Document Symbol Number:HS-AP-PR001 ESL ACCESS POINT HS_C09851 PRODUCT MANUAL Document Version 01 Release Date 2016-09-30 ALL RIGHTS RESERVED
ESL Access Point HS_C09851 PRODUCT MANUAL Target Audience This document introduces the uses, functions, hardware parameters, performance characteristics and precautions for Electronic Shelf Labels Access Point.
ESL Access Point HS_C09851 PRODUCT MANUAL Catalog 1 Overview .................................................................................................................................. 4 1.1 Instruction to ESL Access Point ............................................................................................ 4 1.2 System Architecture and AP Functions ................................................................................ 4 1.3 HS-C09851 Characteristics ................................
ESL Access Point HS_C09851 PRODUCT MANUAL 1 Overview 1.1 Instruction to ESL Access Point HS_C09851 is the second generation of ESL Access Point system developed by HANSHOW. It operates in the 2.4G wireless frequency range and is responsible for data transmission and information exchange between ESL-Working system and ESL system.
ESL Access Point HS_C09851 PRODUCT MANUAL Figure 1-1ESL System architecture diagram HS_C09851 is an important part of Hanshow electronic shelf label system, it as a data transmission link responsible for the important task of data forwarding: (1) Forwarding uplink data:The ESL Access Point connected to ESL-Working over a wired network, to sent send the price changes, inventory, templates and other data to ESL; (2) Forwarding downlink data:The ESL Access Point operates in the 2.
ESL Access Point HS_C09851 PRODUCT MANUAL 2.2 Configuration and Appearance 2.2.1 Basic Configuration HS_C09851 Configuration Power Module Input voltage 12V DC Rated current 1A Rated power 12W Other Overload / overvoltage / over temperature protection Host Processor Module CPUFreq. 720MHz ARMprocessor Storage 512M FLASH + 512M RAM OS Embedded Linux system RF(2.4G Module) Working Freq. 2.402~2.
ESL Access Point HS_C09851 PRODUCT MANUAL Standard IEEE 802.3 , pre-standard(legacy) POE compatible Power consumption Idle state power 12V,300mA consumption Working state 12V,450mA maximum power consumption 2.2.
ESL Access Point HS_C09851 PRODUCT MANUAL Table 2-1 AP interface and function description Interface Name 1 Power source adaptor interface 2 Functional description 12V-1A standard adapter access, Hanshow provide standard 12V adapter Restore factory settings button,Press this button for more than 5 seconds, the configuration can be reset. After reset, the Reset button system automatically loads the default settings; do not need to restart the ESL Access Point.
ESL Access Point HS_C09851 PRODUCT MANUAL Figure 2-3 ESL Access Point front panel diagram Table 2-2 ESL Access Point front panel Number Name State Meaning The ESL Access Point is connected to esl- 1 Access Point serial On of the current ESL Access Point,range 1 – 99.
ESL Access Point HS_C09851 PRODUCT MANUAL Caution POE and DC power supported IP address and MAC address are default setting. IP address can be modified on configuration page. 2.2.3 AP Appearance Parameters Table 2-4 ESL Access Point appearance parameters Materials Face shell and ABS plastic material bottom shell Indicator lamp Translucent PC cover Dimension Length(mm) 218.2 Breadth(mm) 142.
ESL Access Point HS_C09851 PRODUCT MANUAL 3 ESL ACCESS POINT INSTALLATION 3.1.1 Installation requirements In actual use, the ESL Access Point should be installed in a higher position to achieve better transmission and coverage, as shown in Figure 3-1. Figure 3-1 ESL Access Point installation diagram Note: the H in the diagram, is suggested to be between 3 to 3.5 meters to cover a area of raduis of 15 meters 3.1.
ESL Access Point HS_C09851 PRODUCT MANUAL Figure 3-3 ESL Access Point mounting accessories Note Accessories are to set the Access Point up on the ceiling.
ESL Access Point HS_C09851 PRODUCT MANUAL The Access Point support http page configuration. Login coorespoding webpage via IP address to modify the settings of Access Point. For example, login http:192.168.51.100 for the Access Point IP address is 192.168.51.100. Figure 5-1 ESL Access Point configuration landing page Default password:admin.
ESL Access Point HS_C09851 PRODUCT MANUAL Figure 5-2 ESL Access Point shortcut design interface The configuration page contains: (1) Network configuration: Access Point network settings, like DHCP switched IP address, subnet mask, etc. (2) ESL-working configuration: set the ESL-working system IP address and port. (3) Restart Access Point: reset Access Point software. (4) Change password:change the login password. (5) Restore factory settings:reset all the Access Point settings.
ESL Access Point HS_C09851 PRODUCT MANUAL Figure7-1ESL Access Point package 7.2 Pack Contents Package includes: 1 ESL Access Point, 4 white antennas, 1 AC-DC 12V power adapter, 1 mounting kit and 5 screws. 8 NOTICE OF PERATION 8.1 Installation Caution Please use the standard power adapter; Installation height of 3 to 3.5 meters; ESL Access Point covers a radius of 15 meters; ESL Access Point to avoid placing metal interference around the periphery.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.