User Instructions

JCF35V-X instruction
一、Product name: medical foot switch
Medical foot switch as shown in figure 1
Figure 1
二、Model
JC F35V-X（X=1,2，3，4）X said control controller using the number of push rod, 1 can control a push rod, 2 said can
control two putter
三、Product features and USES
The product is suitable for use in the medical field, mainly for medical electric bed, main function back lifting, leg lift and
before and after the whole bed
Foot switch function from left to right in the order：M1 rose，M1 decline，M2 rose，M2 decline，M3 rose，M3 decline，
And all are moving。
According to the system diagram wiring system, alternating current (ac), after the completion of the electricity, the
specific function is as follows:
Press SW1 key, push rod M1 rose, LED1 lights.
Press SW2 key, push rod M1 decline, LED1 lights
Press SW3 key, push rod M2 rose, LED1 lights。
Press SW4 key, push rod M2 decline, LED1 lights。
Press SW5 key, push rod M3 rose, LED1 lights。
Press SW6 key, push rod M3 decline, LED1 lights。
四、Scope of application
The control of medical electric bed foot switch
五、working conditions
a）Ambient temperature：5℃～40℃
b）Relative humidity：No greater than 80%
c）Atmospheric pressure：860 hPa～1060 hPa；
六、transportation
a）Ambient temperature：-5℃～80℃
b）Relative humidity：No greater than 95%
c）Atmospheric pressure：830 hPa～1100 hPa；
七、Technical parameters