Element User manual User Manual Z01-A19NAE26 LED Wireless Bulb Features Control on/off, brightnessremotely and color temperature via mobile app brightness control via double click the switch; Real-time power consumption reporting and instantaneous power reporting iControlOpenHomeTM,Zigbee Alliance certified, Zigbee HA 1.2 compatible Product Specifications Power: 9.
socket (E26). 2. Screw the bulb into the light socket and turn the switch on. The bulb will indicate pairing mode by power on for three minutes . If needed, power cycle the bulb (off then back on) to re-enter the pairing mode after the three minutes. 3. While the bulb is in pairing mode, initiate pairing on your hub . Once paired, the bulb can be controlled via mobile app, or the button on the bulb. Rejoining the bulb and resetting to factory settings 4.
continue without login (as the FIG 3.2.1). 3. If you don’t log in with a account, you can only use element local features. FIG 3.2.1 4. When log in successfully, we can see the main menu (as FIG3.5.1). Click “Devices” to open the devices page and you can add new hub and the new bulbs follow the Interface prompt.(3.3.1) You should add hub first, and then add bulbs to the hub.
FIG3.3.1 5. Add a new hub Devices interface ----- click the top-right “+”icon--click “Add a Hub” and follow the guidance to connect the hub with your router . The setting steps are as below: (1) Insure the hub is power on and connect to your router with an Ethernet cable;(FIG3.4.1) (2) Click the next make sure your phone’s WIFI connect to the same router---click the next (as FIG3.4.2). enter the password of your router.(as FIG3.4.
FIG3.4.1 FIG3.4.3 FIG3.4.2 FIG3.4.
FIG3.4.5 FIG3.4.6 6. Add a new bulbs Devices interface ----- click the top-right “+”icon--click “Add a Bulb” and follow the guidance to connect the bulb to your hub. The setting steps are as below: (1)Select the hub you added before;(FIG3.4.6) (2)Scan the QR code of every bulb which you want to add (as FIG3.4.7). The QR code is on your bulb like the FIG 3.4.8. (3) If you done step2, you will find the QR code on you App just like FIG3.4.
FIG3.4.7 FIG3.4.8 FIG3.4.9 FIG3.4.
7. Operation introduce The functions of Element app as below FIG 3.5.1 showed: ●Main Show yours bulbs . You can control them together with the All page or single control with Individuals page. You can turn on or off your bulbs or change the brightness and color temperature. (FIG3.5.2 and 3.5.3) Showed all your devices including all your hubs and its bulbs. ●Devices You remove manage them in here. You can add your favorite scenes as the way you use all your bulbs.
7.1 Main “Main” is about light control and so on. It will show all of the element light as two way: All or Individuals (such as FIG 3.5.2 and FIG3.5.3). FIG3.5.2 FIG3.5.3 You can control all your bulbs together in the “All” page, including turn on and off the bulbs or change their brightness or color temperature if you want. The button on the top right corner, you can click it to show the performance information of all bulbs daily or weekly or monthly.(FIG3.5.4 and FIG3.5.
FIG3.5.4 FIG3.5.5 You can control your bulbs one by one in the “individuals” page. Click the right arrow and you will see FIG3.5.6. You can control the bulb and rename the bulb here and see its usage data by slide left.
FIG3.5.6 FIG3.5.7 7.2 Devices Devices allow you manage your devices both of hubs and bulbs. Click the setting icon, and you can rename the SSID of hub. You can also delete bulbs here. Add new hub or bulbs will be enable when you click the top right add button. (FIG3.6.1 and FIG 3.6.2).
FIG3.6.1 FIG3.6.2 7.3 Scenes You can add your favorite scenes as the way you use all your bulbs. Then you can quickly make them effect by only click one button. To add a scene, click the cross button on the top right and you will see FIG3.6.4. Need 3 steps to add a scene: First, name it. Second,select bulbs what you want Third, set the brightness and color temperature you like. Then click OK to save it, and now you can make it work only by click the scene.
FIG3.6.3 FIG3.6.4 7.4 Schedule You can add an alarm here to make the scene effect at the special time you wanted. As the Figture 3.6.5,you can turn on or off the schedule to make it work or not. When you want to add a new schedule, you should click the cross button and create a new one by 4 steps: First, select a scene you like. Second, select which day you what it work repeat. Third, name it. Forth, change your local time zone or not, it will be your phone system time zone by default.
FIG3.6.5 FIG3.6.6 7.5 Account You can change your account password or logout in here.(FIG3.7.
FIG3.7.1 7.6 About About show the information about software version and the firmware version of hubs and bulbs. You can also update the firmware here.(FIG3.8.
FIG3.8.
LED + Smart Control Quick Start Guide Internet Login LAN Connect Element hub to any LAN port on the Wi-Fi router via the ethernet cable provided in the package. Then provide power to the hub. sengled element Connect your mobile app to the Wi-Fi provided by the same Wi-Fi router in Step 1. Download and install Element App on your iOS or Android mobile device.
3 4 Turn off the wall switch, twist Element bulb into the socket, then turn on the wall switch to power the bulb. Devices Add a bulb Add a Hub Login LAN Open the Element App and follow the in-App instructions to create an account, add bulbs and configure their settings.
5 Internet Once Element bulbs are successfully connected in the App, the ethernet cable connecting the hub to the router can be removed. The bulbs can now be controlled by the App. Note: Keep the wall switch on to provide constant power to the bulbs.
FCC STATEMENT FOR USERS This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. SECTION 15.
IC Radiation Exposure Statement for Canada This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste,ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur. IMPORTANT NOTE: Radiation Exposure Statement: This equipment complies with “Industry Canada RSS-102 for radiation exposure limits set forth for an uncontrolled environment”.