SZ-WPIII Wireless indicator User Guide
TABLE OF CONTENT Important Specifications................................................................ 1 Keyboard Function……………………………………………………1 Symbol Icons…………………………………………………….…….2 Message .................................................................................... 3 How to totalize Current Weighing Data ...................................... 4 How to Review Reserved Data .................................... ...... ...... 4 How to How to clear data ...................................... ...... .
Important Specifications Name Range Accuracy III A/D converter speed 6 times per second A/D converter type Σ-∆ Converter Load cell excitation DC 5V Load cell connection 4 wire technique Max internal code 100million Nonlinearity <0.01 %F.
“ ” Pressing the key under weighing state can keep current data in memory (See accumulation operation for details) “ ” If have accumulation data, pressing the key can review accumulated weights and times (See accumulation operation for details) Zero “ ” Pressing the key, backlight can be opened at night, and then press the key, closed backlight. To conserve power, backlight will be automatically out in 2 minutes in no operation of stable data.
shows scale body in state of zero this symbol shows weighing data go into the steady state Displaying this symbol shows hand-held display in state of Tare. The weight value will be the net weight. shows unit is not kg shows unit is kg Message: Display Time, serial number and battery power. Or no signal, please check the Antenna or battery. Show overloading。If there is no weight on scale body, no overloaded, the down-lead from load cell to transmitter is wrong linked or cut.
How to totalize Current Weighing Data Step 1: Hang heavy on scale Step 2: Wait data stabilize (stable symbol displays) Step 3: Press“ ” Step 4: Instrument will display “Total accumulative data” and “accumulative times” Attention: ■ Zero and minus weight cannot be accumulated ■ Operate until stable symbol displays ■ One weighing value only can be totalized for one time, cannot be repeated to accumulate. ■ Can totalize 99 sets of data,save and turn off.
■ ■ No data in memory, press “ ” instrument displays “no”.
When charging, please connect the charger to the 220V power supply, after the light on the charger turn green then insert rechargeable batteries to battery jack. Battery Safety Points The equipment is powered by 4AA battery or chargeable battery, please follow attention points: ■ Protect battery from water and short circuit. ■ Don’t link short battery connector, or else, it will damage battery and short-links. ■If battery at rest for long term, please charge every three months.
Dimensioned Drawing of Scale Notice Usage: It is widely used in industrial and mining enterprises, port terminals, commercial trade etc. environmental conditions: Tempreature-15~45 C, Humidity: 30~90%, Altitude: ≤2000m Batteries: scale body 6V/4.5AH lead-acid, indicator AA 1.5V X4 Installation Instructions: Transport: Scale body and indicator belong to the precision measuring instrument. Balance body should be placed in small cart, please pay attention to light moving and handling.
shackle or any other component is cracked or distorted; Whether the pin is off or the components are lost. If there is any sign of the mentioned condition, please send the scale or components back to the manufacturer for repair or exchange before using the scale again. Please do not weigh exceed the maximum capacity of the scale. Any damages caused by overloading should be responsible by yourself. ■ Please check the instruments like hook, shackle and indicator etc. every three months.