The following features are available in this PDF document. Quick Keyword Search Enter the keyword in the search box and hit the search button Quick Jump between Chapters Click the title of a specific chapter on the Contents to jump to it *Reading software such as Adobe Reader is needed to support the functions above.
ZHIYUN-EN-v1.
Contents ■■ Packing List Packing List·····················································································1 ■■ Get to Know WEEBILL-S Get to Know WEEBILL-S··································································2 ■■ Preparing and Charging the Batteries Charger and Batteries Description····················································3 Charging Procedure·········································································4 ■■ Installation and Balance Adjustment Tripod Installa
Overview of the Main Functions························································18 ■■ Calibration and Firmware Upgrade When do you need to calibrate the stabilizer?···································19 Initialization Method··········································································19 Six-side Calibration··········································································20 Motor Fine-tuning············································································22 Stabilizer Fi
Packing List Packing List The product package comes with the following items. In case any item is found missing, please contact ZHIYUN or your local selling agent.
Get to Know WEEBILL-S Get to Know WEEBILL-S 1. Tilt Axis Motor 14. Tripod 2. Tilt Axis Lock Switch 15. Tripod Lock Switch 3. Camera Control Interface 16. Follow Focus Control Interface 4. Quick Release Plate Latch 17. Lens Support 5. Safety Lock 18. Quick Release Lock Screw 6. Roll Axis Latch 19. Lens Support Lock Screw 7. Roll Axis Motor 20. Quick Release Plate Unleash Button 8. Roll Axis Lock Switch 21. Tilt Axis Lock Screw 9. Focus/Zoom Control Wheel 22. Pan Axis Lock Screw 10.
Preparing and Charging the Batteries When using WEEBILL-S for the first time, please fully charge and activate the batteries with the dedicated charging device contained in the package to ensure normal use of the product. Charger and Batteries Description Charger Specifications Name: 18650*2 Li-ion Battery Charger Model: CH18650-2B Input: 5V 2000mA Output: 4.2V 800mA*2 The LED indicator shines solid red when charging. The LED indicators shines solid blue when fully charged.
Preparing and Charging the Batteries Charging Procedure 1. Insert the batteries into the charger in the right direction (positive/negative end) accordingly. 2. Connect the charger to the adapter via the Type-C USB cable. 3. Plug the adapter into a power outlet to start charging. Power USB Cable Adapter Supply ① Due to the differences of the charger itself, charging the batteries may fail when the power supply is insufficient (for instance, when the current of the adapter is lower than 500mA).
Installation and Balance Adjustment Tripod Installation Get the tripod ready and mount it to the 1/4"-3/8" threaded hole at the bottom of the stabilizer, then unfold the tripod on a flat surface. You can also install the tripod onto the base of the battery compartment to enter Sling Mode. Please make sure to put the tripod lock switch to lock position before entering into Sling Mode.
Installation and Balance Adjustment Battery Installation Slide out the cover of the battery compartment and load two ZHIYUN 18650 lithium batteries (note the positive and negative directions). Camera Installation Each axis of the gimbal is equipped with a lock switch. You can use these lock switches to lock the axes for convenient installation and storage. Lock for installation 安装锁定姿态 Lock for storage 收纳锁定姿态 1.
Installation and Balance Adjustment Camera Control Cable Connection Plug the camera control cable into the control interface of the camera and stabilizer.
Installation and Balance Adjustment • Unlock the tilt axis and Quick Release Plate Latch, push the camera to move forward or backward until the camera can stay still and almost level with its lens facing front (as shown below). Complete this step by tightening up Quick Release Plate Latch. • Make the lens face up, slightly loosen the thumb screw of the tilt axis, and push the camera to move upward or downward until the camera can stay still with the lens facing up (i.e.
How to Use Buttons Description ❶ ❷ ❸ ❼ ❹ ❽ ❺ ❻ ❾ ❿ ⓫ ⓯ ⓮ ⓬ ⓭ ❶ Focus/Zoom Control Wheel* the stabilizer. The Control Wheel controls the TransMount Servo Zoom/Focus Controller as default. Please select the electronic focus on the menu if required. ❾ Video[ ❷ Trigger Button • Press and hold the Trigger Button to enter Following Mode as default, and let go the Trigger Button to switch back to the previous mode. • Double press the Trigger Button to reset the motor position.
