details, visit the individual music service’s website.
HITACHI Allplay Adaptor User`s Guide subscriptions to access some or all of their offered services; the Spotify free app can be used via the Hitachi mart Wi‐Fi Speaker’s Bluetooth or AUX IN inputs, but a Spotify Premium subscription is required to use Spotify over your Wi‐Fi network. For any other audio sources that are not supported by Wi‐Fi applications, connect to the Hitachi Smart Wi‐Fi Speaker using its Bluetooth inputs.
HITACHI Allplay Adaptor User`s Guide Bluetooth Setup You can also listen to music from a compatible Bluetooth device by using the Bluetooth input. Preparation: Turn on the Bluetooth function of the Bluetooth enabled device. 1. Press the SOURCE button on the Adaptor to switch to the Bluetooth input. 2. When the Bluetooth LED blinks BLUE, the Adaptor is ready to pair with the Bluetooth enabled device. Note: If the Bluetooth LED is a solid BLUE color, then another device is already paired with the Adaptor.
HITACHI Allplay Adaptor User`s Guide Firmware updates Occasionally Hitachi may release firmware updates for this speaker that may add features or improve functionality. Note: During the firmware upgrade no other operations can be performed. The firmware update process may require approximately up to 5 minutes completing. : During the firmware update, do not disconnect the AC power supply. Doing so may cause malfunction or damage to the speaker.
HITACHI Allplay Adaptor User`s Guide 2, After you select your speaker, continue to “Settings” and then press the “ ” button. 3, Scroll down to the “Firmware” section and select “Check for updates now”. The app will then check for updates and if there is an update available for your speaker, follow the instructions provided by the app to update.
HITACHI Allplay Adaptor User`s Guide Adaptor IP & MAC address Retrieve the IP and MAC address of your speaker. 1. Start the “Hitachi Wi‐Fi Speaker” app. 2. From the “Select a Player” screen, select your speaker. 3. After you select your speaker, continue to “Settings” and then press the “ ” button.
HITACHI Allplay Adaptor User`s Guide 4, Scroll down to the “Network” section and the IP and MAC addresses will be displayed under IP/MAC address.
HITACHI Allplay Adaptor User`s Guide Troubleshooting Before requesting service, make the following checks. If the problem remains unresolved, consult your dealer for instructions. Humming noise is heard during playback. • There are cords/cable from other appliances or fluorescent light near the speaker’s AC power supply cord. Turn these appliances off or move them away from the speaker’s AC power supply cord. Distorted sound when using the AUX IN input.
HITACHI Allplay Adaptor User`s Guide network as this speaker. • Reconnect your mobile device to the network. • Restart or reset your wireless router. Audio is interrupted or playback does not start. • When using the 2.4 GHz band on the wireless router, simultaneous use of other 2.4 GHz devices (cordless telephones, microwaves, etc.) may result in connection interference. Increase the distance between the speaker and these devices. • Try using the 5GHz band, if supported by your router.
HITACHI Allplay Adaptor User`s Guide Specifications (Specifications subject to change without notice) General Input source Wi‐Fi/BT 3.5mm AUX DC IN YES YES Modulation Type CCK, DQPSK, DBPSK, 64QAM, Operating temperature 32°F ~ 104°F (0°C ~ 40°C) Operating humidity 40~90% RH Dimension (Φ x H)(mm) 94”x24.7” Weight (g) 143 6QAM, QPSK, BPSK Supported Audio Formats iOS Controller .aac / .mp3 / .alac / .wav / .m4a (aac+) Android Controller .aac / .mp3 / .alac / .wav / .m4a (aac+) / .
FCC RF Exposure Information and Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with part 15 of the FCC rules.