LSD4BTB-PBS1000001 User Manual Product name: S1 beacon explosion proof version 2 Product model:LSD4BTB-PBS1000001 Version:Rev01 第 1 页 共 9 页
Document revision history Number Modify log Modifier Reviewer Version Date 1 Origin why sxt Rev01 2020-4-22 第 2 页 共 9 页
Catalog CHAPTER 1 SUMMARY .................................................................................................................... 4 1.1 WORKING PRINCIPLE.............................................................................................................................. 4 1.2 WORKING CONDITIONS .......................................................................................................................... 4 CHAPTER 2 INSTRUCTIONS ..............................................
Chapter 1 Summary Chemical plant is a high-risk industrial field. In recent years, safety accidents have caused great losses to employees and enterprises. Therefore, personnel positioning management has become an effective means to reduce potential safety hazards and realize digital and intelligent management in the plant area. Bluetooth RSSI positioning is one of the existing indoor positioning technologies.
Chapter 2 Instructions 2.1 Construction and installation instructions As shown in the figure below, prepare several S1 type beacons according to the indoor space size of the factory, and install them at an interval of 5m according to the serial number. Note that the serial number in the drawing should correspond to the ID number (minor) of the beacon.
2.3 Accessories information There are several accessories for users to fix our product to the ceiling. One is pressure sensitive adhesive, customer can use this to attach Beacon to concrete surface. Another accessory is expansion screw, customer can use electric drill to fix our beacon to the solid wall. Both of the accessories are shown in the pictures below.
Chapter 3 Matters needing attention 3.1 Precautions for product use Please do not hit, shake or throw the product violently to avoid failure; Please do not put the product near the microwave oven or high-voltage equipment, otherwise the circuit may be damaged; It is forbidden to be close to fire source and water source when using; It is strictly forbidden to disassemble or modify the product, otherwise it will cause damage, leakage and circuit failure. 3.
5.0 Bluetooth LE. For more details, pls refer to the user manual.]…… is in conformity with the relevant Union harmonization legislation: Radio Equipment directive: 2014 / 53 / EU and other Union harmonization legislation where applicable: with reference to the following standards applied: EN 62368-1:2014+A11:2017 EN 301 489-1 V2.2.3(2019-11); EN 301 489-17 V3.2.4(2020-09) EN 300 328 V2.2.
the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.