How to Use *For the installation method of TransMount Servo Zoom/Focus Controller, please check the Instruction for the controller. ① Please slightly hold the camera when powering on the stabilizer to avoid erratic gimbal rotation which may cause camera damage. ② Please keep the grip stable when turning on the stabilizer. Shakes during the power-on may cause the stabilizer power-on failure.
How to Use Icon Description Camera connected with stabilizer Video Mode Photo Mode The stabilizer is charging the Sony camera. (Select "sony", select "on" on the "camera" menu) Battery Level (stabilizer) axis lock axislock This icon prompts when the axis is locked and the stabilizer will make a beep sound.
How to Use Menu Option Description auto Motor Torque Setting camera Stabilizer params settings Low-torque Medium-torque High-torque Tilt Axis custom Roll Axis Pan Axis close(Close the interface) canon nikon off(Charging is off) sony on(Charging is on) panaso (Panasonic) ccs fuji(FUJIFILM) olympus zcam bmpcc Tilt Axis Control speed of joystick Roll Axis Pan Axis speed Tilt Axis Follow speed of motor Roll Axis Pan Axis Tilt Axis smooth Roll Axis Pan Axis Tilt Axis deadband Roll Axis Pan Axis yes default
How to Use low medium high Set the current wheel position as A point Max Set the current wheel position as B point Clear AB Points AB Point * Set the current wheel wheel (control wheel position as A point setting) Lite Set the current wheel position as B point Clear AB Points M-focus (TransMount Servo Zoom/Focus Controller) function(control wheel functions) E-focus(Electronic Zoom/Focus) off(disable control wheel on the handle) reverse(control the off wheel in reverse on direction) Joystick(in off vertical
How to Use Motor Torque Adjustment The motor torque of the stabilizer shall be adjusted by 3 levels to adapt the specific camera and lens applied for ideal performance. Auto torque adjustment: Under auto torque adjustment, the stabilizer will adjust the motor torque according to the weight of the carried camera and lens. Operation Method:Single press Menu Button and rotate the dial to "motor", then rotate the dial to "auto" and press the right side of the dial to confirm.
How to Use Locking Mode (L): Push down the PF/L mode switch This mode locks the movement of all three axes to keep the camera fixed on a shooting direction. Push the joystick up/ down and left/right allows manual control of the tilt axis and pan axis. Tilt Axis Roll Axis PF L Pan Axis Tilt Axis Roll Axis Point of View Mode (POV): Single press the POV mode button This mode allows all three motors to rotate 360° following the movement of the stabilizer.
How to Use Tilt Axis Follow Mode: Press the Trigger Button at the back The camera pans and tilts following the movement of the stabilizer. Push the joystick left/right to control the rotation of the roll axis. Tilt Axis Go Mode: Press the Fn Button The camera pans left/right and tilts up/ down following the movement of the stabilizer at faster speed while the roll axis is locked.
How to Use Manual Angle Lock Under pan following mode and locking mode, you can manually rotate the camera to a certain angle, then loosen your grip and the camera position will be fixed. Under pan following mode, you can manually adjust the angle of the tilt axis. Under locking mode, you can manually adjust the angle of the pan axis and tilt axis.
APP Operations Download APP Scan the left QR code (Android 5.0 and above, IOS 9.0 and above) or search "ZY Play" directly in the app store to download "ZY Play". ① Paired with the APP “ZY Play” designed for WEEBILL-S, it can provide you better use of various functions. ② The ZHIYUN APP is subject to regular update without notice. How to Connect Stabilizer to Smartphone 1. Power on the stabilizer and connect the stabilizer with your camera with a camera control cable. Turn on your phone Bluetooth. 2.
