RE40 Development Kit Quick Start Guide
RE40 RFID Module Warranty For the complete Zebra hardware product warranty statement, go to: www.zebra.com/warranty. Service Information If you have a problem using the equipment, contact your facility’s Technical or Systems Support. If there is a problem with the equipment, they will contact the Zebra Support at: www.zebra.com/support. Software Support Zebra wants to ensure that customers have the latest release of entitled software at the time of product purchase.
Quick Start Guide 3 Introduction The RE40 Development Kit Radio Engine (DKRE) Quick Start Guide describes how to start reading UHF RFID tags with the Zebra RE40 RFID Module Kit and 123RFID Desktop software tool in minutes. For more information, refer to the RE40 DKRE User Guide.
RE40 RFID Module 2. Connect the development board to your Windows PC using the micro USB data cable. 3. Connect the 5V power supply to a power source and to the development board using the micro USB power cable. 4. Observe the LED on the DKRE to indicate that the module is powered on. 5. Based on the country of operation, select a US (902-928 MHz, p/n S9025PR), EU (865-870 MHz, p/n S8655PL), or universal antenna (860-960 MHz, p/n 9000984-XLPDNB) provided in the DKRE kit. 6.
Quick Start Guide 5 Installing 123RFID Software To install 123RFID Desktop software onto your PC: 1. Copy the 123RFID Desktop file from the USB drive provided or download the software: www.zebra.com/support. 2. Open the 123RFID Desktop software by double-clicking on the 123RFID Desktop icon on your desktop. Region Configuration For initial use only, you must configure the region of operation. 1. After selecting Find Readers for the first time (see Connecting to 123RFID), click Connect.
RE40 RFID Module 7. Click on the I understand implications of setting an illegal region checkbox. 8. Select Set. 9. A successful update message window displays. Select OK. Connecting to 123RFID To Locate a reader on the local subnet or USB port using Reader Discovery: 1. Select the Find Readers button on the Welcome screen NOTE: For initial use only, the region must be configured before connecting to the reader, see Region Configuration for instructions. 2.
Quick Start Guide 3. 7 Select Connect next to the desired reader to connect. Once connected, the reader displays under Connected Readers. Reading Tags Once the device is connected, begin reading RFID tags as follows: 1. Select the Read tab to display the Data View screen. 2. Place the tags within a few inches of the read field view of the antenna. 3. Select Start to begin reading tags. For latest software, antenna specifications, and related product information, visit www.zebra.com/support.
RE40 RFID Module Regulatory Information This device is approved under Zebra Technologies Corporation. This guide applies to Model Number RE40. All Zebra devices are designed to be compliant with the rules and regulations in the locations they are sold and will be labeled as required. Local language translations are available at the following website: www.zebra.com/support.
Quick Start Guide 9 RF Exposure Guidelines Safety Information Reducing RF Exposure - Use Properly Only operate the device in accordance with the instructions supplied. International The device complies with internationally recognized standards covering human exposure to electromagnetic fields from radio devices. For information on 'International' human exposure to electromagnetic fields, refer to the Zebra Declaration of Conformity (DoC) www.zebra.com/doc.
RE40 RFID Module Radio Frequency Interference Requirements - FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Quick Start Guide 11 Marking and European Economic Area (EEA) Statement of Compliance Zebra hereby declares that this device is in compliance with all applicable Directives, 2014/30/EU, 2014/35/EU and 2011/65/EU. The full text of the EU Declaration of Conformity is available at the following Internet address: www.zebra.com/doc. China 通过访问以下网址可下载当地语言支持的产品说明书 Local language translations are available at the following website: www.zebra.
China RoHS RE40 RFID Module
Quick Start Guide Taiwan RoHS Ukraine Дане обладнання відповідає вимогам технічного регламенту № 1057, 2008 на обмеження щодо використання деяких небезпечних речовин в електричних та електронних пристроях. Turkish WEEE Statement of Compliance EEE Yönetmeliğine Uygundur.
RE40 RFID Module Waste Electrical and Electronic Equipment (WEEE) English: For EU Customers: All products at the end of their life must be returned to Zebra for recycling. For information on how to return product, please go to: zebra.com/weee. Français: Clients de l'Union Européenne: Tous les produits en fin de cycle de vie doivent être retournés à Zebra pour recyclage. Pour de plus amples informations sur le retour de produits, consultez : zebra.com/weee.
Quick Start Guide 15 Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kierrätettäväksi Zebra-yhtiöön, kun tuotetta ei enää käytetä. Lisätietoja tuotteen palauttamisesta on osoitteessa zebra.com/weee. Dansk: Til kunder i EU: Alle produkter skal returneres til Zebra til recirkulering, når de er udtjent. Læs oplysningerne om returnering af produkter på: zebra.com/weee. Ελληνικά: Για πελάτες στην Ε.Ε.
www.zebra.com ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. ©2020 Zebra Technologies Corporation and/or its affiliates. All rights reserved. MN-003711-01EN Rev.
