User's Manual

Wireless Keyfob
User's Manual
V1.0.0
Foreword
General
This manual introduces the functions and operations of the wireless
keyfob (hereinafter referred to as "the keyfob").
Safety Instructions
The following categorized signal words with defined meaning might
appear in the manual.
Signal Words Meaning
Indicates a potential risk which, if not avoided, could result
in property damage, data loss, lower performance, or
unpredictable result.
Provides additional information as the emphasis and
supplement to the text.
About the Manual
●
The manual is for reference only. If there is inconsistency between
the manual and the actual product, the actual product shall prevail.
●
We are not liable for any loss caused by the operations that do not
comply with the manual.
●
The manual would be updated according to the latest laws and
regulations of related regions. For detailed information, see the
paper manual, CD-ROM, QR code or our official website. If there
is inconsistency between paper manual and the electronic version,
the electronic version shall prevail.
●
All the designs and software are subject to change without prior
written notice. The product updates might cause some differences
between the actual product and the manual. Please contact
the customer service for the latest program and supplementary
documentation.
●
There still might be deviation in technical data, functions and
operations description, or errors in print. If there is any doubt or
dispute, please refer to our final explanation.
●
Upgrade the reader software or try other mainstream reader
software if the manual (in PDF format) cannot be opened.
●
All trademarks, registered trademarks and the company names in
the manual are the properties of their respective owners.
●
Please visit our website, contact the supplier or customer service if
there is any problem occurred when using the device.
●
If there is any uncertainty or controversy, please refer to our final
explanation.
Important Safeguards and Warnings
The following description is the correct application of the device. Read
the manual carefully before use to prevent danger and property loss.
Strictly conform to the manual during application and keep it properly
after reading.
Operating Requirements
●
Do not install the device in a humid, dusty or fuliginous area.
●
Keep its horizontal installation, or install it at stable places, and
prevent it from falling.
●
Do not drip or splash liquids onto the device; do not put on the
device anything filled with liquids to prevent liquids from flowing into
the device.
●
Do not dismantle the device arbitrarily.
●
Transport, use and store the device within allowed humidity and
temperature range.
●
Do not place the accessory in the places close to radio interference
sources, such as metal objects.
Power Requirements
●
Use batteries according to requirements; otherwise, it might result
in fire, explosion or burning of batteries.
●
To replace batteries, use the same type of batteries.
●
Use standard power adapter matched with this device. Otherwise,
the user must undertake resulting personnel injuries or device
damages.
●
Use power supply that meets SELV (safety extra low voltage)
requirements, and supply power with rated voltage that conforms
to Limited Power Source in IEC60950-1. For specific power supply
requirements, refer to device labels.
●
Products with category I structure shall be connected to grounded
power socket.
●
Appliance coupler is a disconnecting device. During normal use,
please keep an angle that facilitates operation.
●
Use the accessories regulated by the manufacturer. The device
must be maintained by professionals.
1
Introduction
Wireless keyfob is a miniature remote that connects to the hub and
controls the alarm system in your home. It works by sending wireless
communication signals to the alarm system, which will recognize the
signal and then perform the function that is assigned to the area.
2
Checklist
Figure 2-1 Checklist
Quick start guide
Legal and regulatory
information
1
2 3
4
Table 2-1 Checklist
No. Item Name Quantity
1 Wireless keyfob 1
2 String 1
3 Quick start guide 1
4 Legal and regulatory information 1
3
Design
3.1 Appearance
Figure 3-1 Appearance
3.2 Function Key
Figure 3-2 Function key
1
2
3
4
5
Table 3-1 Description of function key
No. Name Description
1 Disarming button Press the button once to disarm the system.
2 SOS
Press the panic button, and then the keyfob will send
alarm signal to the alarm system.
3 Arming button Press the button once to arm the system.
4 Home mode
Press the home mode, and then the selected
accessories will be armed.
5 Indicator
●
Flashes green quickly: Pairing mode.
●
Solid green: Normal.
●
Solid red: The keyfob is offline.
●
Flashes green first, and then turns to red:
Connection with the hub failed.
4
Connecting to the Hub
Prior to connection with the hub, install the DMSS App on your phone.
Make sure that you have installed the latest version of the App.
Interfaces and functions might vary with different added devices,
and the actual interface shall prevail. This manual takes iOS as an
example.
●
Make sure that you have already created an account, and added
hub to the application.
●
Make sure that the hub has stable internet connection.
●
Make sure that the hub is disarmed.
Step 1 Go to the hub interface, and then tap to add the keyfob.
Step 2 Tap to scan the QR code at the bottom of the keyfob, and
then tap Next.
Step 3 Tap Next after the keyfob has been found.
Step 4 Follow on-screen instructions and press and once at the
same time, and then tap Next.
Step 5 Wait for the pairing.
Step 6 Customize the name of the keyfob, and then tap Completed.
5
Keyfob Configuration
You can view and edit general information of the keyfob.
5.1 Configuring the Keyfob
On the Hub interface, select the keyfob as needed from the accessory
list, and then you can configure the parameters of the keyfob.
Table 5-1 Keyfob parameter description
Parameter Description
Device Configuration
●
View device name, type, SN and device model.
●
Edit device name, and then tap Save to save
configuration.
Area
●
View the existing area.
●
Add the area that you want to arm, and then tap
Save to save configuration.
Control Permissions
Select the area over which the keyfob has control
permissions.
SOS Alarm
If enabled, the SOS alarm messages will be pushed
when an alarm event is detected.
Alarm-speaker Linkage
When an alarm is triggered, the accessories will report
the alarm events to the hub and alert with siren.
Alarm-video Linkage
When an alarm is triggered, the accessories will report
the alarm events to the hub and then will be linked with
videos.
Video Channel Select the video channel as needed.
Cloud Update Update online.
Delete
Delete the online accessory.
Go to the Hub interface, select the accessory from
the list, and then swipe left to delete it.
5.2 Viewing Status of the Keyfob
On the Hub interface, select the keyfob as needed from the accessory
list, and then tab to view the status of the keyfob.
Table 5-2 Status
Parameter Description
Battery Level
The battery level of the keyfob.
●
: Fully charged.
●
: Sufficient.
●
: Moderate.
●
: Insufficient.
SOS Status The status of the SOS alarm.
Program Version The program version of the keyfob.
6
Using the Keyfob
After the accessories have been added on the hub, you can operate on
the keyfob.
●
Press and once at the same time to connect with the hub.
●
Press once to enable the away mode, and then all the
accessories in the area will be armed.
Press twice if the System Integrity Check is enabled in the
hub.
●
Press once to enable the home mode, and then the selected
accessories in the area will be armed.
●
Press once to enable the disarm mode, and then all the
accessories in the area will be disarmed.
●
Press once to enable SOS.