User's Manual

User Manual
Dear Customer, Thank you for buying NVC Self-Ballast Lamp, Please read carefully the
product instruction before using!
The model of ESX-18W/20W；ESX-23W, Use only on 120 volt, 60Hz circuit. The wattage
marked on the lamp. And the operating Frequency is More than 40KHz and less than
60KHz
Features
Energy Saves up to 75% compared to common incandescent Lamps
Long lamp life, average 9years
High Lumens efficiency;
Rapid on/off with silent operation;
Reduces Carbon Dioxide Electromagnetic Volume
Consumes natural resources
Generate less heat in the building
Note & Attention
Always turn-off power before re-lamping;
Avoid installing lamp by gripping the glass tube;
Do not use with dimmers or electronic timers
Reliable operating temperature -18℃~60℃
Not suitable for damp surroundings or sealed occasions
Risk of electric shock-use in dry locations
For best result use in proper voltage range as mentioned on lamp base
Applications:
Home, Office, Hotel, Shop, Restaurant…and so on lighting
FCC Information
1．This device complies with Part 18 of the FCC Rules.
2．Information on the following matters shall be provided to the user in the
Instruction manual:
(a) The interference potential of the device or system;
(b) Maintenance of the system;
(c) Simple measures that can be taken by the user to correct interference;
(d) Manufacturers of RF lighting devices must provide an advisory statement, either on the
product packaging or with other user documentation, similar to the following: This product
may cause interference to radio equipment and should not be installed near maritime
safety communications equipment or other critical navigation or communication
equipment operating is in between 40KHz and 60KHz. Variations of this language are
permitted provided all the points of the statement are addressed and may be presented in