Mibro Air
Please read this manual carefully before using the product and keep it properly product description Packing list: Smart watch(including strap) X 1, magnetic charging cable X 1, product manual X 1, product important information and warranty card X 1 Product overview Full touch display Heart rate sensor Home button Charging port Buttons and touch Home button Power on: Long press for 3 seconds until the screen lights up Shut down: long press for 3 seconds, select "shut down" Return: Click Decline: Cal
Connect the watch WearFit pro APP QR code (WearFit pro allows the use of mobile application functions) 1. Scan the QR code above, or search for "WearFit pro" in the Android App Store/APP Store, download and install the WearFit pro APP. 2. Press and hold the button for 3 seconds to turn on, open and enter the "WearFit pro" APP, search for the device according to the APP connection wizard, select the device model, and complete the connection and pairing.
Charging Please align the metal contacts of the magnetic charging cable and be close to the charging contacts of the watch. The magnetic charging cable will automatically be attached to the charging contacts of the watch to start charging, and the charging instructions will be displayed on the watch screen. note: 1. Do not charge in a humid environment; 2. Make sure that the metal contacts on the watch body and the magnetic charging cable are not dirty or corroded; 3.
Bluetooth data transmission When connected to a mobile phone, the watch will instantly synchronize some data with the mobile phone via Bluetooth, including weather, notification messages, sports health data, etc. After the connection is disconnected or Bluetooth is turned off, the data will not be synchronized. Precautions 1. The measurement results of this product are for reference only, not for any medical purpose or basis.
Basic parameters Name: Mibro Air Input: 5V Nominal voltage: 3.7V Battery capacity: 200mAh Model: XPAW001 Charging cut-off voltage: 4.2V 1A Max. Size: 42×8.95mm Equipment requirements: Android 4.2 or iOS 8.4 and above If you need after-sales service, please call the service phone: 400-0908-508 Client: Zhenshi Information Technology (Shanghai) Co., Ltd. Address: Room 4015, Building 2, No. 588, Zixing Road, Minhang District, Shanghai Manufacturer: Shenzhen Wake Up Technology Co., Ltd.
FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.