User's Manual

ManualsBrandsZhan Xiang Technology ManualsElectronicsFlat Panel TV Bracket

Table Of Contents

1. Do not disassemble the product to repair by yourself .war-

ranty for electricity is void after disassembled!

2. After you installed the apparatus, please check the expan-

sion screws and all fastening devices every 3 months , and pl-

ease do not useit and contact the local dealer if it gets loose,

rusty or lost.

Warning:

Http://www.xyz888.com.cn

Mail : mail@xyz888.com.cn

(6) (1)

Temperature and humidity condition: -20℃~+50℃,80%HR

7. Maintenance

6. Notice:

Caution: This wall mount is intended for use only with the maxi-

mum weights indicated . Use with heavier than the maximum wei-

ghts indicated may result in instability causing possible injury.

5. Technical Parameters:

Item

Model

TV Size

Product

Dimension

L/R

Angle

Down

Angle

Net Weight

(mm)

Max

Installation

size

(mm)

Mix

Installation

size

(mm)

(°) (°) (°)

(kg)(kg)

(inch)

705*450*220

600*400 200*200

60 ±15

15 10

YD-C09A

Model: YD-C09A TV Wall mount

USER'S GUIDE

Check all the parts as shown on the manual included .If parts are missed

or damaged, do not use it and please return to your local distributor .

1-2. :Installation Parts

1-3. Assembly Tools (NOT INCLUDED)

Length: 705mm

Width: 450mm

Height: 220mm

1. Specification

1-1. Dimensions:

tin

g Pa

nel

Conjunctive Rack

Square Tube

cke

10MM

Remote control

Adapter

① 2pcs ② 2pcs ③ 2pcs ④ 2pcs ⑤ 2pcs ⑥ 4pcs

M5*28mm Cross

Sink Head Screw

Tab

M5*23mm Cross

Round Head Screw

Washe

Pad

Ø10*47mm

Plastic Wall Plug

⑦ 4pcs ⑧ 8pcs

Plastic-head Screw

M6*18

M6*50mm Hexagon

flange Wood Screw

⑨ 4pcs ⑩ 1pcs

1pcs

Remote control

Adapte

M6*10mm

Flat Head Screw

Cross

Pencil

Cross

screwdriver

Wrench

HammerElectric drill

Do not connect power

supply before fasten the

product.

Make sure wire and plug

are good before connecting.

Do not touch or push the

product by hand or other

object when it is working.

Check carefully to make

sure every parts fastened

tightly before use.

20mm

450mm

05m

Often to check the product, ensure the safety. Do not use corrosive

agent or alcohol or chemical cloth to clean.

8. Reliability

Summary of content (3 pages)

PAGE 1
USER'S GUIDE 5. Technical Parameters: Item Model YD-C09A Product TV Size Dimension (inch) (mm) 42 705*450*220 Max Installation size (mm) 600*400 Mix L/R Installation Loading Angle size (mm) (kg) (°) 60 ±15 200*200 Down Angle (°) 15 Up Angle Net Weight (kg) (°) ± 10 Model: YD-C09A TV Wall mount 1. Specification mum weights indicated . Use with heavier than the maximum weights indicated may result in instability causing possible injury. 1-1. Dimensions: 6.
PAGE 2
.Electric Specifications 2-1.Input Voltage/Current /Frequency, Output Current A. Input Voltage/Current /Frequency: 100-240VAC/<0.65A/50~60Hz B. Output Current:DC12V,2A 2-2.Motor Item Motor Rated Voltage Current(Not Load) Current (Rated Load) Operating Temperature DC12V -20℃~50℃ ≤0. 3 A ≤0 .6A Warning: Correct installation is extremely essential , and falls outside the scope of responsibility of manufacturer .
PAGE 3
-4.Hang TV wall mount (with TV) to the hooking gap of the mounting panel ,Then tighten the lower end of TVwall mount by⑧(2pcs) plastic head screws.(Diagram 4) Hook TV wall mount (with TV) to the hooking gap of the mounting panel ,then tighten the lower end of TV wall mount by⑧plastic head screws. 3-2. Fix the Main bracket on Locking plate by 4pcs⑨Flat Head Screw.Insert square tube (2pcs)into the holes of the conjunctive rack.