User's Manual

正面
反面
1 2 3 4 5 6 7 8 9
User Manual
Mibro Earbuds S1
Thank you for choosing our product, hope the fashionable appearance and
high quality stereo can enrich your life.
Note: Please fully charge it with the charging case before the first use
when you receive the product.
Identifying Key Parts
Charging Pin
Main Microphone
Noise Reduction Microphone
1
3
LED Indicator
Touch Multi-function Button(MFB)
2
5
4
6
Charging Pin
7
Charging Box Battery Indicator
①Slide the charging box upwards,
and the Earbuds will automatically
turn on and into the bluetooth
pairing mode.
② Open the Bluetooth of your phone
system, search the Bluetooth name
"Mibro Earbuds S1", click the device
name and complete the pairing.
③ Take out the earbuds and wear it.
You will hear a "beep" sound,
indicating that both ears are
connected and music can be played.
Charging
Getting Starts
100%
75%
50%
25%
0 %
When charging, the light on the side of the charging case will flicker in a
circle, and the light will stay on constantly after being fully charged.
Charging when the indicator light flashes.
When all four indicators are on, the battery is fully charged.
The earbuds turn off automatically if:
① You put earbuds back to the charging case.
② When earbuds leave the charging case, but
haven’t connect to any devices within 5 minutes.
③ When the earphone battery is low (please charge
it in time).
For above situation, please press and hold theMFB
for 8 seconds to Power ON.
功能使用
Getting Off
Functions
You can operate MFB to get certain functions as below:
1.Power On/Off
In the on/off state, long press for 8 seconds to switch off/on.
2.Play / Pause
When playing music, double-click MFB(R or L) to pause , double-click
again to resume.
3.Previous Track /Next Track
When playing music, Quick triple hit MFB(L) to previous track,
Quick triple hit MFB(R) to next track.
4.Volume Increase Or Decrease
When playing music, Click MFB(L) once to decrease the volume,
Click MFB(R) once to increase the volume.
5.Start voice assistant
In the Bluetooth connection state, Quick triple hit MFB(L or R) to activate the
voice assistant.
Hearing Safety
Safety Rules
6.Answer/End a call
When there’s an incoming call,Click MFB once to answer ,you can end it by
double-click MFB again.
7.Reject An Incoming Call
When there's an incoming call press and hold the MFB for 3 seconds to reject.
Avoid dripping and dropping.
Use original or certified cables.
Never disassemble or modify your earbuds for any reasons to avoid any
damages and dangers.
Keep the earbuds dry and do not submerge it in water.
Keep out of reach of children, small parts included may be a choking
hazard,and avoid using the LED indicator close to the eyes of children or
animals.
Do not use this earbuds during a thunderstorm to avoid irregular function
and increased risk of the electric shock.
Clean with a dry, soft lint-free cloth, do not use harsh chemicals or strong
detergents to clean.
The product shall not be exposed to excessive hot or wet.
To avoid hearing damage, do not listen for long time
at high volume.
Do not turn the volume so high that you're unable to
hear your surroundings.
Do not use earbuds while driving.
You should use with caution or temporarily
discontinue using in potentially hazardous situations.
Name and content of hazardous substances
Part name
Earbuds
Battery
Earplugs
Charge Box
Hazardous substances
PBDEPBBCr(VI)Pb Hg Cd
This table is prepared in accordance with GB/T 26572.
Indicates that the content of the hazardous substance in all
homogeneous materials of the component is below the limit
specified in GB/T 26572.
It means that the content of the hazardous substance in at least
one homogeneous material of the component exceeds the limit
specified in GB/T 26572.
Performance failure and after sales regulations
Name Performance fault table
1. The earbuds is silent during use.
2. During the call, the other party cannot hear the sound.
3. Unable to charge, the charging indicator is not on.
Earbuds
Non warranty regulations
1. Wear and dirt caused by users' use, such as scratches and color changes; As
well as damage caused by contact with chemical reagents, sharp objects,
falling, extrusion and deformation;
2. Unauthorized maintenance, collision, misuse, negligence, abuse, water
ingress, accidents, and failures caused by the use of non-standard accessories
of the product;
3. Tearing, altering labels, forging anti-counterfeiting marks, etc.
4. Damage caused by force majeure;
5. Non compliance with performance faults listed in the performance fault
table;
If you need after-sales service, please contact Mibro customer service：
Website： www.mibrofit.com
customer service： 400-0908-508
Attention:
The illustrations of products and accessories in the manual are schematic
diagrams for users' reference only. Due to the update and upgrading of this
product, the actual product may be different from the schematic diagram.
