MC2200/MC2700 D ra ft v1 Mobile Computer Quick Start Guide MN-004030-02EN Rev.
MC2200/MC2700 Quick Start Guide Copyright ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. ©2020 Zebra Technologies Corporation and/or its affiliates. All rights reserved. COPYRIGHTS & TRADEMARKS: For complete copyright and trademark information, go to www.zebra.com/copyright. WARRANTY: For complete warranty information, go to www.zebra.com/warranty.
MC2200/MC2700 Quick Start Guide Unpacking To unpack the device: 1. Carefully remove all protective material from the device and save the shipping container for later storage and shipping. 2. Verify that the following were received: • Mobile computer • PowerPrecision Lithium-ion battery • Straight hand strap • Regulatory Guide. 3. Inspect the equipment for damage. If any equipment is missing or damaged, contact the Global Customer Support center immediately. v1 4.
MC2200/MC2700 Quick Start Guide Table 1 Front View Features Number Item Function 1 Hand strap clip slot Use for securing the hand strap in place. 2 USB-C connector/Bottom port Provides USB host and client communications, and device charging via cables and accessories. 3 Microphone Use for communications in Handset mode. 4 Power button Turns the display on and off. Press and hold to reset the device or power off. 5 Scan button Initiates data capture when a scan application is enabled.
MC2200/MC2700 Quick Start Guide Table 2 Back View Features (continued) Number Item Function 12 Flash Provides illumination for the camera. 13 Speaker Provides audio output for video and music playback. 14 Hand strap mount Provides mounting point for hand strap accessory. 15 Back port The two pin back I/O is an electrical contact that is activated by the trigger handle.
MC2200/MC2700 Quick Start Guide 3. Lift the microSD card holder. ft v1 4. Insert the microSD card into the card holder door ensuring that the card slides into the holding tabs on each side of the door. D ra 5. Close the microSD card holder and slide into the Lock position. 6. Replace the battery. See Installing the Battery on page 8. Installing the SIM Card NOTE: Only use a nano SIM card. Not applicable to MC2200.
MC2200/MC2700 Quick Start Guide 2. Slide the SIM card holder to the unlock position. v1 3. Lift the SIM card holder door. D ra ft 4. Place the nano SIM card into the card holder with contacts facing down. 5. Close the SIM card holder door and slide into the lock position. 6. Replace the battery. See Installing the Battery on page 8.
MC2200/MC2700 Quick Start Guide Installing the Battery NOTE: User modification of the device, particularly in the battery well, such as labels, asset tags, engravings, stickers, etc., may compromise the intended performance of the device or accessories. Performance levels such as sealing (Ingress Protection (IP)), impact performance (drop and tumble), functionality, temperature resistance, etc. could be effected. DO NOT put any labels, asset tags, engravings, stickers, etc. in the battery well. 1.
MC2200/MC2700 Quick Start Guide Installing/Removing the Trigger Handle Installing the Trigger Handle Using the Hand Strap Mount ra ft v1 1. Align the hand strap mount on the back of the device with the recess on the trigger handle. 2. Rotate the trigger handle down to grab the device. D Installing the Trigger Handle Using the Battery Finger Scoop 1. Align the battery finger scoop with the recess on the trigger handle. 2. Rotate the trigger handle down to grab the device.
MC2200/MC2700 Quick Start Guide Removing the Trigger Handle Rotate the trigger handle toward the top of the device and lift up to remove. ra ft v1 Alternately, rotate the trigger handle toward the bottom of the device and lift up to remove. D Installing the Hand Strap Installing the Hand Strap on Device 1. Insert the hand strap clip into the hand strap clip slot on the bottom of the device. F 2 1 2. Feed the top end of the hand strap through the hand strap mount at the top of the device.
MC2200/MC2700 Quick Start Guide 3. Flip the strap over the hand strap mount and attach the end of the strap using the velcro. 4. Place hand between device and hand strap and adjust hand strap as necessary. Installing the Hand Strap on Device with Trigger Handle D ra ft v1 1. Loop and tie the tether end of the hand strap with the hand strap mount. 2. Insert the hand strap clip into the bottom of the device. 3. Adjust the slide button according to wrist size and place hand between the hand strap.
