HYPERVIBE PRO OWNERS MANUAL 7
Contents Introduction 2 Gravity Resistance Training (GRT) 3 Benefits of GRT 5 Instruction Manual 6 Important Health Precautions 11 Machine Installation 13 QuickFix Twist-Lock Anchor System 15 Safe & Effective Use 20 Getting started 21 Software Guide 22 Specifications 22 Maintenance 23 Troubleshooting 24 1|Page
Introduction Congratulations on your purchase of the Hypervibe G17 Pro, Gravity Resistance Training machine. The G17 Pro is the result of years of technical experience and health expertise, brought together to bring you the most advanced home & clinical use vibration platform the world has ever seen. All vibration machines fall into one of two categories, Pivotal or Lineal, which refers to the motion of the vibrating platform.
Gravity Resistance Training (GRT) There is a wide spread myth about Whole Body Vibration originating in Russia during the 70’s and used for the health of their cosmonauts and the performance of their Olympic athletes. The reality is that modern Whole-Body Vibration began in Germany during the mid-nineties.
responsible for many of the physical issues we face? No matter how you look at it, the fundamental need to maintain our ability to counter gravity is what defines our strength, stability, balance, function, and most importantly, our healthy lifestyle. It’s time to stop just shaking the body and begin to actually improve its performance and integrity. It’s time for Whole Body Vibration to become Gravity Resistance Training.
Benefits of GRT At the time this was written, the effects of GRT had been studied for almost 20 years, with hundreds of clinical papers published in scientific journals.
Instruction Manual Familiarize yourself with this manual and look it over carefully. Be sure you understand the control panel operation and the safe exercise positions before using the G17 Pro. This manual includes basic information on starting an exercise program and safety tips that will assist you in reaching your goals for a healthy lifestyle.
2. Always unplug this machine from the electrical outlet immediately after using and before cleaning. WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons: : 3. The machine should never be left unattended when plugged in. Unplug from outlet when not in use and before putting on or taking off parts. • Do not operate under blanket or pillow. Excessive heating can occur and cause fire, electric shock or injury to persons.
administered. 8. To disconnect, turn all controls to the off position then remove plug from outlet. 9. Avoid sprinkling water or cleaning the unit with a wet sponge. 10. Always unplug the power cord before cleaning the machine. Use a damp cloth and immediately follow with a clean dry cloth. 11. Keep children away from the machine when in operation and avoid fingers near the platform gap. SAVE THESE INSTRUCTIONS ! WARNING – CONNECT THIS APPLIANCE TO A PROPERLY GROUNDED OUTLET ONLY.
GROUNDING CONDUCTOR CAN RESULT IN A RISK OF ELECTRIC SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICEMAN IF YOU ARE IN DOUBT AS TO WHETHER THE PRODUCT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE PRODUCT. IF IT WILL NOT FIT THE OUTLET, HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN. This product is for use on a nominal 120V circuit (North America) or 240V (Asia Pacific/Europe) and has a grounding plug that looks like the plug illustrated in sketch A in Figure 1.
Places to avoid Avoid placing the machine anywhere that could become wet, damp or subject to moisture, such as: • Balcony or veranda • Screened porch, porch or deck • Carport Places to look for • Dry, dust free • Hardwood, tile or carpet over solid concrete foundation • Nearby standard, grounded three prong electrical outlet Non-compliance with these warnings may lead to physical injury, accidents, damaged to the machine or fire, and may void warranty.
Important Health Precautions The following conditions do not necessarily exclude you from using the G17 Pro, however, if you suffer from any of the following conditions please confirm with your physician before using the machine: • Serious cardiovascular disease • Metal implants • Pacemaker • Artificial joints • Severe diabetes • Recent infections • Severe migraines • Malignant tumours • Recently placed IUD’s, metal pins, or plate • Recently implanted stents Conditions that are not suitable for use on the H
physician has been consulted. Possible side-effects you may experience when using your hyper- vibe machine include: • Skin lesions or blisters - These can be prevented by wearing shoes, socks or placing a foam mat on the platform. • Nausea, dizziness or temporary drop in blood pressure - Stop exercising immediately and reduce the intensity of your training program. A fall in blood sugar levels - Diabetics should be aware of this and should not exercise on an empty stomach.