Calibration and Firmware Upgrade When do you need to calibrate the stabilizer? Please calibrate the stabilizer when necessary. Calibration Reason How to calibrate 1. A slight deviation is found in the tilt angle of the camera in level position after startup. 2. A slight deviation is found in the roll angle of the camera in level position after startup. 3. Frequent small angle correction is found when the camera is in level position while the stabilizer stays still. Initializing the stabilizer 1.
Calibration and Firmware Upgrade Six-side Calibration 1. Six-side calibration via APP: According to the method introduced in "APP Operations", please connect the stabilizer with APP, and enter "Calibration", then conduct the six-side calibration according to the prompt. 2. Six-side calibration via "Zhiyun Gimbal Tools" Power on the stabilizer and turn it to standby mode. Connect the USB port on the stabilizer with a computer via a Type-C USB cable.
Calibration and Firmware Upgrade STEP 3 STEP 4 STEP 5 STEP 6 21
Calibration and Firmware Upgrade Motor Fine-tuning According to the method introduced in "APP Operations", please connect the stabilizer with APP, and enter "Settings" and select "motor calibration", then set the fine-tuning value of the tilt axis and roll axis according to actual needs. Stabilizer Firmware Update USB Method 1 : Connect the USB port on the stabilizer with a computer via a Type-C USB cable to conduct the stabilizer firmware update and online calibration. 1.
Product Specifications Product Model:CR110 Min. Standard Max. Charging Voltage 6.8V - 8.4V Charging Current 250mA - 3000MA Output Voltage (Micro USB port) - 5V - Output Current (Micro USB port) - 1000mA - Tilt Mechanical Range -132° 314° +182° Roll Mechanical Range -67° 314° +247° Pan Mechanical Range - 360° - Operation Temperature -10℃ 25℃ 45℃ Battery Capacity Remark Two 18650 Li-ion Batteries One 2600mAh Battery Runtime - 12h 14h Lab Data 1 Charging Time - 2.
Disclaimer and Warning Thank you for purchasing ZHIYUN WEEBILL-S. The information contains herein affects your safety, legitimate rights and obligation. Please read this instruction carefully to ensure proper configuration before use. Failure to read and follow this instruction and warnings herein may result in serious injury to you or bystanders, or damage to your device or property. Guilin Zhishen Information Technology Co.
Disclaimer and Warning WARNING To avoid fire, serious injury, and property damage, observe the following safety guidelines when using, charging, or storing your batteries. Battery Use 1. Prevent the batteries to come into contact with any kind of liquid. Do not leave batteries out in the rain or near a source of moisture. Do not drop the battery into water.
Disclaimer and Warning 13. Do not place the battery on a conductive surface (such as a metal desk surface, eye-glasses, watch, jewelry, etc.) 14. Prevent use of wires or other metal objects that could cause positive and negative short-circuit to the battery. 15. If the battery terminal is dirty, wipe it with a clean, dry cloth. Otherwise it will cause a bad battery connection, which may result in energy loss or charging failure. Battery Charging 1.
Warranty Terms Warranty Period 1. Customers are entitled to replacement or free repair service in case of quality defect(s) found in the product within 15 days upon receipt of the product. 2. Customers are entitled to free repair service from ZHIYUN for any product proven defective in material or workmanship that results in product failure during normal consumer usage and conditions within the valid warranty period, which is 12 months counting from the date of delivery.
Contact Card Website Weibo Vimeo Google+ Facebook (Zhiyun Support) Facebook (Zhiyun Tech) Youku Youtube Wechat Instagram 28
Contact Card Tel: +86(0)773-3561275 USA Hotline: +1 808-319-6137,9:00-18:00 GMT-7,Mon-Fri Europe Hotline: +49(0)61018132180,10:00-17:00 GMT+1,Mon-Fri Web: www.zhiyun-tech.com E-mail: service@zhiyun-tech.com Address: 09 Huangtong Road, Tieshan Industrial Zone, Qixing District, Guilin, Guangxi, China. CertificateofQuality This product is confirmed to meet quality standards and permitted for sale after strict inspection. QC Inspector: Please download the latest version from www.zhiyun-tech.