Please take the actual product as the standard!
● Mibro brand owns the final right to interpret the goods.
Charging Box X1, Earbuds X2, Charging cable X1, User Manual X1
FAQ
Parking List
Q: The earbuds is silent while another is sound.
A: 1. It may be that both earbuds can not be connected normally. In extreme
cases, this kind of situation will occur. Please put the earbuds back into the
charging box, take it out and reconnect it after 8 seconds of reset;
2. It may be that the silent earbuds is dead. Please put both ebuds back into
the charging box and fully charge them before taking them out for reuse.
Q: The earbuds didn' t responsive when I get them from the charging case,
it can’t turn on automatically.
A: Please check the power of charging case, if there is no power the earbuds
can’t turn on automatically or you can manually turn it on (long touch MFB for
2 seconds).
Q: I have established connection with my smartphonea, but I am not
hearing any sounds?
A: Please make sure that you have turned up the volume of both devices
Smartphone requires you to set up the Bluetooth earbuds as an audio output
devices before transimition of sound. Please check the instruction of your
smartphone for details. If you are using a music player or other Bluetooth
devices, please make sure it supports A2DP stereo music profile.
Q: Why the connection is not stable and cuts out intermittently?
A: Please make sure there are no obstacles between the earbuds and your
Bluetooth device; please make sure there is no radio or WiFi interference
nearby.
Q: The sound is not very clear or the caller cannot hear my voice clearly.
A: Please adjust the volume on your phone and earbuds. Make sure there
is no source of interference nearby. Stay close to your smartphone check if
there's any improvement.
BT Version
BT Range
Input
Output
Charging Time
Battery Type
Weight
5V 150mA
About 4 hours
Lithium ion polymer
About 42g
V5.0
BT Model
Earbuds Basic Parameters:
Charge Box Basic Parameters:
Battery Capacity
35mAh（Per Earbuds）
Charging Time
About 1.5 hours
Play Time
About 5 hours
Stand By
About 60 hours
Input
5V 100mA
Battery Type
Lithium ion polymer
Weight
About 3.8g（Per Earbuds）
Waterproof
IPX5
Battery Capacity
600mAh
5V 500mA
Basic Parameters
≤10m/33ft
XPEJ003
Manufacturer:
Zhenshi Information Technology (Shanghai) Co., Ltd.
Address:
Room 4015, Building 2, No. 588, Zixing Road, Minhang District, Shanghai
用户手册