MC2200/MC2700 Quick Start Guide Charging the Device CAUTION: Ensure that you follow the guidelines for battery safety described in the device Product Reference Guide. Use one of the following accessories to charge the device and/or spare battery. Table 3 Accessories Accessory Part Number Description CRD-MC2X-1SCU-01 Provides device charging and allows USB Type-C communication to one device. Optional power supply WUA5V12W0WW sold separately.
MC2200/MC2700 Quick Start Guide NOTE: In many cases the 90% charge provides plenty of charge for daily use. To achieve the best fast charging results use only Zebra charging accessories and batteries. Charge batteries at room temperature with the device in sleep mode. Table 4 Charging/Notification LED Charging Indicators State Indication Off Device is not charging. Device is not inserted correctly in the cradle or connected to a power source. Charger/cradle is not powered.
MC2200/MC2700 Quick Start Guide Table 5 Spare Battery LED Charging Indicators (continued) LED Indication Solid Red Spare battery is charging and battery is at the end of useful life. Charging complete and battery is at the end of useful life. Fast Blinking Red (2 blinks/second) Error in charging; check placement of spare battery and battery is at the end of useful life. Off No spare battery in slot. Spare battery not placed in slot correctly. Cradle is not powered.
MC2200/MC2700 Quick Start Guide Table 6 1-Slot Charge/USB Cradle Features Number Charging slot D 1 ra 1 ft v1 1-Slot Charge/USB Cradle 15 Item
MC2200/MC2700 Quick Start Guide Table 7 1-Slot Charge/Communication Cradle with Spare Battery Charger Features 2 D Number 1 2 ra 1 ft v1 1-Slot Charge/Communication Cradle with Spare Battery Charger Charge/communication slot Spare battery slot 16 Item
MC2200/MC2700 Quick Start Guide 1 4 3 4-Slot Charge Only ShareCradle with 4-Slot Battery Charger Features Number ft Table 8 2 v1 4-Slot Charge Only ShareCradle with 4-Slot Battery Charger Item Power LED 2 Spare battery charging LED 3 Spare battery slot 4 Charging slot D ra 1 17
MC2200/MC2700 Quick Start Guide 1 2 5-Slot Charge Only ShareCradle Features Number ft Table 9 v1 5-Slot Charge Only ShareCradle Item Power LED 2 Charging slot D ra 1 18
MC2200/MC2700 Quick Start Guide 4-Slot Battery Charger Table 10 2 3 v1 1 4-Slot Battery Charger Features Number Item Power LED 2 Battery charging LED 3 Spare battery slot D ra ft 1 19
MC2200/MC2700 Quick Start Guide USB-C Cable 1 USB Cable Number ra USB slot D 1 Item ft Table 11 v1 The USB-C cable plugs into the bottom of the device. When attached to the device the cable allows charging, transferring data to a host computer, and connecting USB peripherals.
MC2200/MC2700 Quick Start Guide Scanning The device offers the following data capture options: • SE4100 Scanning with Internal Imager To read a barcode, a scan-enabled app is required. The device contains the DataWedge app that allows the user to enable the imager, decode the barcode data, and display the barcode content. To scan with the internal imager: 1. Ensure that an app is open on the device and a text field is in focus (text cursor in text field). 2.
MC2200/MC2700 Quick Start Guide Ergonomic Considerations Taking breaks and task rotation is recommended. Alternate left and right hand. ft v1 Optimal Posture D ra Optimize Body Posture for Low Scanning Alternate left and right knees.
MC2200/MC2700 Quick Start Guide v1 Optimize Body Posture for High Scanning D ra Avoid Bending ft Alternate left and right hand.
MC2200/MC2700 Quick Start Guide D ra ft v1 Avoid Extreme Wrist Angles 24
D ra ft v1 MC2200/MC2700 Quick Start Guide 25
v1 ft ra D www.zebra.