User's Manual

Wireless Door Detector
User's Manual
V1.0.0
Foreword
General
This manual introduces the functions and operations of the wireless
door detector (hereinafter referred to as "the door detector").
Safety Instructions
The following categorized signal words with defined meaning might
appear in the manual.
Signal Words Meaning
Indicates a potential risk which, if not avoided, could
result in property damage, data loss, lower performance,
or unpredictable result.
Provides additional information as the emphasis and
supplement to the text.
About the Manual
●
The manual is for reference only. If there is inconsistency between
the manual and the actual product, the actual product shall prevail.
●
We are not liable for any loss caused by the operations that do not
comply with the manual.
●
The manual would be updated according to the latest laws and
regulations of related regions. For detailed information, see the
paper manual, CD-ROM, QR code or our official website. If there
is inconsistency between paper manual and the electronic version,
the electronic version shall prevail.
●
All the designs and software are subject to change without prior
written notice. The product updates might cause some differences
between the actual product and the manual. Please contact
the customer service for the latest program and supplementary
documentation.
●
There still might be deviation in technical data, functions and
operations description, or errors in print. If there is any doubt or
dispute, please refer to our final explanation.
●
Upgrade the reader software or try other mainstream reader
software if the manual (in PDF format) cannot be opened.
●
All trademarks, registered trademarks and the company names in
the manual are the properties of their respective owners.
●
Please visit our website, contact the supplier or customer service if
there is any problem occurred when using the device.
●
If there is any uncertainty or controversy, please refer to our final
explanation.
Important Safeguards and Warnings
The following description is the correct application of the device. Read
the manual carefully before use to prevent danger and property loss.
Strictly conform to the manual during application and keep it properly
after reading.
Operating Requirements
●
Do not install the device in a humid, dusty or fuliginous area.
●
Keep its horizontal installation, or install it at stable places, and
prevent it from falling.
●
Do not drip or splash liquids onto the device; do not put on the
device anything filled with liquids to prevent liquids from flowing into
the device.
●
Do not dismantle the device arbitrarily.
●
Transport, use and store the device within allowed humidity and
temperature range.
●
Do not place the accessory in the places close to radio interference
sources, such as metal objects.
Power Requirements
●
Use batteries according to requirements; otherwise, it might result
in fire, explosion or burning of batteries.
●
To replace batteries, use the same type of batteries.
●
Use standard power adapter matched with this device. Otherwise,
the user must undertake resulting personnel injuries or device
damages.
●
Use power supply that meets SELV (safety extra low voltage)
requirements, and supply power with rated voltage that conforms
to Limited Power Source in IEC60950-1. For specific power supply
requirements, refer to device labels.
●
Products with category I structure shall be connected to grounded
power socket.
●
Appliance coupler is a disconnecting device. During normal use,
keep an angle that facilitates operation.
●
Use the accessories regulated by the manufacturer. The device
must be maintained by professionals.
1
Introduction
Door detector is a wireless detector consisting of a sensor and a
magnet that can send a signal to the hub and trigger an alarm when an
armed door is opened. It can be set up via the DMSS App for iOS and
Android phones.
2
Checklist
Figure 2-1 Checklist
Quick start guide
Legal and regulatory
information
1
2 3
4
5
6
Table 2-1 Checklist
No. Item Name Quantity No. Item Name Quantity
1 Door detector 1 4 Quick start guide 1
2
Double-sided
adhesive tape
1 5
Legal and regulatory
information
1
3 Cable 1 6 Screw package 2
3
Design
3.1 Appearance
Figure 3-1 Appearance
1
2
3
4
5
Table 3-1 Structure
No. Name Description
1 Indicator
●
Flashes green quickly: Pairing mode.
●
Solid green: Alarm event is triggered.
2 Peripheral port Connect the peripheral with the alarm cable.
3 On/Off button Turn on or turn off the door detector.
4 Tamper button
The tamper mode of the accessory, which reacts to
the detachment of the body.
5 Lid
●
Normal status : Lid closed.
●
Abnormal status: Lid open.
3.2 Dimensions
Figure 3-2 Dimensions (mm[inch])
100.22 [3.9]
20.99 [0.8]
21.30 [0.8]
4
Connecting to the Hub
Prior to connection with the hub, install the DMSS App on your phone.
Make sure that you have installed the latest version of the App.
Interfaces and functions might vary with different added devices,
and the actual interface shall prevail. This manual takes iOS as an
example.
1.
●
Make sure that you have already created an account, and
added hub to the application.
●
Make sure that the hub has stable internet connection.
●
Make sure that the hub is disarmed.
Step 1 Go to the hub interface, and then tap to add the detector.
Step 2 Tap to scan the QR code at the bottom of the door detector,
and then tap Next.
Step 3 Tap Next after the door detector has been found.
Step 4 Follow on-screen instructions and switch the door detector to
on, and then tap Next.
Step 5 Wait for the pairing.
Step 6 Customize the name of the door detector and select the area,
and then tap Completed.
5
Installation
Prior to installation, connect the door detector to the hub and check the
signal level at the installation location. We recommend installing the
door detector in a place with the signal strength of at least 2 bars.
We recommend installing the door detector with expansion screws.
Figure 5-1 Installation
1 2
3
4
5
6