User's Manual

ManualsBrandsZhejiang shenghui lighting Co., Ltd. Shanghai Branch ManualsElectronicssengled element

Table Of Contents

User Manual

Z01-CIA19NAE26 LED Wireless Bulb

Features

• Control on/off and brightnessremotely via iControl devices and mobile app

• On/off and brightness control via button on-bulb

• Automatic color temperature adjustment (2700K@25% brightness ~

3300K@100%brightness)

• Real-time power consumptionreporting

• iControlOpenHome

,Zigbee Alliance certified, Zigbee HA 1.2 compatible

Package Includes:

• One Z01-CIA19 Bulb

• User manual

Product Specifications

• Power: 9.8 Watts

• Brightness: 800 lumens

• Beam Angle: 233 degrees

• Input: 100~120V AC, 50/60Hz, 120mA

• Light Socket: E26

• Operating Temperature: -20° C ~ +52° C

• Store Temperature: -40° C ~ +70° C

• Operating Humidity: 10% ≤ RH ≤ 95%, N o condensing

Summary of content (6 pages)

PAGE 1
User Manual Z01-CIA19NAE26 LED Wireless Bulb Features • Control on/off and brightnessremotely via iControl devices and mobile app • On/off and brightness control via button on-bulb • Automatic color temperature adjustment (2700K@25% brightness ~ 3300K@100%brightness) • Real-time power consumptionreporting • iControlOpenHome TM,Zigbee Alliance certified, Zigbee HA 1.2 compatible Package Includes: • • One Z01-CIA19 Bulb User manual Product Specifications • • • • • • • • Power: 9.
PAGE 2
Installation Instructions 1. Turn the light switch to OFF position prior to installing the LED bulb in a standard socket (E26). 2. Screw the bulb into the light socket and turn the switch on.The bulb will indicate pairing mode by subtle light pulsing for up to three minutes.If needed, power cycle the bulb (off then back on) to re-enter the pairing mode after the three minutes. 3. While the bulb is in pairing mode, initiate pairing on your iControl security controller panel using the instructions provided.
PAGE 3
automatically Important Safety Instructions • • • • • • • • THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY EXITS” or “NOT FOR EMERGENCY LIGHTING” • This product is intended for indoor use only • Recommend not use the bulb in completely enclosed fixtures • Recommend not use with external wall dimmers • Do NOT use the productnear any water source • Recommend not install this bulb in sockets controlled as group (ex: recessed lights, ceiling fan fixtures) • Operate the button on the bulb only when the bu
PAGE 4
FCC STATEMENT FOR USERS This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. SECTION 15.
PAGE 5
IC Radiation Exposure Statement for Canada This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
PAGE 6
Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste,ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur. IMPORTANT NOTE: Radiation Exposure Statement: This equipment complies with “Industry Canada RSS-102 for radiation exposure limits set forth for an uncontrolled environment”.