ZigBee/USB adopter RD1100+
Zhejiang Raying IoT Technology Co., Ltd Copyright The information contained in this document is the proprietary information of Zhejiang Rexense Technology Co., Ltd. (hereinafter referred as Rexense). All rights reserved. Without the written permission of the company may not to the company's employees, agents, partners or licensing party disclose to any third party other than the content of the document, in any form without authorization, copying or dissemination of this document.
CONTENT 1. Overview.................................................................................................................. 3 1.1. Supported oprating system................................................................................ 3 2. Rated parameter..................................................................................................... 3 3. Operating Conditions..............................................................................................4 4. Other data........
1. Overview D1100+ USB adopter has USB2.0 standard interface with power supply through USB. It is easy to be connected to main device(for example, PC, ). With USB serial device driver, the main device can communicate with inner Zigbee module via VCOM, actually works as ZigBee-RS232 adopter. There is inner enhanced Zigbee module in the adopter, which is usually used with PC and for the filed adjustment or presentation. 1.1.1.
3. Operating Conditions Typical values at 5V 25°C. Parameter Current (TX) Range Unit 125 mA 36.0 mA 25 °C Max. Output power -9 to +19.5 dBm RX Sensitivity -98 to -100 dBm Current (RX) Ambient temperature Max RF Data Rate 250 Table 2: Operating Condition Kbps 4. Other data For further technical information, including radio performance, please refer to the Product Manual of REX3SP Module at www.rexense.com.
.1 Windows 9x/XP/2k/7 driver installation Refers to picture above,press “Next” to continue; 5
Refers to picture above,press “Next” to continue; Refers to picture above,select “I accept the terms of the license agreement” to continue; 6
Refers to picture above,press “Next” to continue; Select destination folder for the the driver,press “Next” to continue; 7
Press “Install” to continue; 8
When the picture below comes, the system will note that the installation documents, CP210x_VCP_Win_XP_S2K3_Vista_7, have been copied to the user’s hard disk successfully. Please press Launch the CP210x VCP Driver Installer to finished the installation. Click “Finish”, the dialog box below comes; Click “Install” to complete the installation of driver.
7. Custom Firmware Development There are two ways of custom firmware development available: Through the USB-Serial port, users are able to update IAP upgrade on the base that there is Bootloader program in the ZigBee module. Users can send the firmware to perform the upgrade according to the upgrading commands of the Bootloader program. User can upgrade command according to BootLoader and via sending firmware program.