Mibro Earbuds S1
感谢您购买本产品，使用前请仔细阅读并严格遵循使用说明和注意事项并妥善保
管,以备查阅。
温馨提示：当您收到本产品后，请在首次使用前先充电。
产品图解
耳机充电接触点
通话麦克风
降噪麦克风
1 2
耳机指示灯
触摸式多功能按键
3
5
4
6
耳机充电接触针
7
电量指示灯
① 向上滑开充电盒，耳机将自动开机
并进入蓝牙配对模式；
② 打开您的手机系统蓝牙，搜索蓝牙
名称”Mibro Earbuds S1“,点击设备
名并完成配对；
③ 取出两只耳机并佩戴好，会听到“
嘟嘟"声，表明双耳已正常连接，可以
正常播放手机音乐。
产品充电
请于首次使用前将耳机入盒， 连同充电盒连接充电线充满电。
充电盒的指示灯闪烁表示正在充电中；
当四颗指示灯全亮时表示电量已充满。
启动蓝牙
100%
75%
50%
25%
0 %
以下情况之一耳机将自动关机
① 耳机放回充电盒，并合上盖子；
② 从充电盒中取出后5分钟内没有设备连接；
③ 耳机电量低时（请及时充电）
以上情况，请手动长按耳机触摸按键约8秒可开机。
功能使用
关闭蓝牙
功能使用
可使用多功能触摸按键获得以下某种功能：
1、开/关机
开/关机状态下，长按8秒可实现关/开机。
2、播放/暂停
音乐播放状态下，双击暂停播放，再次双击恢复播放。
3、上一曲/下一曲
播放音乐时，快速三击左耳（L）多功能按键可切换至上一曲；
快速三击右耳（R）多功能按键可切换至下一曲。
4、音量加/减
播放音乐时，单击左耳（L）多功能按键音量减小；
单击右耳（R）多功能按键音量增加。
5、启动语音助手
蓝牙连接状态下，快速三击多功能触摸按键（L或R)，启动语音助手。
听力保护
请勿长时间在高音量状态下使用，以防损害听力。
请勿将声音调整过大以防听不到周围声音。
请勿开车时使用。
安全事项
6、接听来电/结束通话
当有来电时，单击(L或R)多功能按键可接听来电，再次双击可挂断本电。
7、拒接来电
当有来电时，长按任一耳机3秒
请勿挤压或者碰撞，避免跌落。
请使用原装或经过认证的充电线。
请勿自行拆卸/修改耳机，以防损坏或危险。
请保持耳机干燥，切勿丢入水中。
远离儿童，以避免有可能伤害儿童的意外情况。
请勿在雷电天气使用耳机以防意外情况。
请使用干软布擦拭，避免使用刺激性化学物货强力洗涤剂清洗。
请勿在严重高温/潮湿/腐蚀性环境下使用本产品。
产品中有害物质的名称及含量
部件名称
耳机主体
电 池
耳 塞
充 电 盒
有害物质
多溴二苯醚
（PBDE）
多溴联苯
（PBB）
六价铬
（Cr(VI)）
铅
（Pb）
汞
（Hg）
镉
（Cd）
本表格依据GB/T 26572的规定编制。
表示该有害物质在该部件所有均质材料中的含量均
在GB/T 26572规定的限量要求一下。
表示该有害物质至少在该部件的某一均质材料中的
含量超出GB/T 26572规定的限量要求。
性能故障及售后条例
名称 性能故障表
1、使用过程中耳机无声；
2、通话过程中，对方听不到声音；
3、无法充电，充电指示灯不亮。
蓝牙耳机
非保修条例
1、因用户使用造成的磨损脏污，如划痕、颜色改变的；以及接触化学试剂、尖锐
物体碰伤、掉落挤压变形等人为损坏的情况；
2、未经授权维修、碰撞、误用、疏忽、滥用、进水、事故，以及使用非本产品标准
配件造成故障的情况；
3、撕毁、涂改标贴、伪造防伪标识等情况。
4、因不可抗力造成的损坏；
5、不符合《性能故障表》所列性能故障的情况；
若有售后服务需求，请联系Mibro客服：
网 址： www.mibrofit.com
客服电话： 400-0908-508
注意：
说明书中的产品、配件等插图均为示意图，仅供用户参考。由于本产品的更新
升级，产品实物与示意图可能会有差异，请以实物为准！
● 商品最终解释权归Mibro品牌所有！
充电盒 x1个、耳机 x2个、充电线 x1条、说明书 x1本
FAQ/疑难解答
包装明细
问：耳机一边有声一边无声。
答：1、可能是双耳无法正常连接， 极端情况下才会出现此类情况，请将耳机放回
充电盒内，8秒复位后取出重新连接使用；
2、可能是无声耳机没电，请将双耳放回充电盒内充满电再取出重新使用。
问：耳机从充电盒取出后未自动开机。
答：请首先检查充电盒电量，若充电盒没电，耳机取出时将无法自动开机。
此时可手动开机（手动触摸多功能按键约8秒）
问：连接着蓝牙设备聆听音乐并浏览网页时，网页音频将同时播放。
答：通常状态都会如此，与手机软件有关，可关闭网页音频即可，无需担心。
问：已经和手机连接但是没有任何声音。
答：首先请确保耳机和手机声音均已开启且未设置在最低音量。智能手机有时
要求先设置蓝牙耳机为音频输出设备，此操作可查询智能手机使用说明。 若使
用音乐播放器或其他蓝牙设备，请确保设备支持A2DP音乐文件。
问：打电话时声音不清晰或对方无法听到我的声音。
答：调大耳机及手机音量，靠近手机并确保周围无强烈干扰信号。
问：为什么蓝牙连接不稳定或间歇性断开。
答：请确保耳机与设备间没有障碍物，请确保周围无强烈WIFI或磁场干扰。
蓝牙版本
传输距离
输入参数
输出参数
充电时间
电池类型
盒子重量
5V 150mA
约4小时
锂离子聚合物
约42g
V5.0
蓝牙名称
耳机基本参数：
充电盒基本参数：
电池容量
35mAh（每只耳机）
充电时间
约1.5小时
通话时间
约5小时
待机时间
约60小时
输入参数
5V 100mA
电池类型
锂离子聚合物
耳机重量
约3.8g（每只耳机）
防水级别
IPX5
电池容量
600mAh
5V 500mA
产品参数
≤10m/33ft
XPEJ003
制造商： 甄十信息科技（上海）有限公司
地 址：上海市闵行区紫星路588号2幢4015室