Safety Instructions

1 2 3
Peel 3M™ adhesive mounting and press the
flexible LED strip into place.
For 6.5-ft LED Strips:
Plug the LED strip into the 5V USB controller
cable (
3.8 ft) and then the cable into any USB port
(TV or PC) or USB power supply (not included).
CAUTION: 6.5-foot LED Strips should only be
plugged into 5V USB ports.
6.5-foot LED Strips USE ONLY WITH CLASS 2
POWER UNIT
CAUTION: To reduce the risk of fire, do not install
closer than 0.5 inches to cabinet wall or in a
compartment smaller than 20 inches by 40
inches by 12 inches.
The LED Strip should be installed on smooth
surface, e.g. metal, plastic, wood, or glass.
INSTALL LED LIGHT BULBS USING YOUR REMOTE
POWER OFF
POWER ON
(PRESS FOR WHITE LIGHT)
COLOR RING
• SELECT THE COLOR
OF YOUR MOOD
BRIGHTNESS
• MAKES LIGHTS
BRIGHTER OR DIMMER
SPEED
• MAKE LIGHTS
CHANGE COLORS
FASTER OR SLOWER
PRESET LIGHT
PROGRAMS
MEMORY FUNCTION
• CHOOSE FROM EIGHT PRESET
AUTO PROGRAM MODES
• Long press to record the
current status
• Choose from memory programs
• Include
AAA BATTERIES REQUIRED (NOT INCLUDED)
Battery Warning Statement
Do not mix old and new batteries and Do not mix alkaline,
standard (carbon-zinc) or rechargeable (ni-cad, ni-mh, etc.) batteries.
1 2 3
Speed+
Speed-
TO UNPAIR
Repeat above but instead of “Speed+”
press “Speed-”.
PAIRING
By default, all Monster IlluminEssence LED
strips and LEDlight bulbs will be paired out
of the box with the included remote control.
TO PAIR
To pair LED strips or LED light bulbs to another
remote, simply unplug and replug back in the
LED strip or lamp to power and WITHIN FIVE
SECONDS of plugging back into power, press
and hold the “Speed+” until the lights blink
three times.
EXPAND
EXPAND LIGHTS AND ROOMS
You can pair up to four remotes with up to 30
Monster IlluminEssence LED strips or LED
light bulbs.
You can have multiple remotes control the
same set of lights.
You can also have dierent sets of lights paired
to dierent remotes to control
rooms independently.
INSTALL LED STRIPS
INPUT
TUPTUO
G
R
B
G
R
B
COLOR RING
Choose the color of your lights.
BRIGHTNESS
Dim from 10% - 100%.
PRESET LIGHT PROGRAMS
Eight dierent auto programs for parties,
lounging, and special occasions.
SPEED
Adjust program speeds faster for parties and
slower for an elegant change of atmosphere.
FOR TECHNICAL SUPPORT GO TO:
www.monsterstore.com/pages/contact-us
OR CALL: 1 [phone]
GET HELP
For Instructional Videos:
www.youtube.com/monsterilluminessence
GET INSPIRED
Subscribe to our Pinterest boards to
learn all the cool things you can do
with Monster IlluminEssence.
For Ideas and Inspiration:
www.pinterest.com/monsterilluminessence
Model Number
190712-00
190714-00
190725-00
Model Name
6.56FT 5V RGB Strip & 5V RF Strip Controller
7W RGB Bulb
RGBW RF 2.4GHz Remote
85
348
Federal Communication Commission
Interference Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void
the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV
technician for help.
The Responsible (located within the United States)
party information:
Company Name: Monster, Inc.
Address: 280 Old County Rd # 435
Brisbane, CA 94005-1301, USA
Telephone Number: 415-840-2000
Email: [e-mail]
The name and model number of the product:
Magenta Purple Blue Red
CLUB 1
Cyan Turquoise Green Red Purple BlueMagenta Orange
CLUB 2
Magenta Purple Blue Red
LOUNGE
Cyan
Turquoise Green
BEACH
OrangeYellow Sunset
SUNSET
RedGreen
CHRISTMAS
BlueRed
INDEPENDENCE
PurpleOrange
HALLOWEEN
rm 880186-00
1 2 3
IMPORTANT SAFETY
INSTRUCTIONS
READ AND FOLLOW
ALL SAFETY
INSTRUCTIONS
Lighted lamp is HOT!
WARNING – To reduce the risk
of FIRE OR INJURY
CAUTION – Use indoors only.
CAUTION – Risk of Electric Shock
CAUTION – Hot surface.
Keep away from
curtains and other
combustible
materials.
Turn o power and allow to cool before
replacing lamp.
Do not touch hot lens, guard,
or enclosure
Keep lamp away from materials that
may burn.
Do not touch the lamp at any time.
Use a soft cloth. Oil from skin may
damage lamp.
Do not operate the luminaire with
a missing or damaged shield.
Do not use if there is any damage to the
light or cord insulation.
Inspect periodically.
THIS DEVICE IS NOT INTENDED FOR
USE WITH EMERGENCY EXITS.
SAVE THESE
INSTRUCTIONS
122048-00 INCLUDES:
1 x RF Remote Control
1 x LED Lihgt Bulb
122047-00 INCLUDES:
1 x RF Remote Control
1 x LED Strip