ZK200MGU User Manual
ZK200MGU User Manual 1. Introduction ZK200MGU is a GPS positioning tracker specially built for scooter based on LTE CatM network technology and RTK positioning technology. Its built-in GPS receiver provides superior sensitivity, centimeter-level positioning accuracy, and extremely fast first positioning time (TTFF) in 35s for both cold and hot start-up.
ZK200MGU User Manual 3.2 LTE Specifications 1 2 3 No. 4 5 Item Parameter Antenna module Frequency 3GPP Conducted power 6 Transformation Module Internal Antenna L710HG GSM850, GSM1900, LTE(B2/B4/ B5/B12/B13/B26) GSM(GPRS&EGPRS)/LTE(Cat-M1&NB-IoT) GSM850: 24.99dBm GSM1900: 28.49dBm LTE B2: 25.00 dBm (Cat-M1) 23.00 dBm (NB-IoT) LTE B4: 25.00 dBm (Cat-M1) 23.50 dBm (NB-IoT) LTE B5: 25.00 dBm (Cat-M1) 23.00 dBm (NB-IoT) LTE B12: 25.00 dBm (Cat-M1) 23.00 dBm (NB-IoT) LTE B13: 24.00 dBm (Cat-M1) 23.
ZK200MGU User Manual 3.6 Other Specifications No Item 1 Parameter Main Control Chip Core: M4 Core Flash: 512K bytes Memory: 192K bytes Frequency: 200Mhz Acceleration Range: ±2/±4/±8/±16g 2 Six-Axis Sensor 3 Speaker 4 Local Electronic Fence 2.0W@8Ω Can support 30 areas with max. 50 points 4. Interface Description 4.1 Connector Interface PIN No.
ZK200MGU User Manual PIN No. Name Description 1 VBUS Red, 5V 2 DM Orange 3 DP Brown 4 GND Grey 5. User Instructions 5.1 Installing SIM Card 1. Turn off ZK200MGU 2. Open ZK200MGU and insert SIM card in the red circle place. 5.2 Installing ZK200MGU to the RTK Connect the 5-pin interface to the RTK, and then it will be powered on and can communicate with the scooter.
ZK200MGU User Manual 5.3 Communicating with Backend Server After installing SIM card and powered on, ZK200MGU can communicate with the backend server through network, and transfer reports of emergency, Geo‐fencing, device status and scheduled GPS position etc. It is easy for service provider to set up their tracking platform based on the functional wireless tracking protocol. 5.4 Debugging Users can use the 4-pin interface to give commands to the device locally for the purpose of testing and debugging. 5.
ZK200MGU User Manual FCC Statement: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,and (2) this device must accept any interference received, including interference that may cause undesired operation.