Pulse Flex User Manual Features • Conventional fixing and installation. Simple to setup in every room/zone with ease. • High quality JBL® stereo speaker, can be used in Indoor or Outdoor (IP43 approved). • Multi-user, Multi-source, Multi-zone. • Integrated the latest and great music streaming services and internet radio (keep updating). Create your favorite playlist from them quickly and easily. • Individual as well as group control of LED lights and music playing remotely.
Product Specifications • Power Supply: 100~120V, 60Hz • Light Socket: E26 • Power Consumption: 10W (Rated), 13W (LED + Speaker) • Operating Temperature: 0°C ~ +35°C • Store Temperature: -40° C ~ +70° C • Operating Humidity: 10% ≤ RH ≤ 95%, Non condensation • Atmospheric Pressure: 86kPa ~ 106kPa • Color: Silver, Champagne etc. • Dimensions: 6.26”(H) x 3.74” (Dia.)/ 159.0mm (H) x 95.0mm (Dia.) • Weight: 370g (approx.) LED Lights • Power: 4.
• 1.75’’ Full Range High Fidelity JBL® Loudspeaker • Frequency Response: 100Hz – 20kHz (acoustical) • Wireless Connection: Wi-Fi Dual-band, 2.4GHz & 5GHz • System Wireless Point-to-Point Latency < 1ms • Transmission Power: 15dBm§ (max.) § Actual transmission power will vary with network conditions and environmental factors, including radio interference, building materials and construction.
on. Follow the voice prompt from the bulb, and wait for at least one minute to restart Pulse Flex to the Wireless Mode (configurable, ). CAUTION: Never use with external or outside dimmers. 4. Launch the Pulse Flex application. Please entre your Email account and password to log in. If you don’t have an account before, please Sign Up to set up your new account. 5. Pulse App will automatically search nearby Pulse Flex bulbs which have been connected to your Wi-Fi router.
8. Once all Pulse Flex bulbs have been connected to the Wi-Fi router, a main screen Lights (on left tab) and Players (on right tab) will appear. Lights: for LED lights ON/OFF and dimming control individually or by group. Players: Play your favorite music through ‘Local Music’, ‘Local Network Music’ or “Music Services”. Choose your favorite songs from different music sources to play or create your own playlists. . 9. Press and move Pulse Flex up or down to create groups for dimming and music control.
10. If you want to change the settings of individual Pulse Flex bulb or a group, press ‘Device Management’ under the Menu, then select the bulb or the group you want to change. ‘Name’: Name of a Pulse Flex bulb or a Pulse Flex Group. This name is visible on the App. User can press the ‘Edit’ button to change it to a more meaningful name, such as “Bedroom”, etc. ‘Keep Last Brightness’: Record the last brightness value when the light bulb physically turns off.
firmware updates can be found out from in the “About” tab. RESETTING A PULSE FLEX BULB: If the bulb cannot be detected by the App on portable smart devices in any ways, user can press the physical RESET button to reset the configuration of the bulb, as shown below CAUTION: Following procedure resets all settings and deletes all the data on the bulb, please don’t turn Pulse Flex off during the resetting. Select one of two methods to reset the Pulse Flex bulb: I.
IMPORTANT SAFETY INSTRUCTIONS • Read and keep these safety instructions. • Heed all warnings contained within these instructions. • Please follow all user manual instructions when installing the product. • Only clean Sengled product only with a dry towel. • This Product is intended for indoor use only. • Do NOT use this product outdoors. • Do NOT get this product wet and do NOT use near any water source. • The product should not be exposed to dripping or splashing liquids of any kind.
CAUTION • RISK OF ELECTRIC SHOCK - DO NOT OPEN. • SUITABLE FOR WET LOCATIONS. • NOT FOR EMERGENCY LIGHTING. • ENSURE FIXTURE CAN SUPPORT ADDED WEIGHT OF BULB. • DO NOT USE WITH DIMMERS. APP SOFTWARE DIMMING CONTROL. Statement Federal Communications Commission (FCC) Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter.
IC Radiation Exposure Statement for Canada This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
Radiation Exposure Statement: This equipment complies with “Industry Canada RSS-102 for radiation exposure limits set forth for an uncontrolled environment”. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body.
d'élévation condition énoncée doit être clairement indiqué. Devraient également être informés les utilisateurs que les radars à haute puissance sont désignés comme utilisateurs principaux (c. priorité utilisateurs) des bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient provoquer interférences et / ou endommager les appareils LE-LAN.
