Snap User manual Parameter AS01-PAR38NAE26 100-120V 50/60Hz 145mA , 14W(rate) 800LM, 3000K ,E26 User operation instructor Ⅰ Software download way Step1 : Log in https://appdownload.cloud.sengled.com:8099/ Step2: Can see the android and ios APP download address. Then knock the download button for set up . ⅡEquipment installation method Tighten the light clockwise on the lamp holder,Then the lamp counterclockwise Until the camera direction at 6 o 'clock.
PIC 3.2.1 3. When log in successfully, PIC 3.2.2 can see the main menu “My Snap”(as PIC3.3.1).You can add new Snap lamps follow the Interface prompt,or press the Shared icon. You also can see others Snap video by Discover icon. PIC3.3.1 4. Add new lamp method My Snap interface ----- click the top-right “+”icon--follow the guidance to connect the lamp with router . Pls note it is some different between Android app with IOS app.
(3) App will search all signal list around your router, please select your router name. Please click this router , need to write your router password. When the password is right , will go into the next menu(as PIC3.4.4and3.4.5).When successfully, you can add other new lamp or go back the mail menu. If failed ,please press the reset button to try again. Note:If the password verification always fail ,but you can sure it’s right, please restart. PIC3.4.1 PIC3.4.3 PIC3.4.2 PIC3.4.
PIC3.4.5 PIC3.4.6 If your equipment is IOS systerm,please refer the follow steps to set up: (1) Enter the “My snap” menuclick the top-right “+” icon refer the picture prompt to know how to operate . (2) When come back the App,it will search all of the wifi list aroud your house. Please select your wifi router. (3) When connectting with your router,input your wifi password,once it be right, App will connect with your router automatically.
●About show the information about software version ,and OTA path. PIC3.5.1 5.1 Camera Click the CAM icon --enter My Snap-it will show all of the CAM list(as PIC 3.5.2).The video player can show lamp Name, light level, lamp on/off, share icon, cloud icon. There is also the quick lamp on/off icon at the top-right(as PIC3.5.3). Click the player picture will see the live video. At this menu, you can control the lamp, e.g. adjust the LED light level for full-in light for the camera(as PIC 3.5.5). PIC3.5.
PIC3.5.5 Click the top-right icon at the live video , you can find below functions(as PIC 3.5.7and 3.5.8) : 1. Night Vision mode . when night , you can adjust the LED light off by App, and open the infate lamp automatically. 2. Record mode . select it , will record video automatically. 3. Discover mode. Use this mode , you can share your video with your family or friends. There is also has the Snapshot function , if you select it , the lamp will recognize smile face or wave action. 4.
PIC3.5.6 PIC3.5.7 PIC3.5.10 PIC3.5.8 PIC3.5.9 PIC3.5.11 PIC3.5.12 Enter Discover menu, you can watch others shared Snap lamp.
video records . Click the star icon , you can collect them , which will be shown at the top bar(as PIC 3.5.13 and 3.5.14). . PIC 3.5.13 PIC 3.5.14 By Snapshot function, you can see the smile face pictures and wave hand pictures those captured by Snap camera. You can open/close this function at Camera setting menu. About Snapshot, you can view big picture after click small picture, or can slide switch different images, even can view full-in-screen(as PIC 3.5.15and PIC 3.5.16). PIC3.5.15 PIC3.5.16 5.
3.5.18). ·keep last Brightness : select it on , means the lamp will remember the light level when it power off. That means when your power on again, the light level must be as the last time. ·Light Time Schedule: you can set the LED work time zone(as PIC3.5.18 and PIC3.5.19) . PIC3.5.17 PIC3.5.18 PIC3.5.19 5.3 Bulb Management The third of sidebar is the bulb management function for that inspect the lamp situation, or change name,or delete from account(as below pictures) . PIC3.5.20 PIC3.5.
5.4 Account The fouth of sidebar is account management function. You can change your account name or password or view push messages or other user feedback, even can logout(as PIC 3.5.22) . PIC3.5.22 5.5 About The fifth of sidebar is the About function. It imainly show App version, firmware version and firmware OTA upgrade reminder. 6. Special Explain When you add a lamp into your account, if you see a lamp icon with exclamation, means it has been used by others .
Statement Federal Communications Commission (FCC) Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter.
IC Radiation Exposure Statement for Canada This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
Le présent émetteur radio (identifier le dispositif par son numéro de certification ou son numéro de modèle s'il fait partie du matériel de catégorie I) a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste,ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur.
priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.