Face Recognition Access Control Terminal Quick Guide V1.
Contents 1 Packing List ············································································································································ 1 2 Product Overview ································································································································· 1 Appearance and Dimension ······································································································· 1 Structure Description ·········································
1 Packing List Contact your local dealer if the package is damaged or incomplete. The package contents may vary with device model. No.
• For IC card • For QR code Structure Description • For IC card 1 2 3 7 4 8 11 9 10 5 6 1.Microphone 2.Camera 3.Illuminator 4.Display screen 5.Card reading area 6.
7.Reboot button 8.Cable interface 9.Network interface 10.Loudspeaker 11.Tamper proof button • For QR code 1 2 3 7 4 8 11 9 10 5 6 1.Microphone 2.Camera 3.Illuminator 4.Display screen 5.Card reading area 6.QR code reading area 7.Reboot button 8.Cable interface 9.Network interface 10.Loudspeaker 11.Tamper proof button 3 Installation Installation Environment Ensure adequate lighting at the site. Avoid intense light.
Wiring Before installation, plan wiring for power cable, network cable, door lock cable, wiegand cable, alarm cable, RS485 cable, etc. The number of cables depends on the actual networking conditions. See the figures below for wiring between the terminal and other devices. NOTE! • Input devices in the diagrams below refer to devices that send signals to the access control terminal. Output devices refer to devices that receive signals from the terminal.
Wiring Schematic Diagrams (with Security Module) +12V GND GND PRESS TO EXIT GND Black ALM_IN Red Power supply Door magnetic sensor Black BUTTON White Alarm input + - Door lock LOCK_COM Purple LOCK_NO Gray SEN Orange + Electric drop bolt lock /Magnetic lock LOCK_NC Yellow - 485_P Blue 485_N Brown VDD12V Red GND Black + RS485 RS485_A Orange RS485_B Yellow Gated Security Module Face Recognition Access Control Terminal Power input Electric strike Door opening button Alarm input devic
Paste the template. • With junction box: Align the two holes (A) on the drill template with the two installation holes on the junction box. See the left figure below. • Without junction box: Paste the drill template on the wall with the arrow perpendicular to the ground. Use a Ø6-6.5mm drill bit to drill three 30 mm-depth holes on the A position (be careful not to damage cables in the wall), then insert expansion bolts. See the right figure below.
Mount the cover. Secure the cover by fastening the three screws using a Phillips screwdriver. Use a T10 star wrench to unscrew the two tamper proof screws that fix the card module on both sides of the terminal. Tamper proof screw Secure the screws with screwdriver. Fasten the access control terminal to the bracket hook. Interference fit allows screw to be loosened but not fall off. Use a T10 star wrench to tighten the two tamper proof screws.
NOTE! • You are required to change the activation password on the terminal screen after powering on the terminal at the first time. You are strongly recommended to set a strong password of at least nine characters including digits, letters and special characters. • You can configure the terminal location, network and password and others on the terminal screen. For detailed operations, see the Visual Intercom Face Recognition Terminal User Manual II.
NOTE! You may need to install a plug-in at your first login. Follow the on-screen instructions to complete the installation. Close all browsers during installation. After the installation is completed, open the browser again to log in to the system. Enter the username and password, and click Login to access the Web page. For detailed operations, see the Visual Intercom Face Recognition Terminal User Manual II.
7 Appendix Face Photo Collection • General requirement: Facing the camera without wearing a hat, cap, etc. • Range requirement: The photo should show both ears and the complete part from the top of the head (including hair) to the bottom of the neck of the person. • Color requirement: True color photo. • Makeup requirement: Heavy makeup is not allowed, including eyebrow makeup and eyelash makeup. • Background requirement: A solid color such as white or blue is acceptable.
Face Expression and Head Pose Facial Expression To ensure face comparison accuracy, keep a natural facial expression during face collection and comparison. Head Pose To ensure face comparison accuracy, keep your face in the center of the recognition window and avoid incorrect poses shown below.
Disclaimer and Safety Warnings Copyright Statement ©2022 Zhejiang Uniview Technologies Co., Ltd. All rights reserved. No part of this manual may be copied, reproduced, translated or distributed in any form or by any means without prior consent in writing from Zhejiang Uniview Technologies Co., Ltd (referred to as Uniview or us hereafter). The product described in this manual may contain proprietary software owned by Uniview and its possible licensors.
To the extent allowed by applicable law, in no event shall Uniview’s total liability to you for all damages for the product described in this manual (other than as may be required by applicable law in cases involving personal injury) exceed the amount of money that you have paid for the product. Network Security Please take all necessary measures to enhance network security for your device.
Ground your device properly if the device is intended to be grounded. Battery Use Caution When battery is used, avoid: Extremely high or low temperature and air pressure during use, storage and transportation. Battery replacement. Use the battery properly. Improper use of the battery such as the following may cause risks of fire, explosion or leakage of flammable liquid or gas.
IC Statements This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: — This device may not cause interference, and — This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence.
Better Security, Better World www.uniview.com globalsupport@uniview.