Machine Installation Step 1 - Connect the base unit wire connector (H) to the lower post wire connector (G). - Install post (A) onto the base unit (B). - Fasten the post (A) to base unit (B) using the wrench (I), with bolts (D&E). Step 2 - Connect the control panel wire connector (K) to the upper post wire connector (J).
14 | P a g e
QuickFix Twist-Lock Anchor System The G17 Pro features the all new QuickFix - Twist-Lock Anchor System, a mechanism which allows quick and efficient connection of upper body vibration straps, and other attachment accessories. The G17 Pro comes supplied with two upper body vibration straps, which can be attached to the QuickFix socket points on the vibration platform and used in a variety of upper body exercises.
Instructions To connect a QuickFix attachment accessory to the G17 Pro platform, simply align the locking pin with the socket, insert the pin and turn counter-clockwise. To disconnect simply turn the locking pin clockwise and then remove. Note: QuickFix attachment accessories should only be connected to the machine when they are being used. If they are left connected to the machine and are not in use, they will create excessive noise.
Safe & Effective Use If you are not excluded from using the machine due to a health condition, the G17 Pro can be used by almost everyone. However, the key to success when using the G17 Pro is safe and effective use.
The combined frequency and amplitude settings determine the intensity level, and the G17 Pro displays the intensity levels at the top of the screen via the G Force panel. As a general rule, beginners should stay below 4g’s, and advanced users only above 8g’s.
Exercise It is important you only choose to perform exercises which are appropriate for your ability, and likewise performing those exercises correctly, as incorrect posture can cause harm and injury. Switching on your core muscles by drawing your belly towards your spine, will increase core stability and help maintain your posture. It is important to maintain balance during exercises.
are on the platform, but be aware that this will also reduce the intensity to a degree. You may also wish to use the Hypervibe workout mat when lying on the floor in front for your comfort and protection. For safety and maximum vibration transfer to the body, wear socks or thin-soled rubber shoes. Bare feet or hands on the platform be the most efficient transfer of vibration, but can cause blistering.
Getting Started The G17 Pro has a manual mode for custom use of the machine, and then over 30 pre-installed programs categorized by 5 Goal categories. 1. Active Aging 2. Weight Loss & Fitness 3. Women’s Health & Beauty 4. Performance & Recovery 5. Relieve & Revive We recommend you begin using the G17 Pro by starting with one of the installed beginner programs. We suggest you choose a program from a Goal category that is best suited to the goals you wish to achieve.
Software Guide Please refer to supplementary software guide Specifications Base unit size: 715 x 565 x 210mm Platform size: 535 x 335mm Machine set up size: 715 x 818 x 1355mm Net Weight: 76.5kg Motor: 850w - 4700rpm Vibration frequency: 5-35Hz (adjustable in 1Hz increments) Vibration amplitude: 7mm maximum (peak to peak) Vibration acceleration: 17.
Maintenance The G17 Pro is built to withstand home use, However, as the owner, you are responsible for cleaning and maintaining the unit’s integrity. If you fail to maintain the G17 Pro as described below, it could affect or void the G17 Pro limited warranty. ! DANGER: To reduce the risk of electrical shock, always unplug the unit from its power source before cleaning it or performing any maintenance tasks. ! WARNING: The G17 Pro does not contain any user-serviceable parts.
Troubleshooting PROBLEM SOLUTION There is no power to the touch screen display. Check the power lead is pushed firmly into power socket at rear of machine. Turn the power off and then back on again at the base unit. Check both the base unit wire connector, and the control panel wire connector are made firmly with the post connectors. If there is no light at the power switch on the rear of the machine, change the fuse (spare fuse is supplied inside fuse holder in mains socket).
HYPERVIBE USER MANUAL HyperWibe Gravity Health Solutions Ltd www.hypervibe.
§ 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. § 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. § 15.