BTD622 Docking system for iPod/iPhone/iPad
Some Dos And Don't On The Safe Use Of Equipment This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. *********************************** DO read the operating instructions before you attempt to use the equipment.
To achieve the utmost in enjoyment and performance, please read this manual carefully before attempting to operate the unit in order to became familiar with its features, and assure you years of faithful, trouble free performance and listening pleasure. Important Notes * Keep instructions: the safety and operating instructions should be retained for future reference.
DANGEROUS VOLTAGE There is high voltage, that may be of sufficient magnitude to constitute a risk of electric shock to persons is present within this product enclosure. ATTENTION The owner manual contains important operating and maintenance instructions, for your safety, it is necessary to refer to the manual. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO DRIPPING OR SPLASHING. Note: - This unit will become warm when used for a long period of time.
Battery Safety Guidelines PLEASE PHOTOCOPY AND DISPLAY Used correctly, domestic batteries are a safe and dependable source of portable power. Problems can occur if they are misused or abused — resulting in leakage or, in extreme cases, fire or explosion. Here are some simple guidelines to safe battery use designed to eliminate any such problems. BATTERY SAFETY Take care to fit your batteries correctly, observing the plus and minus marks on the battery and appliance.
Table of Contents Some Dos And Don't On The Safe Use Of Equipment ......................................................................1 Important Notes ..................................................................................................................................2 Battery Safety Guidelines ...................................................................................................................4 Product Overview ..................................................................
Product Overview The Unit Front View Top View SRC Rear View 1. IR sensor - Point the remote control at the IR sensor. 2. Display panel - Show the current status. 3. D / SET TIME - Search within an audio file. - Set the clock and date. 4. VOL +/− I / J - Adjust volume. - Scroll up/down. 5. C/ PROG - Search within an audio file. - Program radio stations. 6. Dock 2 - Load an iPod /iPhone/iPad . 7. Dock 1 - Load an ipod/Iphone. 8. TUNE + / I / TUNE − / J - Tune to a radio station. - Scroll up/down. 9.
Product Overview Remote Control Overview 1. 2. - 3. Bluetooth ( ) / PAIRING - Select the Bluetooth source. - Press and hold Cleard the Bluetooth pairing history. 4. FM / DOCK - Select the TUNER source. - Select Dock 1 or Dock 2 source. 5. DISPLAY/SET TIME - Display current information. FM mode: - Display RDS information USB mode: - Display ID3 information - Set the clock and date. 6. S-BASS - Turn on or off super bass enhancement. 7. P-EQ - Select a preset equalizer setting. 8. AL 1 - Set the alarm timer.
Before use Connect to an external device Connect power AUDIO IN You can also listen to an external audio device through this unit. 1. Connect the audio cable to: · AUDIO IN jack · External device AUDIO OUT jack Connect a USB storage device After you made all necessary connections, insert the AC power plug into a wall outlet, and your unit ready to use. Caution: 1. Be sure to unplug the mains plug from the mains socket when going out or when the unit is not in use for an extened period of time.
Get started Turn on * Press STANDBY, the unit switches to the last selected source. * * Switch to standby mode Press STANDBY to switch the unit to standby mode, the clock (if set) appears on the display panel. Do not use any batteries other than those specified. Do not heat or disassemble batteries. Never throw them in fire or water. Do not carry or store batteries with other metallic objects. The batteries could short circuit, leak or explose.
Play Play from USB Play from iPod/iPhone/iPad You can play MP3/WMA files copied on the USB storage device. 1. Select a USB storage device, press USB button. 2. Insert the USB storage device, the play starts automatically. You can enjoy audio from iPod/iPhone/iPad through this unit. To select a specified file for play: 1. Press ALBUMI/J button to select a folder, and then press OK button to confirm. ● To pause or resume play, press BF button. ● To skip to the previous/next file, press H / G button.
Play Play from an external device Listen to the iPod/iPhone/iPad 1. Press DOCK button to select dock source. 2. Place the iPod/iPhone/iPad into the dock. You can also listen to an external audio device through this unit. 1. Press AUDIO IN button to select the source, is displayed. 2. Connect the cable to: · AUDIO IN jack · the AUDIO OUT jack on an external device 3. Start to play the device (see the device user manual). ● To pause/resure play, press BF. ● To skip to a track, press / .
Play with Bluetooth device With this unit, you can listen to audio files from a player if bluetooth connection is available. Pairing bluetooth-enabled devices To connect your Bluetooth device to the unit, you need to pair the device to the unit. Pairing needs only to be done once. Note: * The operational range between this unit and a Bluetooth device is approximately 10 meters. * Before you connect a Bluetooth device to this unit, familiarize yourself with the Bluetooth capablities of the device.
Listen to radio Note: * Only FM radio reception is available on this unit. Tune to a radio station Note: * Position the antenna as far as possible from TV, VCR or other radiation source. * For optimal reception, fully extend and adjust the position of the antenna. 1. Press FM ( or SOURCE on the top panel) to select FM tuner. 2.
● If no time signal is received, [NO CT] is displayed. Note: * The accuracy of the transmitted time depends on the RDS station that transmits the time signal. Other features Set the alarm timer Snooze alarm You can set two alarms which go off at different time. When alarm sounds, press SNOOZE, the alarm snoozes and repeats ringing 9 minutes later. 1. Press and hold ALARM 1 or ALARM 2 button.The hour digits begin to blink, [ALM SET], [ 1] or [ 2] flashes on the screen. 2.
Adjust sound Adjust volume level Select a preset sound effect During play, press VOL+/- button to increase/ decrease the volume level. During play, press P-EQ button repeatedly to select: Mute sound · [POP] · [JAZZ] · [ROCK] · [JAZZ] · [CLASSIC] · [FLAT] During play, press MUTE button to mute/unmute sound. Note: You can also press the SET TIME button on the top panel repeately to select.
Troubleshooting If you are having a problem with your system, check this list for a possible solution before calling for service. If you cannot solve the problem from the list below, or the system has been physically damaged, call a qualified person, or your dealer, for service. No power ・ Ensure that the AC power plug of the unit is connected properly. ・ Ensure that there is powr at the AC outlet. No sound ・ Adjust the volume.
Product information General information AC power ............................................................................................................... 100-240V ~ 50/60Hz 3.5A Output...............................................................................................................................................7.5V Frequency Response ....................................................................................................100Hz ~ 20KHz Siignal to Noise Ratio..................
The mark is in compliance with the Waste Electrical and Electronic Equipment Directive 2002/96/ EC (WEEE). The mark indicates the requirement NOT to dispose the equipment including any spent or discarded batteries as unsorted municipal waste, but use the return and collection systems available. If the batteries or accumulators included with this equipment, display the chemical symbol Hg, Cd, or Pb, then it means that the battery has a heavy metal content of more than 0.0005% Mercury, or more than 0.
