User's Manual

USING THE KEYBOARD
remote control automatically enters the keyboard control
mode.
Note: For superscript symbols, press the Shift key and the
corresponding key at the same time. For example, Shift+1 to type ‘!’,
Shift+2 to type ‘?’
TROUBLESHOOTING
The media remote has no power or functionality.
If your remote does not perform any functions, replace the
batteries with fresh ones. Make sure that they are placed in the
right position. It may be necessary to re-pair the remote with
the USB receiver (see Step 4 on the previous page for
instructions).
Note: When low on power, the backlight lights for one second, then
blinks intermittently.
The media remote will not work with certain apps.
The media remote is designed to work with most apps.
However, some apps may not be designed for use with the
media remote. Use your Xbox One controller for these apps.
The keyboard does not work.
The USB receiver should already be paired with your remote
and should be ready to use. If the remote does not work (and
you have tried new batteries), we suggest that you try to pair
the USB receiver to the remote control.
SPECIFICATIONS
SAFETY INFORMATION/CAUTION
replace with the same type of battery.
• Do not mix old and new batteries.
• Insert batteries with the plus and minus ends in the correct
direction.
• Remove batteries when they have reached the end of their
life, or if the remote control is to be stored for an extended
period of time.
V1 ENGLISH 15-0398
Power source
External dimensions
(W×H×D)
Operating range
Operating temperature
Wireless technology
AAA batteries (2)
Approximately 7.2 × 1.8 × .82 inches
(184 × 48 × 21 mm)
<10 m
41°F~95°F (5°C~35°C)
2.4 GHz and infrared radiation
LEGAL NOTICES
FCC information
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Warning
approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com
Registered in some countries. Distributed by Best Buy Purchasing, LLC
©2015 Best Buy. All rights reserved.
Made in China
Backspace
Enter
Direction keysShift Caps lock Tabulator Space
NS-GXBOMRK101_NS-GXBOMRK101-C_15-0398_QSG_V1_EN.ai 2 5/5/2015 5:06:02 PM
RSS-Gen and RSS-210 statement:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired operation of
the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de
brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctio
nnement.
RSS-102 Statement:
This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled
environment.
Cet équipement est conforme à l'exposition aux rayonnements Industry Canada limites établies pour un
environnement non contrôlé.