User's Manual

DP700S USER MANUAL

1. Summary

1.1 What are DP700S?

The DP700S card reader is an essential front-end processing device for developing IC

Card related products and system integration. Applications such as access control, identity

authentication, inquiries, stored value and other smart card management systems. It utilizes

13.56MHz communication frequency and conforms to the ISO14443 Type-A protocol. It supports

non-contact smart cards conforming to ISO14443 Type-A, such as: Mifare S50, Mifare S70,

MF1ICL10, Mifare Pro, Mifare Desfire, Mifare Ultralight, Hua Hong 1102, ETC.

Power Indicator

Communication

Status Indicator

RFID Cards Reading

Area

USB Port

1.2 RFID Card Types and Functions

Item

Card Types

Functions

User Card

This card can open registered locks only

Data Card

Read the open lock records and lock information

Time Change Card

Setup lock clock

Setup Card

Write preset information into lock

Management Card

Open any lock does not clear the registered card/password

Control Card

➊ Open any lock ➋ Clear registered card/password

Authorization Card

Authorize ELMS software and locks

PAGE 1
DP700S USER MANUAL 1. Summary 1.1 What are DP700S? The DP700S card reader is an essential front-end processing device for developing IC Card related products and system integration. Applications such as access control, identity authentication, inquiries, stored value and other smart card management systems. It utilizes 13.56MHz communication frequency and conforms to the ISO14443 Type-A protocol.
PAGE 2
1.3 Operation System Composition Operation System consisted of PC based Electronic Lock Management System (ELMS) software and RFID Card. System Requirements: * OS: Windows XP/Windows7/Windows8/ Windows10, UNIX and LINUX. * Electronic Locks Management System (ELMS) * USB A-B cable 2. Operating Steps 1. Connect the DP700S to the USB port of the computer via a USB cable. Plug-and-play USB2.0 (HID Protocol), no need to install any drivers. 2. Run the ELMS software as shown in the photo below 3.
PAGE 3
FCC Information and Copyright This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.