Datasheet

ManualsBrandsZETTLER ELECTRONICS ManualsRelaysPCB relays 9 Vdc 10 A 1 change-over

GENERAL DATA

Life Expectancy Minimum operations

Mechanical 5 x 10

Electrical 1 x 10

at 10 A 120 VAC Res.

Operate Time (max.) 10 ms at nominal coil voltage, standard

15 ms at nominal coil voltage, sensitive

Release Time (max.) 5 ms at nominal coil voltage

(with no coil suppression)

Dielectric Strength 1000 Vrms contact to contact

(at sea level for 1 min.) 4000 Vrms contact to coil

Insulation Resistance 1 x 10

ohms minimum at 500 VDC

Dropout Greater than 10% of nominal coil voltage

Ambient Temperature At nominal coil voltage

Operating -40°C (-40°F) to 85°C (185°F)

Storage -40°C (-40°F) to 105°C (221°F)

Vibration 0.062" DA at 10–55 Hz

Shock

Operating 10 g for 11 ms 1/2 sine pulse

(no contact opening >100 usec)

Mechanical 100 g for 11 ms 1/2 sine pulse

Enclosure P.B.T. polyester

Terminals Tinned copper alloy, P.C.

Max. Solder Temp. 270°C (518°F)

Max. Solder Time 5 seconds

Max. Solvent Temp. 80°C (176°F)

Max. Immersion Time 30 seconds

Weight 7 grams

COIL

Power

At Pickup Voltage 196 mW (Standard Coil)

(typical) 113 mW (Sensitive Coil)

Max. Continuous 676 mW at 20°C (68°F)

Dissipation

Temperature Rise 42°C (76°F) (Standard Coil)

24°C (44°F) (Sensitive Coil)

Temperature

Max. 155°C (311°F)

CONTACTS

Arrangement SPST N.O. (1 Form A)

SPDT (1 Form C)

Ratings Resistive load:

Max. switched power: 150 W or 1400 VA N.O.

90 W or 850 VA N.C.

Max. switched current:10 A N.O., 3 A N.C..

Max. switched voltage: 30 VDC or 277 VAC

UL, CUR 10 A at 125 VAC, Res., 100k cycles, 85°C

5 A at 277 VAC, Res., 100k cycles, 85°C

5 A at 30 VDC, Res., 100k cycles, 85°C

/10 HP at 125 VAC, 100k cycles, 85°C

/10 HP at 250 VAC, 100k cycles, 85°C

3 A at 277 VAC Res., 100k cycles, 85°C

3 A at 30 VDC Res., 100k cycles, 85°C

Material Silver tin oxide

Resistance < 0.1 Ohm

(24 V, 1 A voltage drop method)

AZ9405

1/8/15

10 AMP MINIATURE

POWER RELAY

FEATURES

• 10 Amp switching capability

• SPST-N.O. and SPDT configurations

• 4 kV dielectric strength

• Epoxy sealed version available

•

Class F insulation system standard

• UL, CUR file E44211

NOTES

1. All values at 20°C (68°F).

2. Relay may pull in with less than “Must Operate” value.

3. Specifications subject to change without notice.

(N.O.)

(N.C.)

•

TUV R50290833

Summary of content (2 pages)

PAGE 1
AZ9405 10 AMP MINIATURE POWER RELAY FEATURES • • • • • • • 10 Amp switching capability SPST-N.O. and SPDT configurations 4 kV dielectric strength Epoxy sealed version available Class F insulation system standard UL, CUR file E44211 TUV R50290833 CONTACTS Arrangement Ratings UL, CUR (N.O.) (N.C.) GENERAL DATA SPST N.O. (1 Form A) SPDT (1 Form C) Life Expectancy Mechanical Electrical Minimum operations 5 x 106 1 x 105 at 10 A 120 VAC Res. Max. switched power: 150 W or 1400 VA N.O. 90 W or 850 VA N.C.
PAGE 2
AZ9405 RELAY ORDERING DATA ORDER NUMBER* COIL SPECIFICATIONS – Standard Coil (SPDT and SPST) Nominal Coil VDC 3 Must Operate VDC 2.1 Max. Continuous VDC 3.9 5 3.5 6.5 6 4.2 7.8 Coil Resistance ± 10% 22.5 SPDT SPST-NO AZ9405–1A–3DF AZ9405-1C-3DF 62.5 AZ9405–1A–5DF AZ9405-1C-5DF 90 AZ9405–1A–6DF AZ9405-1C-6DF AZ9405-1C-9DF 9 6.3 11.7 202.5 AZ9405–1A–9DF 12 8.4 15.6 360 AZ9405–1A–12DF AZ9405-1C-12DF 18 12.6 23.4 810 AZ9405–1A–18DF AZ9405-1C-18DF 24 48 16.8 33.6 31.2 62.