Manualshelf

Product Description

ManualsBrandsZhejiang Joytech Electronics ManualsElectronicswireless keypad
123
1
Wireless Keypad Manual
Warnings:
1. Note that automatic gate and door systems must be installed exclusively by qualified technical personnel in full compliance with statutory legislation.
2. Before starting the installation procedure check that the values given in the "Technical Specifications “chapter are compatible with the application.
3. This product has been designed to control door openers, gate openers and similar mechanisms. Any other use of the product will be considered
improper.
Packing list
No.
1
2
3
Picture/Name
Wireless keypad
Screws
Manual
Allen wrench
Technical parameters:
7. Number of passwords: 0 to 8 digits
8. Launch distance: Wide distance 200 meters,indoor distance 35 meters
9. Protection level: IP54
10. Dimensions: 85 × 75 × 35mm
11. Weight: 150g
1. Power supply: 6VDC 2 CR2032 (230mAh) lithium battery
2. Battery life: about 2 years, based on 10 times per day
3. Operating frequency: 433.92 MHz +/-75 KHz
4. Encoding format: HCS101 standard format
5. Working temperature: -20 ° C ~ +55 ° C
Product description
1. This is a dual channel transmitters that are activated only after having entered a Suitable combination.
2. The units are designed for installation in indoor or outdoor locations.
3. That ensures the utmost security because the transmitted code is changed at each transmission session.
4. The estimated transmission range is 200 m in open space and 35 m indoors.
5. The units are designed to ensure battery life equivalent to an estimated 2 years of operation considering 10 transmissions/day.
Function description
Automatic lighting: when the ambient light is insufficient, the button input signal led automatically lights up;
Automatic standby: when there is no input signal for 10 seconds, the system automatically enters the power-saving standby state;
Audible signal
status
1 short beep
Keypad tone
1 long beep
Change password successfully (or transmit code)
3 long beeps
Modification of combination confirmed
5 short beeps
Error during combination put or combination edit operation
10 rapid beeps
Battery low warning signal New batteries required
Low Voltage Alarm: When the cell voltage is under 4 volts, each time after pressing the button, it’ll make a beeping sound twice.
Installation
Step1: Tools (A&B or A&C)
Screwdriver
Allen wrench
Hand electric drill
Hammer and nail
A
B
C
Step2: Installation
Note:
1. Before physically installing it in their mounting position it is good practice to perform a practical test to assess their functionality and effective range.
2. Consider that range may be up to 25 or 30% less when battery power is low.

Summary of content (3 pages)