Packing List Dash Camera×1 Car Charger×1 Power Cable×1 Electrostatic Sticker×1 Quick Start Guide×1
Camera Introduction Camera Installation Cut off the power supply before installing TF card. Bracket Lens TF Card Slot Wipe the front windshield clean. Stick the electrostatic sticker on the glass and ensure that it is free of bubbles. Insert one end of the power cable into the USB power port. Tear off the 3M glue on the bracket, paste the dash camera on the electrostatic sticker, and lay cable as shown in the figure.
Operating with App Download and register the App Scan the following QR code to download and install the App. iOS Android Run the App, select and connect Wi-Fi of the camera. After successful connection to the camera, you can set parameters and real-time preview video. Factory Default Information Model Wi-Fi DH_M1_I6_XXXX DH_M3_I6_XXXX Password 12345678 1234567890 Command Function Open recording Start recording, and the recorded video contains sound.
FAQ If some functions do not work properly or the relevant setting values are changed, try restarting the camera or restoring the factory settings. Q: The dash camera is frequently powered off? A: Confirm whether the power cable of the dash camera is connected normally and whether each port is loose. Ensure that the power cable of the dash camera is normal and free from damage. Q: The dash camera can not be started? A: Confirm whether the vehicle is started and whether the power supply is normal.